
1 / 3 · Click to enlarge
At a glance
Made by Pro-Range, this pro-range diy project kits is a good fit for makers, students and electronics hobbyists. Main specs: item type Educational Kit; model no. / name FPV Tank Kit; voltage rating (v) ESP(3.3V), Driver(9V). Check that your power source supplies ESP(3.3V), Driver(9V) before connecting it.
Key Highlights
- Item Type: Educational Kit
- Model No. / Name: FPV Tank Kit
- Voltage Rating (V): ESP(3.3V), Driver(9V)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Check the size, weight and connector against your model, and keep spare props or parts for the first flights.
Specifications
| Item Type | Educational Kit |
|---|---|
| Model No. / Name | FPV Tank Kit |
| Voltage Rating (V) | ESP(3.3V), Driver(9V) |
| Operating Current (A) | 1 to 2 |
| Color | Black, Orange |
| Material | PLA |
| Length (mm) | 100 |
| Width (mm) | 100 |
| Weight (g) | 190 |
| Shipping Weight | 0.2 kg |
| Shipping Dimensions | 26 × 18 × 8 cm |
Overview
The Pro-Range FPV Tank Kit Using ESP32 , made by Pro-Range, is listed in our pro-range diy project kits range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Educational Kit
- Model No. / Name: FPV Tank Kit
- Voltage Rating (V): ESP(3.3V), Driver(9V) (match this to your power supply; too high a voltage can damage the part)
- Operating Current (A): 1 to 2 (your supply must deliver at least this much current)
- Color: Black, Orange (quoted range is usually line-of-sight; walls and interference shorten it)
- Material: PLA (affects weight, heat handling and how the part wears)
- Length (mm): 100 (measure your mounting space before ordering)
- Width (mm): 100 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The FPV Tank Kit Using ESP32-CAM (Similar to the SMARS Robot) is a DIY Wi-Fi-controlled robot that streams live video and responds to directional commands via a web interface. It uses the ESP32-CAM module for real-time FPV (First Person View) and allows full control of movement and lighting, all from your smartphone or PC—no app needed.
Note:- Full instructions for wiring And codes are included in the user manual.
- The motor and switch do not come pre-soldered; you will need to do the soldering yourself
- Handle the 1S LiPo battery with care. Avoid discharging it below the safe limit of 3V, as it may cause permanent damage
Features:
- ESP32-CAM Module: Wi-Fi-enabled microcontroller with a built-in camera for live video streaming in RGB565 format.
- Web-Based Control Interface: Control movement and view the live stream from any browser—no app required.
- Motor Driver Support: Easily interface L293D or similar motor drivers for precise tank movement.
- Four-Way Movement: Forward, backward, left, and right control through responsive buttons.
- LED Light Control: Toggle the onboard LED light for low-light or night operations.
- Wi-Fi Reconnection Logic: Automatically reconnects to Wi-Fi if the connection drops.
- PSRAM Optimization: Supports higher frame rates and better streaming when PSRAM is available.
- User-Friendly Interface: Clean and mobile-friendly UI for intuitive control.
Package Includes:
1 x ESP32-CAM Module with USB Cable
1 x 3D printed Body FPV Tank
1 x L293D Motor Driver
1 x 3.7V 400mAh Li-po Battery
1 x 9v Battery
2 x Push Switch
2 x N20 Motors
1 x 9v Battery Connector
1 x Female-to-Female Jumper Wires
1 x Male-to-Female Jumper Wires
1 x User Manual (Code + Circuit Diagrams)
Quick specs
- Item Type
- Educational Kit
- Model No. / Name
- FPV Tank Kit
- Voltage Rating (V)
- ESP(3.3V), Driver(9V)
- Operating Current (A)
- 1 to 2
- Color
- Black, Orange
- Material
- PLA



















