Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A starter bundle built around an ESP8266 board, with a powered breadboard, an ESP shield, three sensor modules and the passives needed to wire them up. It gives you most of the small parts for a first Wi-Fi sensor project in one box.

Key Highlights

  • ESP8266 board plus matching ESP8266 shield for stacked builds
  • Breadboard with power supply module for quick, solder-free wiring
  • LDR, PIR and IR sensor modules for light, motion and proximity ideas
  • Active buzzer, LEDs, switches and 1K, 10K and 220 ohm resistors included
  • Dupont cables in male-male, male-female and female-female types
  • Packed in a plastic container box for storage and transport

Ideal For

  • Beginners learning breadboard wiring with an ESP8266 board
  • Students and club members building a first connected sensor project
  • Makers prototyping light, motion or infrared-triggered circuits
  • Arduino users adding an ESP8266 board to their parts collection

Buying Tip

Check that your project plan matches the ESP8266 board and shield in this kit before buying, since the bundle is built around that module rather than a camera board.

Elecvora expert review

Our verdict

This is a sensible first kit for anyone who wants an ESP8266 board with the supporting parts already gathered. The mix of sensors, outputs and passives covers a lot of early experiments without forcing you to buy each item separately.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Board, shield, breadboard and power module in one bundle
  • Three sensor modules plus buzzer, LEDs and switches for varied experiments
  • Resistors and three Dupont cable types cover common wiring needs
  • Plastic container box keeps small parts organised

Cons

  • No camera module is listed despite the IoT camera framing in some references
  • You must supply your own computer and code to run projects
  • The kit is built around ESP8266 rather than a more recent board

Best for

Beginners and hobbyists starting ESP8266 sensor projects

Not ideal for

Buyers who specifically need a camera-equipped board

Specifications

Item TypeKit
Model No. / NameIoT Kit
Based OnESP Module
CompatibilityArduino, ESP8266
Shipping Weight0.26 kg
Shipping Dimensions15 × 7 × 6 cm

What's in the box

  • 1 x ESP8266 board
  • 1 x breadboard with power supply module
  • 1 x ESP8266 shield
  • 1 x LDR sensor module
  • 1 x PIR sensor module
  • 1 x IR sensor
  • 1 x active buzzer
  • 1 x 10-pin Dupont cable set in MM, MF and FF types
  • 1 x red, yellow and blue 5 mm LED set, 5 pieces each
  • 1 x USB to Micro-USB cable
  • 5 x switches
  • 10 x 1K, 10K and 220 ohm resistors
  • 1 x plastic container box

Frequently Asked Questions

What board is included in this kit?
The kit includes an ESP8266 board and an ESP8266 shield. The listing describes the product as based on an ESP module and compatible with Arduino and ESP8266.
Do I need to solder anything?
The breadboard and Dupont cables are intended for solder-free wiring, so basic circuits can be built by plugging parts in. Any permanent build would be your own choice beyond the kit contents.
What can I power the kit with?
The kit includes a breadboard with a power supply module and a USB to Micro-USB cable. Use those with a suitable power source for your setup.
Which sensors are in the box?
You get an LDR sensor module, a PIR sensor module and an IR sensor. An active buzzer, LEDs and switches are also included for output and input.
Is a camera included?
No camera module is listed in the package contents. The kit is built around an ESP8266 board, an ESP8266 shield, a breadboard and sensor modules.
How should I store the kit?
Keep the parts in the included plastic container box, and avoid bending the Dupont cable pins or the board headers when packing it away.

Overview

The Pro-Range ESP8266 IoT Starter Kit is a component bundle for makers who want to move from a bare board to a working connected prototype. The centre of the kit is an ESP8266 board, paired with an ESP8266 shield and a breadboard that includes a power supply module. That combination lets you build circuits by pushing parts into the breadboard rather than soldering, so you can test an idea, change the wiring and test again.

The kit also covers the sensing and feedback side of a project. An LDR module responds to light levels, a PIR module detects motion, and an IR sensor handles simple infrared detection. An active buzzer, red, yellow and blue 5 mm LEDs and five switches give you ways to signal, indicate and control. Resistors in 1K, 10K and 220 ohm values and Dupont cables in three pin arrangements cover the usual wiring jobs.

Key Features

  • ESP-based core: an ESP8266 board and a dedicated ESP8266 shield form the processing and connection layer of your build.
  • Powered breadboard: the included breadboard with power supply module gives you a stable base for temporary circuits.
  • Three sensor modules: LDR, PIR and IR modules let you experiment with light, motion and infrared sensing.
  • Output and input parts: an active buzzer, three LED colours and five switches cover basic indication and control.
  • Passives and cables: 1K, 10K and 220 ohm resistors plus MM, MF and FF Dupont cables remove the most common small-part blockers.
  • Storage box: a plastic container box keeps the components together between builds.

Specifications Explained

The listing describes the product as a kit based on an ESP module, with compatibility listed for Arduino and ESP8266. In practice, that means the board and shield are intended for ESP8266-style projects, while the breadboard, sensors, LEDs, switches and resistors are standard prototyping parts you can also use in Arduino-style builds.

The shipping figures are modest: 0.26 kg and 15 x 7 x 6 cm. That makes the kit light enough to post cheaply and small enough to store in a drawer or carry in a bag. Because the parts arrive in a plastic container box, the shipping size roughly reflects the packed kit rather than a loose collection of components.

Compatibility and Requirements

The kit is listed as compatible with Arduino and ESP8266, and the included shield is described as an ESP8266 shield. You will need your own computer to write and upload code, and a suitable USB connection is covered by the included USB to Micro-USB cable. Any project that connects to a network will depend on the ESP8266 board and your own network setup; no additional wireless hardware is listed.

Typical Uses

Use the kit to learn breadboard wiring, to prototype a light- or motion-triggered indicator, or to build a small sensor node that reports readings over Wi-Fi. The buzzer and LEDs make it easy to add local feedback while you test logic, and the switches let you add manual input. It also works as a classroom or club kit, since the container box keeps the parts together.

What's in the Box

  • 1 x ESP8266 board
  • 1 x breadboard with power supply module
  • 1 x ESP8266 shield
  • 1 x LDR sensor module
  • 1 x PIR sensor module
  • 1 x IR sensor
  • 1 x active buzzer
  • 1 x 10-pin Dupont cable set in MM, MF and FF types
  • 1 x red, yellow and blue 5 mm LED set, 5 pieces each
  • 1 x USB to Micro-USB cable
  • 5 x switches
  • 10 x 1K, 10K and 220 ohm resistors
  • 1 x plastic container box

Quick specs

Item Type
Kit
Model No. / Name
IoT Kit
Based On
ESP Module
Compatibility
Arduino, ESP8266
Shipping Weight
0.26 kg
Shipping Dimensions
15 × 7 × 6 cm
See all specifications