Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Pro-Range INR P28A 14.8V 2800mAh 13C 4S1P Li-ion battery pack with XT-60, built for 4 and 5 inch FPV drones. Offers high energy density and stable performance without puffing.

Key Highlights

  • 14.8V nominal voltage with 2800mAh capacity for 4S FPV setups
  • 13C continuous discharge for stable power delivery
  • Impedance-matched cells for consistent performance
  • Compact and lightweight at approximately 210g
  • Amass XT60 discharge and 5-pin JST XH charge connectors
  • Longer flight time and higher Wh/kg than comparable Li-Po packs

Ideal For

  • FPV pilots flying 4-inch and 5-inch drones
  • Long-range FPV enthusiasts seeking higher energy density
  • Cold-weather flyers needing reliable performance below -20°C
  • RC hobbyists looking for a lightweight 4S Li-ion pack
  • Builders who prefer Li-ion over Li-Po for safety and longevity

Buying Tip

Check that your charger supports Li-ion chemistry and has a 5-pin JST XH balance port before purchasing.

Elecvora expert review

Our verdict

The Pro-Range INR P28A offers a solid balance of capacity, weight, and discharge capability for 4-inch and 5-inch FPV drones. Its Li-ion chemistry provides longer flight times and better cold-weather performance than typical Li-Po packs, though it requires careful voltage monitoring due to the lack of a BMS.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight and compact for its capacity
  • Higher energy density than comparable Li-Po packs
  • No puffing or bulging
  • Good cold-weather performance
  • Impedance-matched cells for consistent output

Cons

  • No BMS, so voltage must be monitored manually
  • Requires a Li-ion compatible charger with JST XH balance port
  • Lower continuous discharge rate than high-C Li-Po packs

Best for

FPV pilots seeking longer flight times and durability in 4-inch and 5-inch drones

Not ideal for

High-current racing setups that demand very high discharge rates

Specifications

Nominal Voltage (V)14.8
Nominal Capacity (mAh)2800 mAh
Continuous Discharge Current (A)13C
BMS (Y/N)N
Charge Connector5 Pin JST XH
Discharge PortAmass XT60
Length (mm)70
Width (mm)40
Weight (g)~210
Shipping Weight0.275 kg
Shipping Dimensions13 × 11 × 6 cm

What's in the box

  • 1 x Pro-Range INR P28A 14.8V 2800mAh 13C 4S1P Li-ion Battery Pack with XT-60

Frequently Asked Questions

What is the recommended failsafe voltage for this battery?
Set your failsafe to trigger at 12.8V, which leaves a 20% reserve. Do not fly below 11.6V to prevent cell damage.
Can I use a standard Li-Po charger to charge this pack?
Only if your charger has a dedicated Li-ion mode and a 5-pin JST XH balance port. Li-Po-only chargers may not charge to the correct voltage.
Does this battery have a built-in BMS?
No, this pack does not include a battery management system. You must monitor voltage during use and avoid over-discharge.
What is the maximum continuous discharge current?
The pack is rated for 13C continuous discharge, which equates to approximately 36.4A for the 2800mAh capacity.
Is this battery suitable for 5-inch FPV drones?
Yes, it is designed for 4-inch and 5-inch FPV drones, provided your setup can accommodate a 4S Li-ion pack with an XT60 connector.
How should I store the battery when not in use?
Store it at around 50% charge in a cool, dry place. Avoid leaving it fully charged or fully discharged for long periods.

Overview

The Pro-Range INR P28A is a 4S1P lithium-ion battery pack engineered for 4-inch and 5-inch FPV drones. It combines a 14.8V nominal voltage with a 2800mAh capacity, delivering reliable energy for demanding flight sessions. The pack uses high-performance cells that are impedance-matched during assembly to ensure balanced discharge and maximum performance. With a 13C continuous discharge rating, it can handle the current draw of typical FPV powertrains. The battery is compact and weighs approximately 210 grams, making it a suitable choice for builds where weight and flight time are critical. It features an Amass XT60 discharge connector and a 5-pin JST XH charge connector. Unlike Li-Po packs, this Li-ion battery does not puff or bulge, and it maintains superior performance even at temperatures below -20°C.

Key Features

  • High-performance cells: Assembled with Molicel P28A cells made in Taiwan for dependable output.
  • Impedance matching: Each pack is built with cells matched for impedance to maximize performance and longevity.
  • Compact and light: One of the most compact and lightweight options for its capacity, helping extend flight times.
  • Higher energy density: Provides a higher Wh/kg ratio than typical Li-Po battery packs.
  • Cold-weather performance: Operates well at temperatures below -20°C.
  • No puffing: Li-ion chemistry avoids the swelling common in Li-Po packs.

Specifications Explained

Nominal Voltage (14.8V): This 4-cell pack delivers 14.8V nominal, with a full charge of 16.8V and a recommended minimum flying voltage of 11.6V. For failsafe settings, trigger at 12.8V to preserve a 20% reserve.

Capacity (2800mAh): The 2800mAh capacity provides ample energy for extended FPV flights, depending on the drone's power draw.

Continuous Discharge (13C): The 13C rating means the pack can supply a continuous current of 36.4A (13 times 2.8A), suitable for many 4-inch and 5-inch FPV setups.

Connectors: The Amass XT60 discharge port is a standard connector for many FPV drones. The 5-pin JST XH charge connector requires a compatible balance charger.

Dimensions and Weight: At 70mm x 40mm and approximately 210g, the pack fits many 4-inch and 5-inch frames without adding excessive weight.

Compatibility and Requirements

This battery is intended for 4-inch and 5-inch FPV drones that accept a 4S Li-ion pack with an XT60 connector. Ensure your drone's power system can handle the 14.8V nominal voltage and the current demands of your setup. A compatible Li-ion charger with a 5-pin JST XH balance connector is required for charging. The pack does not include a BMS, so you must monitor voltage during use and avoid discharging below 11.6V.

Typical Uses

Ideal for FPV freestyle and cruising with 4-inch and 5-inch quads, long-range flights where efficiency matters, and cold-weather flying. Also suitable for other RC applications that can accommodate a 4S Li-ion pack with XT60 connector.

What's in the Box

1 x Pro-Range INR P28A 14.8V 2800mAh 13C 4S1P Li-ion Battery Pack with XT-60.

Quick specs

Nominal Voltage (V)
14.8
Nominal Capacity (mAh)
2800 mAh
Continuous Discharge Current (A)
13C
BMS (Y/N)
N
Charge Connector
5 Pin JST XH
Discharge Port
Amass XT60
See all specifications