Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by NEXTION, this hmi lcd display is a good fit for everyday home and hobby use. Main specs: model no. / name NX8048P050 011C; touch type Capacitive; operating current (ma) 220. Check that your power source supplies 5 V before connecting it.

Key Highlights

  • Model No. / Name: NX8048P050 011C
  • Touch Type: Capacitive
  • Operating Current (mA): 220

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Model No. / NameNX8048P050 011C
Touch TypeCapacitive
Display Resolution (pixel)800 × 480
Operating Voltage (V)5 V
Operating Current (mA)220
Flash Memory120 MB
Serial Port3.3V/5.0V TTL
Brightness (NIT)300 nit
Backlight Lifetime (Avg)>30,000 Hours
Length (mm)140
Width (mm)85
Weight (g)140
Color16 bit 565, 5R-6G-5B
Shipping Weight0.198 kg
Shipping Dimensions15 × 8.5 × 3.5 cm

Overview

The Nextion Intelligent NX8048P050_011C 5.0" HMI Capacitive Touch Display, made by NEXTION, is listed in our hmi lcd display range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: NX8048P050 011C
  • Touch Type: Capacitive
  • Display Resolution (pixel): 800 × 480 (measured diagonally; compare with the space you have before ordering)
  • Operating Voltage (V): 5 V (match this to your power supply; too high a voltage can damage the part)
  • Operating Current (mA): 220 (your supply must deliver at least this much current)
  • Flash Memory: 120 MB (more memory leaves room for larger programs and buffers)
  • Serial Port: 3.3V/5.0V TTL (confirm your cable or board uses the same connector)
  • Brightness (NIT): 300 nit (lumens measure total light output; higher is brighter)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

 This is a Nextion Intelligent NX8048P050_011C 5.0" HMI Capacitive Touch Display. This display is from the Newly launched Intelligent series and is very easy to use and can be interfaced to the  Microcontroller using a simple UART port. The Nextion display can be easily interfaced with any Microcontroller using just 2 wires. Nextion displays have a built-in microcontroller that controls the display, it takes care of which button has been clicked, creating text, storing images, or change the background.

The Nextion Intelligent NX8048P050-011C 5.0" Capacitive Touchscreen Display is so simple to the interface that it can easily work with Arduino, Raspberry Pi, ESP8266, ESP32, PIC Microcontroller, AVR controller, ARM Microcontroller and even work with basic 8051 microcontrollers basically it will work with any board or Microcontroller that has UART port.

Note: the small power supply test board and connecting wire inside the package allow you to test if the electrical supply is enough or not. See the image below on how to use it.
Nextion Intelligent NX8048P050_011C 5.0" HMI Capacitive Touch Display

Features:

  1. 5” LCD-TFT HMI display module
  2. 840 x 480 screen resolution
  3. RGB 65K true-to-life colors
  4. Capacitive touch panel
  5. 300 nit Brightness
  6. Onboard 200MHz MCU

Package Includes:

1 x Nextion Intelligent NX8048P050_011C 5.0" HMI Capacitive Touch Display

Quick specs

Model No. / Name
NX8048P050 011C
Touch Type
Capacitive
Display Resolution (pixel)
800 × 480
Operating Voltage (V)
5 V
Operating Current (mA)
220
Flash Memory
120 MB
See all specifications

More from NEXTION

View all →

Related Products

View all →