Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A protected 11.1V 4400mAh 3S2P lithium-ion pack built from A Grade NMC N18650CH cells with a DC jack female charge port and Amass Nylon-T discharge connector. It gives RC and portable builds a compact, ready-wired power source with a 2C continuous discharge rating.

Key Highlights

  • 11.1V nominal 3S2P configuration with 4400mAh capacity
  • Built-in BMS for pack-level protection
  • 2C continuous discharge for moderate-draw applications
  • DC jack female and 4-pin JST XH charging input
  • Amass Nylon-T discharge connector pre-fitted
  • Compact 72 x 45mm body weighing 318g

Ideal For

  • RC hobbyists needing a compact 11.1V pack
  • FPV ground station and goggle battery builds
  • Prototypers fitting a protected pack into an enclosure
  • Makers building portable electronics with 3S lithium-ion power
  • OEM buyers sourcing a pre-wired 3S2P pack

Buying Tip

Check that your charger supports 3-cell lithium-ion packs and that your device uses an Amass Nylon-T connection before ordering.

Elecvora expert review

Our verdict

A tidy, pre-assembled 3S2P lithium-ion pack that saves builders the work of sourcing cells and wiring a protection board. Its separate charge and discharge connectors and compact 318g body make it a practical choice for moderate-draw RC and portable projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Ready-assembled 3S2P pack with built-in BMS
  • Separate charge and discharge connectors
  • Compact 72 x 45mm footprint at 318g
  • A Grade NMC N18650CH cells

Cons

  • 2C continuous rating limits high-current use
  • Requires a charger suited to 3-cell lithium-ion packs
  • Amass Nylon-T connection may need an adapter for some devices

Best for

RC, FPV ground gear and portable builds needing a protected 11.1V supply

Not ideal for

High-draw applications that exceed the 2C continuous rating

Specifications

Nominal Voltage (V)11.1
Nominal Capacity (mAh)4400 mAh
Continuous Discharge Current (A)2C
BMS (Y/N)Y
Charge ConnectorDC JACK FEMALE/4 Pin JST XH
Discharge PortAmass Nylon T
Max. Discharging Voltage (V)8.7
Length (mm)72
Width (mm)45
Weight (g)318
Model Series3
Shipping Weight0.37 kg
Shipping Dimensions20 × 7 × 5 cm

What's in the box

  • 1 x Pro-Range A Grade NMC N18650CH 11.1V 4400mAh 2C 3S2P Li-Ion Battery Pack with DC Jack Female and Amass Nylon-T

Frequently Asked Questions

What voltage does this battery pack deliver?
It is a 3-cell lithium-ion pack with 11.1V nominal voltage. The given maximum discharging voltage is 8.7V.
Does the pack include protection circuitry?
Yes, a BMS is built into the pack, so no separate protection board is needed.
How do I charge this pack?
Charge through the DC jack female or the 4-pin JST XH connector using a charger suited to 3-cell lithium-ion packs.
What connector is used for the load?
The discharge side uses an Amass Nylon-T connector. Confirm your device or adapter matches it.
How much current can it supply continuously?
The continuous discharge rating is 2C. Check your application's current demand against this figure before use.
What is included with the battery?
The package contains one Pro-Range A Grade NMC N18650CH 11.1V 4400mAh 2C 3S2P Li-Ion Battery Pack with DC Jack Female and Amass Nylon-T.

Overview

The Pro-Range A Grade NMC N18650CH pack is a ready-assembled 3S2P lithium-ion battery delivering 11.1V nominal and 4400mAh. Six 18650-format NMC cells sit inside a compact case measuring 72mm long and 45mm wide, with a total weight of 318g. Because the pack arrives pre-wired, you avoid sourcing loose cells, holders and spot-welding equipment for your build.

A protection circuit is integrated into the pack, and the charge and discharge sides use separate connectors: a DC jack female plus 4-pin JST XH for charging, and an Amass Nylon-T plug for discharge. This separation keeps your charging lead and load lead distinct, which simplifies wiring inside an enclosure.

Key Features

  • 3S2P NMC construction: six 18650 cells arranged for 11.1V nominal output and 4400mAh capacity.
  • Integrated BMS: pack-level protection circuitry is built in.
  • 2C continuous discharge: suited to moderate current draws rather than high-power racing setups.
  • Dual connector layout: DC jack female and 4-pin JST XH for charging, Amass Nylon-T for discharge.
  • Compact footprint: 72 x 45mm and 318g, easy to fit into small bays and handheld enclosures.

Specifications Explained

Voltage and capacity

Nominal voltage is 11.1V, the standard figure for a 3-cell lithium-ion series stack, and capacity is 4400mAh. The 3S2P layout means three cells in series for voltage, doubled in parallel for capacity, so you get both usable voltage and longer runtime than a single string.

Discharge rating

The 2C continuous discharge figure describes how quickly the pack can be drained relative to its capacity. Match your load to this rating and check your own equipment's current demand before connecting.

Connectors and charging

Charging goes through the DC jack female or the 4-pin JST XH connector, while the load connects via the Amass Nylon-T plug. Use a charger suited to a 3-cell lithium-ion pack and confirm the connector type matches your charger before the first charge.

Compatibility and Requirements

This is a 3-cell lithium-ion pack, so it needs a charger configured for that chemistry and cell count. Your device or project must accept an Amass Nylon-T discharge connection, or you will need an adapter. The BMS is built in, so no external protection board is required. Confirm that your application's current draw stays within the 2C continuous rating before use.

Typical Uses

The pack fits RC models, FPV ground equipment, portable instruments, prototyping rigs and custom enclosures where a protected 11.1V supply is needed. Its compact size and moderate weight make it convenient for handheld and wearable projects as well as bench testing.

What's in the Box

One Pro-Range A Grade NMC N18650CH 11.1V 4400mAh 2C 3S2P Li-Ion Battery Pack with DC Jack Female and Amass Nylon-T.

Quick specs

Nominal Voltage (V)
11.1
Nominal Capacity (mAh)
4400 mAh
Continuous Discharge Current (A)
2C
BMS (Y/N)
Y
Charge Connector
DC JACK FEMALE/4 Pin JST XH
Discharge Port
Amass Nylon T
See all specifications