Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A complete ESP32 kit that converts web-entered text into spoken audio via I2S and a MAX98357A amplifier. It includes the board, amplifier, speaker, jumper wires, and a 3D-printed enclosure for a ready-to-build TTS project.

Key Highlights

  • ESP32 board with Wi-Fi hosts a browser-based text input interface
  • I2S digital audio output for clear, low-noise sound
  • MAX98357A amplifier module drives 4–8 Ω speakers up to 3W
  • Adjustable speech parameters for speed, pitch, and clarity
  • Includes 3D-printed enclosure and jumper wires for assembly
  • Powered via 5V through the ESP32 development board

Ideal For

  • IoT learners exploring voice output projects
  • Makers building assistive technology prototypes
  • Educators demonstrating embedded speech synthesis
  • Developers prototyping smart home announcements
  • DIY enthusiasts interested in ESP32 audio applications

Buying Tip

Check that you have a 5V power source and a way to program the ESP32, as firmware is not included.

Elecvora expert review

Our verdict

This kit offers a straightforward path to a functional text-to-speech device with the flexibility of the ESP32. It is well-suited for learning and prototyping, though users should expect to source firmware and possibly solder connections.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Includes all essential hardware for a complete TTS project
  • ESP32 with Wi-Fi enables convenient browser-based control
  • I2S digital audio and MAX98357A amplifier deliver clear sound
  • Adjustable speech parameters for customization
  • 3D-printed enclosure adds a finished look

Cons

  • No firmware or software is included; users must program the ESP32
  • Basic soldering may be required for reliable connections
  • Power source (5V) is not included

Best for

Makers and learners wanting a ready-to-assemble ESP32 TTS project

Not ideal for

Users seeking a plug-and-play device with preloaded software

Specifications

ControllerESP32
Audio input/output PortI2S Digital Interface
ConnectivityWi-Fi (Web Interface)
Microphone/Speaker4–8 Ω, up to 3W Supported
InputWeb browser-based text input
Output TypeDigital audio via I2S
Amplifier TypeMAX98357A compatible
Power Supply Voltage (V)5V via ESP32
CompatibilityESP32 development boards
Weight (g)217
Sensor TypeStrain Gauge Based Load Cell
Operating Voltage (V)2.7~5.5
Shipping Weight0.23 kg
Shipping Dimensions23 × 15 × 6 cm

What's in the box

  • 1 x ESP32 Development Board
  • 1 x MAX98357A I2S Audio Amplifier Module
  • 1 x 4–8 Ω Speaker (3W)
  • 10 x Jumper Wires
  • 1 x 3D Printed Enclosure

Frequently Asked Questions

What power source does the kit require?
The kit operates on 5V, typically supplied through the ESP32's USB port or 5V pin. A suitable USB power adapter or 5V supply is not included.
Is the ESP32 board included?
Yes, the kit includes one ESP32 development board, along with the amplifier module, speaker, jumper wires, and 3D-printed enclosure.
Can I use a different speaker?
Yes, any speaker with impedance between 4 and 8 Ω and power rating up to 3W can be used with the included MAX98357A amplifier.
Do I need to program the ESP32?
Yes, the kit does not include preloaded firmware. You will need to upload a text-to-speech sketch using the Arduino IDE or another ESP32 development environment.
What is the I2S interface used for?
I2S is a digital audio protocol that transmits audio data from the ESP32 to the amplifier, ensuring clean sound quality with minimal noise.
Is soldering required?
Depending on the headers on your ESP32 board and amplifier module, some soldering may be necessary to attach pins or wires securely. The included jumper wires allow solderless connections if headers are pre-soldered.

Overview

The Pro-Range ESP32 Based Text to Speech Converter Kit is a modular DIY solution for transforming written text into real-time audio. Built around the ESP32 microcontroller, the kit leverages built-in Wi-Fi to create a web interface accessible from any browser. Users simply type text, and the ESP32 processes it using the SAM speech synthesis engine, then outputs digital audio over an I2S interface. The included MAX98357A-compatible amplifier module boosts the signal to drive the supplied 4–8 Ω speaker at up to 3W. With adjustable voice parameters and a ready-to-assemble design, this kit suits IoT learning, assistive technology prototypes, and embedded voice projects.

Key Features

  • ESP32 with Wi-Fi: Hosts a web-based text input page for easy access from phones, tablets, or computers.
  • I2S digital audio: Delivers clean audio output to the amplifier without analog interference.
  • MAX98357A amplifier: Efficiently drives standard 4–8 Ω speakers up to 3W.
  • Adjustable speech parameters: Fine-tune speed, pitch, and clarity to suit your application.
  • Complete kit: Includes ESP32 board, amplifier, speaker, jumper wires, and 3D-printed enclosure.

Specifications Explained

The ESP32 controller provides both processing power and Wi-Fi connectivity, enabling the web interface and speech synthesis. The I2S (Inter-IC Sound) interface ensures digital audio is transmitted cleanly to the amplifier, reducing noise compared to analog methods. The MAX98357A-compatible amplifier module is designed for I2S input and can drive speakers with impedance between 4 and 8 Ω at up to 3W, suitable for small rooms or personal listening. Power is supplied at 5V via the ESP32 board, which also powers the amplifier and speaker. The kit supports ESP32 development boards, making it flexible for users who may want to swap in their own board.

Compatibility and Requirements

This kit is compatible with ESP32 development boards and includes one such board. The amplifier module is MAX98357A compatible, and the speaker impedance should be within 4–8 Ω. A 5V power source is required, typically provided through the ESP32's USB port or 5V pin. No additional software is included; users will need to program the ESP32 with the appropriate text-to-speech firmware, which is not supplied. Basic soldering may be required to connect the amplifier and speaker, depending on the board's headers.

Typical Uses

  • Learning IoT and embedded systems with a practical voice output project.
  • Building assistive devices that read text aloud for visually impaired users.
  • Prototyping voice announcements for smart home or automation systems.
  • Creating interactive exhibits or educational tools that speak.
  • Exploring text-to-speech synthesis on microcontrollers.

What's in the Box

  • 1 x ESP32 Development Board
  • 1 x MAX98357A I2S Audio Amplifier Module
  • 1 x 4–8 Ω Speaker (3W)
  • 10 x Jumper Wires
  • 1 x 3D Printed Enclosure

Quick specs

Controller
ESP32
Audio input/output Port
I2S Digital Interface
Connectivity
Wi-Fi (Web Interface)
Microphone/Speaker
4–8 Ω, up to 3W Supported
Input
Web browser-based text input
Output Type
Digital audio via I2S
See all specifications