Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A single-channel PWM driver for M5Stack Atom controllers that handles 12-24V input and switches up to 12V@100W via MOSFET. Its built-in DC-DC converter powers the controller from the same supply, reducing wiring.

Key Highlights

  • Single-channel low-latency PWM output for precise DC control
  • Wide 12-24V DC input with built-in step-down to 5V
  • High-power MOSFET switch rated for 12V@100W loads
  • Compatible with Atom Lite, Matrix, S3, and S3 Lite
  • GROVE expansion port for adding sensors or peripherals
  • Protective cover and all-in-one design for easy mounting

Ideal For

  • Makers building Atom-based automation projects
  • Engineers needing compact PWM control for DC loads
  • Robotics hobbyists controlling motors or LEDs
  • Educators teaching PWM and power electronics
  • Prototypers using Arduino or UIFlow

Buying Tip

Confirm your load stays within 12V@100W and that you have a suitable 12-24V DC supply, since neither a power supply nor an Atom controller is included.

Elecvora expert review

Our verdict

A tidy, well-integrated PWM driver that simplifies power and control wiring for Atom-based projects. It is best suited to low-voltage DC loads within its 12V@100W rating.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated DC-DC converter reduces external components
  • High-power MOSFET supports loads up to 12V@100W
  • Compact design with protective cover
  • GROVE port for easy expansion

Cons

  • Requires a separate 12-24V power supply
  • Load must stay within 12V@100W limit
  • Atom controller sold separately

Best for

Atom users controlling DC motors, LEDs, or heaters up to 12V@100W

Not ideal for

Projects needing multi-channel PWM or loads above 12V@100W

Specifications

Item TypeSignal Generator
Shipping Weight0.02 kg
Shipping Dimensions14 × 10 × 4 cm

What's in the box

  • 1 x M5Stack ATOMIC PWM Base (EG27324)

Frequently Asked Questions

Which Atom controllers are compatible?
The base is designed for Atom Lite, Atom Matrix, AtomS3, and AtomS3 Lite.
What input voltage does it require?
It accepts a DC input between 12V and 24V. The built-in DC-DC converter provides 5V to the controller.
What is the maximum load?
The MOSFET output is rated for up to 12V@100W. Do not exceed this limit.
Is a power supply included?
No, a 12-24V DC power supply is not included and must be provided separately.
Can I use the GROVE interface?
Yes, there is one reserved GROVE expansion interface for compatible M5Stack peripherals.
How do I program it?
You can program the connected Atom controller using Arduino or UIFlow.

Overview

The M5Stack ATOMIC PWM Base (EG27324) is a compact single-channel PWM driver built for the Atom family of controllers. It lets you control the duty cycle of a DC load using a low-latency PWM signal, making it a practical interface between your controller and higher-power devices. The board accepts a 12-24V DC input and includes a DC-DC step-down circuit that supplies power to the controller, so a single power source can run both the logic and the load.

Key Features

  • Single-channel PWM output: Adjustable duty cycle for smooth control of DC devices.
  • High-power MOSFET: Handles loads up to 12V@100W, suitable for motors, LED strips, and similar loads.
  • Integrated DC-DC converter: Steps down 12V input to 5V to power the Atom controller, reducing extra wiring.
  • GROVE expansion: One reserved GROVE interface for adding compatible peripherals.
  • Protective cover: All-in-one design with a cover for safer handling and mounting.

Specifications Explained

The 12-24V DC input range means the base can work with common power supplies used in automation and robotics. The output capacity of 12V@100W indicates the maximum load the MOSFET switch can drive; for higher voltages or currents, check that your load stays within these limits. The built-in DC-DC circuit converts the input to 5V for the Atom controller, so you do not need a separate 5V supply. Low latency in the PWM signal helps when precise timing is required, such as in motor speed control or LED dimming.

Compatibility and Requirements

The ATOMIC PWM Base is designed for the Atom series main controllers, including Atom Lite, Atom Matrix, AtomS3, and AtomS3 Lite. It is programmed using Arduino or UIFlow. A separate 12-24V DC power supply is required to operate the base and the connected load. The GROVE interface allows connection of compatible M5Stack sensors or modules.

Typical Uses

This module is useful for projects that need variable control of DC loads: dimming LED lighting, adjusting the speed of small DC motors, driving heating elements, or controlling solenoids. Its compact size and protective cover make it suitable for prototyping, educational setups, and small automation builds.

What's in the Box

1 x M5Stack ATOMIC PWM Base (EG27324).

Quick specs

Item Type
Signal Generator
Shipping Weight
0.02 kg
Shipping Dimensions
14 × 10 × 4 cm
See all specifications