Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Pro-Range INR P28A 6S1P Li-ion battery pack delivers 22.2V 2800mAh with 13C continuous discharge and XT60 connector. Its high energy density and cold-weather performance make it ideal for E-VTOL drones.

Key Highlights

  • 6S1P lithium-ion pack with 22.2V nominal and 2800mAh capacity
  • 13C continuous discharge for stable power under load
  • Amass XT60 discharge connector and 7-pin JST XH charge port
  • Approximately 350g weight and compact 115 x 70mm footprint
  • Impedance-matched cells for consistent pack performance
  • Reliable operation below -20°C and no cell puffing

Ideal For

  • E-VTOL drone builders seeking a lightweight 6S power source
  • Long-endurance multirotor operators
  • RC hobbyists needing a compact 22.2V Li-ion pack
  • Drone developers testing cold-weather performance
  • FPV pilots building custom long-range aircraft

Buying Tip

Confirm your aircraft’s maximum current draw stays below 36A continuous and that your charger supports 6S lithium-ion with a 7-pin JST XH balance port.

Elecvora expert review

Our verdict

The Pro-Range INR P28A offers a practical blend of low weight and high energy for E-VTOL drones, with the added benefit of cold-weather reliability. It is a solid choice for builders who understand lithium-ion care and need a compact 6S pack.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High energy density for longer flight times
  • Stable performance below -20°C
  • Impedance-matched cells for consistent output
  • Resists puffing common in Li-Po packs
  • Lightweight at approximately 350g

Cons

  • No built-in BMS, so external balancing is required
  • Continuous discharge limited to 13C (about 36A)
  • Requires a charger with 7-pin JST XH support

Best for

E-VTOL and endurance drone builders who prioritize flight time and cold-weather operation.

Not ideal for

High-current racing drones or users who prefer plug-and-play Li-Po packs with integrated BMS.

Specifications

Nominal Voltage (V)22.2
Nominal Capacity (mAh)2800 mAh
Continuous Discharge Current (A)13C
BMS (Y/N)N
Charge Connector7 Pin JST XH
Discharge PortAmass XT60
Length (mm)115
Width (mm)70
Weight (g)~350
Model Series6
Shipping Weight0.37 kg
Shipping Dimensions13 × 11 × 6 cm

What's in the box

  • 1 x Pro-Range INR P28A 22.2V 2800mAh 13C 6S1P E-VTOL Drone in-line Li-ion Battery Pack with XT-60

Frequently Asked Questions

What is the maximum continuous discharge current for this pack?
The pack is rated for 13C continuous discharge, which equates to approximately 36.4A given its 2800mAh capacity.
Can I use this battery with my existing Li-Po charger?
Only if your charger supports lithium-ion chemistry and has a 7-pin JST XH balance port. Do not use a Li-Po-only charger without confirming compatibility.
What voltage should I set for battery failsafe?
For drone applications, set the failsafe trigger to 12.8V (about 20% reserve) and land before the pack reaches 11.6V.
Does this pack include a battery management system?
No, this pack does not have an integrated BMS. You must use an external balance charger and monitor cell voltages.
What connectors does the battery have?
It features an Amass XT60 connector for discharge and a 7-pin JST XH connector for charging and balancing.
How should I store the battery when not in use?
Store the pack at around 50% state of charge in a cool, dry place, and avoid leaving it fully charged or fully discharged for long periods.

Overview

The Pro-Range INR P28A is a 6S1P lithium-ion battery pack designed for E-VTOL drones and other electric aircraft that demand a balance of low weight and high energy capacity. It uses six 2800mAh cells in series to provide a nominal 22.2V, with a continuous discharge rating of 13C. The pack is assembled with impedance-matched cells to help maintain consistent output across the series string. At approximately 350g and 115 x 70mm, it fits into airframes where space is limited. The main discharge output is an Amass XT60 connector, while charging and balancing are handled through a 7-pin JST XH connector.

Key Features

  • High energy density: Lithium-ion chemistry offers more watt-hours per kilogram than typical Li-Po packs of similar capacity.
  • Stable under load: 13C continuous discharge supports the current demands of multirotor and VTOL platforms.
  • Cold-weather capable: Performs in temperatures below -20°C without the sudden voltage sag common to some Li-Po cells.
  • No puffing: Lithium-ion cells resist the bulging that can occur in Li-Po packs after repeated use.
  • Compact form factor: The 115 x 70mm footprint and ~350g weight help keep your aircraft light.

Specifications Explained

Voltage and capacity: The 22.2V nominal (25.2V fully charged) and 2800mAh capacity give a total energy of about 62Wh. This is enough for endurance-oriented drone missions where every gram counts.

Discharge rate: The 13C rating means the pack can deliver a continuous current of approximately 36.4A (13 times 2.8A). Always verify that your propulsion system’s current draw stays within this limit.

Connectors: The XT60 is a widely used, robust connector for main power. The 7-pin JST XH charge connector allows individual cell monitoring and balancing with a compatible charger.

No BMS: This pack does not include an integrated battery management system, so you must use a suitable balance charger and observe correct voltage limits.

Compatibility and Requirements

This pack is intended for systems that accept a 6S lithium-ion voltage range. For safe operation in drone applications, set your flight controller’s battery failsafe to trigger at 12.8V (about 20% reserve) and land before the pack reaches 11.6V. You will need a charger that supports 6S lithium-ion chemistry and a 7-pin JST XH balance lead. The XT60 discharge connector requires a matching XT60 plug on your power lead.

Typical Uses

This battery is well suited to E-VTOL aircraft, long-endurance multirotors, and other electric drones where flight time is a priority. It can also be used in RC projects that need a lightweight 6S source and can accommodate the XT60 connector.

What's in the Box

1 x Pro-Range INR P28A 22.2V 2800mAh 13C 6S1P E-VTOL Drone in-line Li-ion Battery Pack with XT-60.

Pro-Range Aaditya Battery

Quick specs

Nominal Voltage (V)
22.2
Nominal Capacity (mAh)
2800 mAh
Continuous Discharge Current (A)
13C
BMS (Y/N)
N
Charge Connector
7 Pin JST XH
Discharge Port
Amass XT60
See all specifications