Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by NEXTION, this hmi lcd display is a good fit for everyday home and hobby use. Main specs: model no. / name NX8048P050 011R Y; touch type Resistive; operating current (ma) 220. Check that your power source supplies 5 V before connecting it.

Key Highlights

  • Model No. / Name: NX8048P050 011R Y
  • Touch Type: Resistive
  • Operating Current (mA): 220

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Model No. / NameNX8048P050 011R Y
Touch TypeResistive
Operating Voltage (V)5 V
Operating Current (mA)220
Touch> 1 million
Display BacklightLED
Brightness (NIT)300nit
Serial Port3.3V/5.0V TTL
Length (mm)160
Width (mm)105
Weight (g)229
Color65K 65536 colors
Operating Temperature (°C)-20 to 70°C
Shipping Weight0.302 kg
Shipping Dimensions18.5 × 13.5 × 3.5 cm

Overview

The Nextion Intelligent NX8048P050_011R_Y HMI 5.0" Resistive Touch Display with enclosure383083, made by NEXTION, is listed in our hmi lcd display range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: NX8048P050 011R Y
  • Touch Type: Resistive
  • Operating Voltage (V): 5 V (match this to your power supply; too high a voltage can damage the part)
  • Operating Current (mA): 220 (your supply must deliver at least this much current)
  • Touch: > 1 million
  • Display Backlight: LED (measured diagonally; compare with the space you have before ordering)
  • Brightness (NIT): 300nit (lumens measure total light output; higher is brighter)
  • Serial Port: 3.3V/5.0V TTL (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

NX8048P050-011R-Y is a 5.0" Nextion Resistive touchscreen display with an enclosure that comes with a resistive touch display. This display is from the Newly launched Intelligent series and is very easy to use and can be interfaced to the Microcontroller using a simple UART port. The Nextion display can be easily interfaced with any Microcontroller using just 2 wires. Nextion displays have a built-in microcontroller that controls the display, it takes care of which button has been clicked, creating text, storing images, or change the background. The Nextion display then communicates with your microcontroller using serial communication at a 9600 baud rate.

NX8048P050-011R-Y is a 5.0'' Nextion Resistive touchscreen display with an enclosure that comes with a resistive touch display is so simple to the interface that it can easily work with Arduino, Raspberry Pi, ESP8266, ESP32, PIC Microcontroller, AVR controller, ARM Microcontroller and you won’t believe it will work even with basic 8051 microcontrollers basically it will work with any board or Microcontroller that has UART port.

Note: The small power supply test board and connecting wire inside the package allow you to test if the electrical supply is enough or not. See the image below on how to use it. Nextion Intelligent NX8048P050_011R_Y HMI 5.0 Resistive Touch Display with enclosure

Features:

  1. 5” LCD-TFT HMI display module
  2. 840 x 480 screen resolution
  3. RGB 65K true-to-life colors
  4. Resistive touch panel
  5. 300 nit Brightness
  6. Onboard 200MHz MCU
  7. 512 KB of SRAM
  8. 128 MB of Flash memory
  9. 1024 Byte EEPROM

Package Includes:

1 x Nextion Intelligent NX8048P050_011R_Y HMI 5.0'' Resistive Touch Display with enclosure

Quick specs

Model No. / Name
NX8048P050 011R Y
Touch Type
Resistive
Operating Voltage (V)
5 V
Operating Current (mA)
220
Touch
> 1 million
Display Backlight
LED
See all specifications

More from NEXTION

View all →

Related Products

View all →