Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A lightweight 3S 4200mAh Li-ion avionics pack with XT-60 discharge and JST-XH charge connectors. Impedance-matched INR P42A cells provide stable 11.1V power without Li-Po puffing.

Key Highlights

  • 11.1V nominal 3S1P Li-ion pack with 4200mAh capacity
  • 11C continuous discharge rating for moderate-current avionics
  • Impedance-matched INR P42A cells for consistent output
  • Compact 70 x 65mm footprint at approximately 240g
  • Amass XT-60 discharge and 4-pin JST XH charge connectors
  • Resists puffing and performs in temperatures below -20C

Ideal For

  • Drone builders using 3S avionics power
  • FPV pilots needing a compact Li-ion pack
  • RC hobbyists with 11.1V electronics
  • Endurance drone projects
  • Users wanting a low-maintenance Li-ion alternative to Li-Po

Buying Tip

Confirm your charger supports 3S Li-ion and the 4-pin JST XH balance connector before ordering.

Elecvora expert review

Our verdict

A well-built 3S Li-ion pack that offers stable avionics power in a light, compact form. It is a practical choice for pilots who value cold-weather reliability and no puffing over high burst current.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Impedance-matched INR P42A cells
  • Lightweight at approximately 240g
  • Cold-weather performance below -20C
  • No puffing or bulging
  • Standard XT-60 and JST XH connectors

Cons

  • No integrated BMS, so external monitoring is needed
  • 11C rating limits use to moderate-current applications
  • Requires a Li-ion compatible charger

Best for

Drone avionics and endurance builds needing a compact 3S Li-ion pack

Not ideal for

High-burst-current applications such as aggressive FPV racing

Specifications

Nominal Voltage (V)11.1
Nominal Capacity (mAh)4200 mAh
Continuous Discharge Current (A)11C
BMS (Y/N)N
Charge Connector4 Pin JST XH
Discharge PortAmass XT60
Length (mm)70
Width (mm)65
Weight (g)~240
Model Series3
Shipping Weight0.25 kg
Shipping Dimensions13 × 11 × 6 cm

What's in the box

  • 1 x Pro-Range INR P42A 11.1V 4200mAh 11C 3S1P in-line Li-ion Drone Avionics Battery Pack with XT-60

Frequently Asked Questions

What voltage should I set for battery failsafe?
Set the failsafe trigger at 9.6V, which leaves about 20% reserve. The minimum voltage for flying is 8.7V.
Can I charge this pack with a standard Li-Po charger?
Only if your charger supports 3S Li-ion mode and the 4-pin JST XH balance connector. Do not use a Li-Po-only profile.
Does this battery have a built-in BMS?
No, there is no BMS. You must monitor voltage externally to prevent over-discharge.
What connectors are on the pack?
It has an Amass XT-60 discharge connector and a 4-pin JST XH charge connector.
Is this battery suitable for cold weather?
Yes, it is rated for superior performance at temperatures below -20C.
What is included in the package?
The package includes one Pro-Range INR P42A 11.1V 4200mAh 11C 3S1P Li-ion battery pack with XT-60.

Overview

The Pro-Range INR P42A 11.1V 4200mAh 11C 3S1P in-line Li-ion Drone Avionics Battery Pack is designed for drone electronics that require a dependable 3-cell lithium-ion power source. It uses INR P42A cells assembled with impedance matching, so each cell in the pack behaves consistently under load. The result is a compact 70 x 65mm pack weighing roughly 240g that fits space-constrained airframes while offering 4200mAh of nominal capacity.

Unlike typical Li-Po packs, this lithium-ion design does not puff or bulge during normal use and continues to deliver usable output in cold conditions below -20C. It is a sensible option for avionics, telemetry, and endurance-focused builds where stable voltage and low maintenance matter more than extreme burst current.

Key Features

  • 3S1P configuration with 11.1V nominal voltage and 4200mAh capacity
  • 11C continuous discharge rating for avionics and moderate-load electronics
  • Impedance-matched INR P42A cells for balanced performance
  • Amass XT-60 discharge connector and 4-pin JST XH charge connector
  • Compact 70 x 65mm dimensions and approximately 240g weight
  • No puffing or bulging, with reliable operation in sub-zero temperatures

Specifications Explained

Voltage and capacity: The 11.1V nominal rating reflects three lithium-ion cells in series, giving a full-charge voltage of 12.6V. The 4200mAh capacity provides reserve for avionics and low-to-moderate current draw.

Discharge rating: An 11C continuous rating indicates the pack can supply current multiples of its capacity, making it appropriate for electronics that do not demand high burst currents.

Connectors: The XT-60 discharge port is a common, robust connector for drone power leads. The 4-pin JST XH charge connector supports balance charging through a compatible charger.

Size and weight: At 70 x 65mm and about 240g, the pack suits airframes where volume and mass are tight.

Compatibility and Requirements

This pack is intended for drone avionics and RC applications that accept a 3S lithium-ion input. Use a charger compatible with 3S Li-ion packs and the 4-pin JST XH balance connector. For safe operation, configure a battery failsafe trigger at 9.6V (approximately 20% reserve) and treat 8.7V as the minimum voltage for flying. No BMS is integrated, so external voltage monitoring is required.

Typical Uses

Ideal for drone avionics, telemetry systems, and endurance-oriented builds that need a stable 11.1V supply. It also suits RC electronics and ground equipment where a compact 3S Li-ion pack is preferred over a Li-Po.

What's in the Box

1 x Pro-Range INR P42A 11.1V 4200mAh 11C 3S1P in-line Li-ion Drone Avionics Battery Pack with XT-60.

Quick specs

Nominal Voltage (V)
11.1
Nominal Capacity (mAh)
4200 mAh
Continuous Discharge Current (A)
11C
BMS (Y/N)
N
Charge Connector
4 Pin JST XH
Discharge Port
Amass XT60
See all specifications