Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 1S2P in-line Li-ion drone avionics pack using INR P28A cells, rated 3.7V nominal, 5600mAh and 13C continuous discharge. It gives you a plug-in JST-RCY-BEC discharge port plus a 16 AWG open-wire charge lead, with no BMS so your electronics manage the 4.2V/2.9V limits.

Key Highlights

  • 1S2P in-line Li-ion pack with 3.7V nominal and 5600mAh capacity
  • 13C continuous discharge rating for demanding avionics loads
  • JST-RCY-BEC female discharge port for direct plug-in connection
  • 16 AWG open-wire charge lead with 2-pin JST XH style termination
  • No BMS, so charge and cutoff limits are handled externally
  • Compact 65 mm body length for tight airframe installations

Ideal For

  • Drone avionics and onboard electronics builders
  • Pilots wiring a 1S Li-ion source into an airframe harness
  • Builders who prefer a plug-in JST-RCY-BEC discharge connection
  • Projects needing a compact 65 mm high-capacity 1S pack
  • Users comfortable managing charge and cutoff limits externally

Buying Tip

Check that your aircraft harness matches the JST-RCY-BEC female discharge port and that your charger can be set to a 4.2V maximum before ordering, since this pack has no BMS.

Elecvora expert review

Our verdict

A focused 1S2P Li-ion pack for avionics builds that want a plug-in discharge port and a compact body. It rewards buyers who already manage charge and cutoff limits externally, since there is no BMS.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 5600mAh capacity in a 1S2P in-line layout
  • 13C continuous discharge rating
  • JST-RCY-BEC female discharge port simplifies wiring
  • Compact 65 mm length
  • Open-wire 16 AWG charge lead allows custom termination

Cons

  • No BMS, so protection must be external
  • Open-wire charge lead requires you to fit a connector
  • Heavier pack at about 3450 g

Best for

Drone avionics and onboard electronics running from a single Li-ion cell

Not ideal for

Users who want a plug-and-play pack with built-in protection

Specifications

Nominal Voltage (V)3.7
Nominal Capacity (mAh)5600 mAh
Continuous Discharge Current (A)13C
BMS (Y/N)N
Charge Connector2 Pin JST XH/Open wire 16 AWG, 17937
Discharge Port2 Pin JST RCY BEC Female, JST-RCY-BEC Female
Max. Charging Voltage (V)4.2
Max. Discharging Voltage (V)2.9
Charging Current7C
Length (mm)65
Weight (g)~3450
Model Series1
Shipping Weight3.5 kg
Shipping Dimensions35 × 30 × 20 cm

What's in the box

  • 1 x Pro-Range INR P28A 3.7V 5600mAh 13C 1S2P in-line Li-ion Drone Avionics Battery Pack with JST-RCY-BEC and open wire

Frequently Asked Questions

What voltage should I treat as the charge limit?
The maximum charging voltage is 4.2V. Set your charger for Li-ion and do not exceed that figure.
How low can I discharge the pack?
The maximum discharging voltage is 2.9V. Set your aircraft cutoff so the pack is not taken below that level.
Does this pack have a BMS?
No. The pack has no integrated BMS, so charge protection and low-voltage cutoff must be handled by your charger and aircraft electronics.
What connectors does it use?
The discharge side is a 2-pin JST-RCY-BEC female port. The charge side is a 2-pin JST XH/open-wire lead in 16 AWG.
What is included with the pack?
One Pro-Range INR P28A 3.7V 5600mAh 13C 1S2P in-line Li-ion Drone Avionics Battery Pack with JST-RCY-BEC and open wire.
How should I store and handle it?
Keep the pack within its voltage limits, avoid charging above 4.2V, and inspect the leads and cells regularly for damage.

Overview

The Pro-Range INR P28A is a 1S2P in-line Li-ion battery pack intended for drone avionics. Two cells are arranged in parallel to reach a 5600mAh nominal capacity at 3.7V nominal, and the pack is rated for 13C continuous discharge. It is supplied with a 2-pin JST-RCY-BEC female discharge port and a separate 2-pin JST XH/open-wire charge lead in 16 AWG, so the pack can be wired into an airframe rather than plugged into a standard hobby balance charger.

Because there is no BMS on board, voltage protection is the responsibility of the aircraft's electronics or the charger you use. The stated limits are 4.2V maximum charging voltage and 2.9V maximum discharging voltage, with a 7C charging current rating.

Key Features

  • 1S2P in-line configuration with 5600mAh nominal capacity
  • 13C continuous discharge rating
  • JST-RCY-BEC female discharge port
  • 2-pin JST XH/open-wire 16 AWG charge lead
  • Compact 65 mm length, approximately 3450 g
  • No integrated BMS, keeping the pack simple and wiring flexible

Specifications Explained

Voltage and capacity: 3.7V nominal with a 4.2V charge ceiling and a 2.9V discharge floor. Plan your failsafe and minimum flight voltage around these figures, and never charge above 4.2V.

Discharge rating: The 13C continuous rating describes how much current the pack is built to deliver continuously relative to its capacity. Confirm your load stays within that rating before flight.

Charging: The pack is rated for 7C charging current, but the actual current you use should match your charger and wiring. The 16 AWG open-wire lead is the charge path.

Connectors: The discharge side is a 2-pin JST-RCY-BEC female port, so your aircraft harness needs the matching plug. The charge lead is left open for you to terminate as required.

Compatibility and Requirements

This pack is a 1S Li-ion source, not a multi-cell balance pack. It has no BMS, so your charger must be set for Li-ion with a 4.2V maximum and your aircraft must enforce a low-voltage cutoff at or above 2.9V. You will need to terminate or adapt the open-wire charge lead and match the JST-RCY-BEC female discharge port to your harness.

Typical Uses

Suited to drone avionics and onboard electronics that run from a single Li-ion cell, and to builds where a compact 65 mm pack with a plug-in discharge port simplifies installation.

What's in the Box

  • 1 x Pro-Range INR P28A 3.7V 5600mAh 13C 1S2P in-line Li-ion Drone Avionics Battery Pack with JST-RCY-BEC and open wire

Quick specs

Nominal Voltage (V)
3.7
Nominal Capacity (mAh)
5600 mAh
Continuous Discharge Current (A)
13C
BMS (Y/N)
N
Charge Connector
2 Pin JST XH/Open wire 16 AWG, 17937
Discharge Port
2 Pin JST RCY BEC Female, JST-RCY-BEC Female
See all specifications