Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Pro-Range INR P28A 14.8V 5600mAh 13C 4S2P Li-ion battery pack with XT-60 connector, designed for 4 and 5 inch FPV drones. It offers high energy density and reliable performance in cold conditions.

Key Highlights

  • 14.8V nominal voltage with 5600mAh capacity
  • 13C continuous discharge for FPV drone power
  • Uses high-performance Molicel P28A cells
  • Compact and lightweight at approximately 405g
  • Amass XT60 discharge port and 5-pin JST XH charge connector
  • Operates reliably at temperatures below -20°C

Ideal For

  • FPV pilots flying 4-inch drones
  • FPV pilots flying 5-inch drones
  • Long-range FPV enthusiasts
  • Cold-weather flyers
  • Drone builders seeking Li-ion packs

Buying Tip

Verify that your drone's power system and battery compartment can accommodate a 4S Li-ion pack of these dimensions and that you have a compatible Li-ion charger with a 5-pin JST XH balance connector.

Elecvora expert review

Our verdict

The Pro-Range INR P28A pack offers a compelling blend of capacity, cold-weather performance, and durability for FPV pilots. Its Li-ion chemistry provides longer flight times and higher energy density than many Li-Po alternatives, though it requires careful voltage management.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High capacity for extended flight times
  • Reliable performance in cold temperatures
  • Compact and lightweight design
  • No puffing or bulging issues

Cons

  • Requires a Li-ion compatible charger with JST XH balance connector
  • Lower continuous discharge rate compared to high-C Li-Po packs

Best for

FPV pilots flying 4 or 5 inch drones who prioritize flight time and cold-weather reliability.

Not ideal for

Pilots needing very high discharge rates for extreme acro maneuvers or those without a compatible charger.

Specifications

Nominal Voltage (V)14.8
Nominal Capacity (mAh)5600 mAh
Continuous Discharge Current (A)13C
BMS (Y/N)N
Charge Connector5 Pin JST XH
Discharge PortAmass XT60
Length (mm)135
Width (mm)40
Weight (g)~405
Model Series4
Shipping Weight0.47 kg
Shipping Dimensions16 × 10 × 6 cm

What's in the box

  • 1 x Pro-Range INR P28A 14.8V 5600mAh 13C 4S2P Li-ion Battery Pack with XT-60

Frequently Asked Questions

What is the nominal voltage of this battery pack?
The nominal voltage is 14.8V, with a full charge of 16.8V.
What connectors does this battery have?
It has an Amass XT60 discharge connector and a 5-pin JST XH charge connector.
Can I use this battery in cold weather?
Yes, the pack is designed for superior performance at temperatures below -20°C.
What is included in the package?
The package includes one Pro-Range INR P28A 14.8V 5600mAh 13C 4S2P Li-ion battery pack with XT-60.
What is the recommended failsafe voltage?
Set your battery failsafe trigger to 12.8V to maintain a 20% reserve, and avoid flying below 11.6V.
How should I care for this battery?
Charge only with a compatible Li-ion charger, avoid over-discharge below 11.6V, and store at room temperature.

Overview

The Pro-Range INR P28A 14.8V 5600mAh 13C 4S2P Li-ion battery pack is engineered for 4-inch and 5-inch FPV drones. It combines high-performance Molicel P28A cells with impedance matching to deliver consistent power and longer flight times. This compact pack weighs approximately 405g and measures 135mm in length and 40mm in width, making it a practical choice for builds where space and weight are critical.

Key Features

  • High-performance cells: Assembled with Molicel P28A cells for reliable output.
  • Impedance matched: Each pack is built with cells matched for impedance to maximize performance.
  • Compact and light: Most compact and lightweight design for its capacity.
  • Longer flight time: Higher energy density than comparable Li-Po packs.
  • Cold weather performance: Superior operation at temperatures below -20°C.
  • No puffing: Cells resist bulging, ensuring durability.

Specifications Explained

Nominal Voltage (14.8V): This 4-cell Li-ion pack provides a stable voltage for drone power systems. For safe operation, set your battery failsafe trigger to 12.8V (20% reserve) and avoid flying below 11.6V.

Capacity (5600mAh): The high capacity allows for extended flight times compared to smaller packs.

Continuous Discharge (13C): The 13C rating indicates the pack can deliver high current for demanding FPV maneuvers.

Connectors: The Amass XT60 discharge port is compatible with common drone power leads, while the 5-pin JST XH charge connector is used for balance charging.

Compatibility and Requirements

This battery pack is designed for 4-inch and 5-inch FPV drones that accept a 4S Li-ion pack with an XT60 connector. Ensure your drone's power system is rated for 14.8V nominal (16.8V full charge) and that the battery compartment can accommodate the pack's dimensions (135mm x 40mm). A suitable Li-ion charger with a 5-pin JST XH balance connector is required for charging.

Typical Uses

Ideal for FPV freestyle, cinematic flying, and long-range cruising with 4-inch and 5-inch drones. The pack's cold-weather performance also makes it suitable for winter flying sessions.

What's in the Box

1 x Pro-Range INR P28A 14.8V 5600mAh 13C 4S2P Li-ion Battery Pack with XT-60

Quick specs

Nominal Voltage (V)
14.8
Nominal Capacity (mAh)
5600 mAh
Continuous Discharge Current (A)
13C
BMS (Y/N)
N
Charge Connector
5 Pin JST XH
Discharge Port
Amass XT60
See all specifications