
1 / 3 · Click to enlarge
AI Summary
A 14.8V 5600mAh 4S2P Li-ion pack for 5-inch and 7-inch FPV drones, rated 13C with up to 61.6A discharge through an XT60 connector. It pairs long capacity with balanced parallel-cell output for extended flights.
Key Highlights
- 5600mAh nominal capacity at 14.8V for extended flight duration
- 13C discharge rate with maximum current up to 61.6A
- 4S2P INR P28A cell layout for balanced, stable output
- XT60 discharge connector with JST-RCY-BEC charge connector
- 5-pin JST-XH balance connector for cell monitoring
- Fits 5-inch and 7-inch FPV quadcopter builds
Ideal For
- FPV freestyle pilots flying 5-inch quads
- Long-range and cruising pilots on 7-inch builds
- Cinematic FPV operators needing extended flight time
- Hobbyists upgrading to a 4S2 Li-ion pack
- Pilots with XT60 power leads and Li-ion capable chargers
Buying Tip
Check that your frame has room for the 74 x 66 x 36mm pack and that your build can carry 428g before buying, since weight and fit affect handling more than capacity alone.
Elecvora expert review
Our verdict
A sensible endurance-focused Li-ion option for 5-inch and 7-inch FPV builds, with useful current headroom and standard connectors. It rewards pilots who plan around its 428g weight and 4S requirements.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 5600mAh capacity supports longer flights
- 13C rating with up to 61.6A maximum discharge
- 4S2P layout for balanced current sharing
- XT60, JST-RCY-BEC and 5-pin JST-XH connectors cover discharge, charge and balance
Cons
- At 428g it is heavier than many small FPV packs
- Requires a Li-ion capable charger with matching connectors
- Only suited to 4S-compatible 5-inch and 7-inch builds
Best for
Pilots prioritising flight time on 5-inch and 7-inch FPV quads
Not ideal for
Weight-critical racing builds or non-4S power systems
Specifications
| Shipping Weight | 0.476 kg |
|---|---|
| Shipping Dimensions | 11 × 8 × 7 cm |
What's in the box
- 1 x Pro-Range INR P28A 14.8V 5600mAh 13C 4S2P Li-ion Battery Pack with XT60
Frequently Asked Questions
What drone sizes is this battery intended for?
What connectors does the pack use?
How much current can it deliver?
What is the voltage of this pack?
What is included with the battery?
How should I look after the pack?
Overview
The Pro-Range INR P28A is a lithium-ion battery pack aimed at FPV pilots flying 5-inch and 7-inch quadcopters who want longer flights than a typical small-capacity pack allows. It uses INR P28A cells in a 4S2P arrangement, giving a nominal 14.8V and 5600mAh capacity. The parallel grouping means current is shared across cell pairs, which helps the pack deliver steady voltage under load.
With a 13C discharge rating, the pack supports a maximum discharge current of 61.6A. That is enough headroom for punchy throttle bursts and aggressive manoeuvres on suitable builds. The discharge lead terminates in an XT60 connector, a widely used format on FPV power systems.
Key Features
- High capacity: 5600mAh nominal capacity for longer flight windows.
- Strong current delivery: 13C rating with up to 61.6A maximum discharge.
- Balanced configuration: 4S2P layout spreads load across parallel cell groups.
- Practical connectors: XT60 discharge, JST-RCY-BEC charge and 5-pin JST-XH balance.
- Compact footprint: 74 x 66 x 36mm and 428g for easier mounting on 5-inch and 7-inch frames.
Specifications Explained
Voltage and cell count
14.8V nominal indicates a 4-cell series stack, with a full charge of 16.8V. Make sure your drone's power system, ESCs and electronics are rated for a 4S lithium-ion input before connecting.
Capacity and configuration
5600mAh is the nominal capacity, and the 4S2P layout means two parallel strings of four cells in series. This design supports current sharing and helps keep output consistent during demanding throttle use.
Discharge and charge ratings
The 13C discharge rate corresponds to a maximum discharge current of 61.6A, and the maximum charge current is 30.8A. In practice, charge at a rate appropriate to your charger and the pack's condition rather than assuming the maximum is routine.
Connectors
The XT60 handles discharge to your drone. Charging uses the JST-RCY-BEC connector, and the 5-pin JST-XH balance connector lets a compatible charger monitor individual cell groups.
Compatibility and Requirements
This pack is intended for 5-inch and 7-inch FPV drone quadcopters. Your build needs a 4S-compatible power system and an XT60 mating connector on the power lead. A charger that supports lithium-ion packs, the JST-RCY-BEC charge connector and 5-pin JST-XH balancing is required. Confirm frame space for the 74 x 66 x 36mm pack and account for its 428g weight when balancing the build.
Typical Uses
Suited to freestyle and cruising flights on 5-inch and 7-inch quads, longer cinematic runs where endurance matters, and general FPV practice. The capacity and current headroom also make it a reasonable choice for pilots who prefer stable voltage over the lightest possible pack.
What's in the Box
- 1 x Pro-Range INR P28A 14.8V 5600mAh 13C 4S2P Li-ion Battery Pack with XT60


















