
1 / 3 · Click to enlarge
AI Summary
This 11.1V 2800mAh 3S Li-ion pack uses matched Molicel P28A cells for stable drone avionics power. Its XT30 and JST-RCY-BEC connectors make it easy to integrate into compact builds.
Key Highlights
- 11.1V nominal 3S1P Li-ion pack with 2800mAh capacity
- 13C continuous discharge for steady avionics power
- Impedance-matched Molicel P28A cells for consistent output
- Compact 70 x 55mm footprint weighs approximately 170g
- Amass XT30 discharge port and JST-RCY-BEC charge connector
- Reliable performance in temperatures below -20°C
Ideal For
- Drone builders needing reliable avionics power
- FPV pilots looking for compact 3S Li-ion packs
- RC hobbyists upgrading to Li-ion chemistry
- Operators flying in cold environments
- Makers building custom battery-powered projects
Buying Tip
Verify your charger supports Li-ion chemistry and has a 4-pin JST XH balance port before charging this pack.
Elecvora expert review
Our verdict
The Pro-Range INR P28A offers a solid balance of capacity, weight, and reliability for drone avionics. Its matched Molicel cells and compact form factor make it a dependable choice for pilots prioritizing flight time and cold-weather performance.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Impedance-matched Molicel P28A cells for consistent output
- Lightweight and compact design at approximately 170g
- Higher energy density than typical Li-Po packs
- Reliable in temperatures below -20°C
- No puffing or bulging issues
Cons
- No built-in BMS, requiring external monitoring
- Requires a Li-ion compatible balance charger
- XT30 connector may not suit all setups without an adapter
Best for
Drone avionics and RC electronics needing a compact 3S Li-ion power source
Not ideal for
High-current applications like large multirotors or aggressive 3D flying
Specifications
| Nominal Voltage (V) | 11.1 |
|---|---|
| Nominal Capacity (mAh) | 2800 mAh |
| Continuous Discharge Current (A) | 13C |
| BMS (Y/N) | N |
| Charge Connector | 4 Pin JST XH/2 Pin JST RCY BEC Female |
| Discharge Port | Amass XT30 |
| Length (mm) | 70 |
| Width (mm) | 55 |
| Weight (g) | ~170 |
| Shipping Weight | 0.2 kg |
| Shipping Dimensions | 13 × 11 × 6 cm |
What's in the box
- 1 x Pro-Range INR P28A 11.1V 2800mAh 13C 3S1P in-line Li-ion Drone Avionics Battery Pack with XT-30 & JST-RCY-BEC
Frequently Asked Questions
What is the recommended failsafe voltage for this pack?
Can I charge this battery with a standard Li-Po charger?
Does this pack include a battery management system (BMS)?
What connectors does the pack have?
Is this battery suitable for cold weather?
What is included in the package?
Overview
The Pro-Range INR P28A is a 3-cell 11.1V 2800mAh Li-ion battery pack designed for drone avionics and RC electronics. It uses an in-line 3S1P configuration to keep the pack compact and lightweight, making it suitable for builds where space and weight are critical. The pack is assembled with high-performance Molicel P28A cells that are impedance-matched for balanced discharge and maximum performance.
Key Features
- High-performance cells: Built with Molicel P28A cells known for reliability and consistent output.
- Impedance matched: Each pack uses cells matched for internal resistance to ensure even wear and stable power delivery.
- Compact and light: Measures 70 x 55mm and weighs approximately 170g, offering a high energy-to-weight ratio.
- Longer flight time: Higher WH/kg than typical Li-Po packs can translate to extended runtime for avionics and payloads.
- Cold-weather capable: Performs well at temperatures below -20°C, suitable for challenging environments.
- No puffing: Li-ion chemistry avoids the cell bulging common in Li-Po packs under stress.
Specifications Explained
Nominal voltage: 11.1V (3S) means the pack delivers an average of 11.1V, with a full charge of 12.6V. For drone failsafe settings, a trigger at 9.6V (20% reserve) and a minimum flying voltage of 8.7V are recommended.
Capacity: 2800mAh provides ample energy for avionics, cameras, and other low-to-moderate current draws. The 13C continuous discharge rating indicates the pack can supply up to 13 times its capacity in amps, though typical avionics loads are far lower.
Connectors: The XT30 discharge port is a compact, reliable connector for main power. The charge connector combines a 4-pin JST XH balance lead with a 2-pin JST RCY BEC female plug, allowing balance charging and easy integration with BEC circuits.
No BMS: This pack does not include a battery management system, so an external balance charger and proper voltage monitoring are required.
Compatibility and Requirements
This pack is intended for drone avionics and RC applications that accept a 3S Li-ion input. Ensure your system can handle the voltage range of 8.7V to 12.6V. The XT30 discharge port requires a matching XT30 plug on your device or harness. Charging requires a Li-ion compatible balance charger with a 4-pin JST XH connection and appropriate settings for 3S packs.
Typical Uses
Suitable for powering drone avionics, video transmitters, receivers, and other onboard electronics. It can also be used in RC projects where a compact 3S Li-ion pack is preferred over Li-Po for its energy density and lack of puffing.
What's in the Box
1 x Pro-Range INR P28A 11.1V 2800mAh 13C 3S1P in-line Li-ion Drone Avionics Battery Pack with XT-30 & JST-RCY-BEC.

Quick specs
- Nominal Voltage (V)
- 11.1
- Nominal Capacity (mAh)
- 2800 mAh
- Continuous Discharge Current (A)
- 13C
- BMS (Y/N)
- N
- Charge Connector
- 4 Pin JST XH/2 Pin JST RCY BEC Female
- Discharge Port
- Amass XT30


















