
1 / 3 · Click to enlarge
AI Summary
A compact 11.1V 12600mAh 3S3P lithium-ion drone pack with XT-60 discharge and 4-pin JST XH charge connectors. Impedance-matched cells and roughly 720 g weight make it a practical choice for longer flight time without a bulky pack.
Key Highlights
- 11.1V nominal, 12600mAh capacity in a 3S3P configuration
- 11C continuous discharge rating with XT-60 main connector
- 4-pin JST XH charge connector, 12.6V maximum charging voltage
- Impedance-matched cells assembled for consistent pack performance
- Compact 75mm length and approximately 720g weight
- No internal BMS, so voltage failsafes must be set in the flight controller
Ideal For
- Drone builders running XT-60 avionics power
- Long-endurance multirotor projects
- Cold-weather flight operations
- Pilots wanting lithium-ion energy density over lithium-polymer
- Custom airframes with tight battery bays
Buying Tip
Set your flight controller failsafe to 9.6V and your minimum flight voltage to 8.7V before flying, since this pack has no internal BMS to protect itself.
Elecvora expert review
Our verdict
A sensible lithium-ion pack for avionics and endurance builds that already use XT-60 wiring. The lack of a BMS is the main trade-off, so it rewards pilots who configure voltage protection properly.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Useful 12600mAh capacity at roughly 720g
- Compact 75mm length eases tight installs
- Impedance-matched cells for consistent output
- Stated performance below -20 degrees Celsius
- No cell puffing or bulging
Cons
- No integrated BMS, so external voltage protection is required
- Charge path uses a 4-pin JST XH rather than a common balance plug
- Discharge current limited by the 11C continuous rating
Best for
Drone avionics and long-endurance airframes with XT-60 power wiring
Not ideal for
Pilots who want a self-protecting pack with built-in BMS
Specifications
| Nominal Voltage (V) | 11.1 |
|---|---|
| Nominal Capacity (mAh) | 12600 mAh |
| Continuous Discharge Current (A) | 11C |
| BMS (Y/N) | N |
| Charge Connector | 4 Pin JST XH |
| Max. Charging Voltage (V) | 12.6 |
| Max. Discharging Voltage (V) | 8.7 |
| Charging Current | 5C |
| Length (mm) | 75 |
| Weight (g) | ~720 |
| Model Series | 3 |
| Shipping Weight | 0.77 kg |
| Shipping Dimensions | 15 × 13 × 10 cm |
What's in the box
- 1 x Pro-Range INR P42A 11.1V 12600mAh 11C 3S3P Compact Li-ion Drone Avionics Battery Pack with XT-60
Frequently Asked Questions
What voltage should I set my failsafe to?
Does this pack have a built-in BMS?
How do I charge this battery?
What connectors does it use?
How much does the pack weigh?
What is included in the box?
Overview
The Pro-Range INR P42A 11.1V 12600mAh 11C 3S3P battery pack is a compact lithium-ion power source intended for drone avionics and comparable electronics. It uses a three-cell series, three-cell parallel layout to reach 11.1V nominal and 12600mAh, while keeping the physical package short at 75mm and light at roughly 720g. The main discharge lead terminates in an XT-60 connector, and charging is handled through a 4-pin JST XH connector.
This is a bare pack without an integrated BMS. That design choice puts voltage management in the hands of your flight controller or power module, so plan your failsafe thresholds before the first flight.
Key Features
- 3S3P lithium-ion assembly with 11.1V nominal output
- 12600mAh nominal capacity for extended operating time
- 11C continuous discharge rating
- XT-60 main connector and 4-pin JST XH charge connector
- Impedance-matched cells for balanced, consistent output
- Compact 75mm length and approximately 720g weight
- No cell puffing or bulging, a common lithium-ion advantage over lithium-polymer
Specifications Explained
Voltage window
Nominal voltage is 11.1V. Charge to a maximum of 12.6V and treat 8.7V as the lowest safe discharge point. For failsafe planning, set the battery trigger at 9.6V, which leaves roughly 20 percent reserve before the minimum flying voltage.
Capacity and discharge
At 12600mAh the pack offers substantial runtime for avionics and payload electronics. The 11C continuous rating describes how much current the pack can supply steadily, so match your propulsion and accessory draw to that figure.
Charging
The 4-pin JST XH connector is the charge path, and the pack accepts a 5C charging current. Use a charger configured for the 12.6V maximum and confirm the connector pinout before connecting.
Size and weight
At 75mm long and about 720g, the pack fits airframes where a longer or heavier brick would shift the centre of gravity. Shipping weight is 0.77kg in a 15 x 13 x 10cm carton.
Compatibility and Requirements
The pack connects to systems using an XT-60 discharge plug and a 4-pin JST XH charge lead. Because no BMS is included, your aircraft must provide its own low-voltage protection and failsafe logic. Do not rely on the pack to cut itself off.
Typical Uses
Well suited to drone avionics, long-endurance airframes, and electronics bays where lithium-ion energy density and a flat discharge profile are preferred over lithium-polymer. The pack also performs in cold conditions, with stated operation below -20 degrees Celsius.
What's in the Box
One Pro-Range INR P42A 11.1V 12600mAh 11C 3S3P compact lithium-ion drone avionics battery pack with XT-60 connector.

Quick specs
- Nominal Voltage (V)
- 11.1
- Nominal Capacity (mAh)
- 12600 mAh
- Continuous Discharge Current (A)
- 11C
- BMS (Y/N)
- N
- Charge Connector
- 4 Pin JST XH
- Max. Charging Voltage (V)
- 12.6


















