
1 / 3 · Click to enlarge
AI Summary
A compact 22.2V 16800mAh 6S4P Li-ion drone battery pack with an 11C discharge rate and XT90 AS connector. It gives surveillance and E-VTOL platforms extended capacity with a balance lead for proper cell management.
Key Highlights
- 16800mAh capacity supports extended surveillance and E-VTOL flight missions
- 22.2V nominal 6S4P configuration for stable, consistent power delivery
- 11C discharge rate for reliable high-current UAV operation
- Amass XT90 AS discharge connector for secure high-current hookup
- JST-RCY-BEC charge and 7-pin JST XH balance connectors for safe charging
- Compact Li-ion block measuring about 170 x 70 x 68mm and weighing 1.822kg
Ideal For
- Commercial surveillance drone operators flying long-endurance missions
- E-VTOL aircraft builders using 6S Li-ion power systems
- Professional UAV teams needing a compact high-capacity pack
- Drone technicians maintaining 22.2V nominal platforms
- Operators who prefer Li-ion packs with balance leads for cell management
Buying Tip
Check that your drone's power system and charger accept a 6S Li-ion pack with XT90 AS, JST-RCY-BEC and 7-pin JST XH connectors before ordering.
Elecvora expert review
Our verdict
This pack pairs a generous 16800mAh capacity with a 22.2V 6S4P layout and an 11C rating, making it a practical choice for surveillance and E-VTOL platforms that need endurance without a bulky pack. The XT90 AS discharge connector and separate charge and balance leads show it is built for real UAV workflows.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 16800mAh capacity for longer missions
- Stable 22.2V nominal 6S output
- 11C discharge rate for high-current UAV use
- Proper charge and 7-pin balance connectors
- Compact block format for tight airframes
Cons
- Requires a charger compatible with the JST-RCY-BEC and 7-pin JST XH connectors
- At about 1.822kg, airframe weight and balance must be planned
- Only suitable for platforms designed around a 6S Li-ion pack
Best for
Surveillance and E-VTOL drone platforms needing a compact, high-capacity 6S Li-ion pack
Not ideal for
Pilots whose aircraft or charger cannot accept a 6S Li-ion pack with XT90 AS and JST connectors
Specifications
| Shipping Weight | 1.925 kg |
|---|---|
| Shipping Dimensions | 19 × 13 × 9 cm |
What's in the box
- 1 x Pro-Range INR P42A 22.2V 16800mAh 11C 6S4P Surveillance and E-VTOL Drone Compact Li-ion Battery Pack with XT-90AS
Frequently Asked Questions
What voltage does this battery pack deliver?
What connectors does the pack have?
What is the capacity and discharge rate?
How large and heavy is the pack?
What is included in the package?
How should I charge and store it?
Overview
The Pro-Range INR P42A 22.2V 16800mAh 11C 6S4P battery pack is a Li-ion power block designed for surveillance drones and E-VTOL aircraft that need long operational time and steady output. It uses INR P42A cells arranged in a 6S4P configuration, giving a 22.2V nominal voltage and 16800mAh nominal capacity in a compact format measuring approximately 170 x 70 x 68mm and weighing about 1.822kg.
Rather than a soft pouch cell pack, this is a Li-ion pack built for professional UAV platforms where consistent energy delivery and efficient use of space are priorities. The 11C discharge rate supports demanding current draws, and the connector set is chosen for high-current discharge plus proper charging and balancing.
Key Features
- 16800mAh nominal capacity for extended flight endurance on professional missions.
- 22.2V nominal output across a 6S4P configuration for balanced voltage and efficient energy use.
- 11C discharge rate for reliable high-current performance.
- Amass XT90 AS discharge connector for a secure, high-current main connection.
- JST-RCY-BEC female charge connector for convenient charging.
- 7-pin JST XH balance connector for safe cell balancing during charging.
Specifications Explained
6S4P configuration: six cells in series set the nominal 22.2V output, while four parallel groups raise capacity to 16800mAh. The result is a pack that delivers both voltage and endurance rather than trading one for the other.
11C discharge rate: this rating describes how quickly the pack can deliver current relative to its capacity. It suits UAV platforms that draw substantial current during climbs, hover corrections or payload operation.
Connector set: the XT90 AS handles the main discharge path, the JST-RCY-BEC female connector is used for charging, and the 7-pin JST XH lead lets a suitable charger monitor and balance the individual cell groups. Keep each connector matched to its intended role.
Compatibility and Requirements
This pack is intended for surveillance and E-VTOL drone applications that accept a 22.2V nominal 6S Li-ion pack. Your airframe, power distribution and charger must be compatible with the XT90 AS discharge connector, the JST-RCY-BEC female charge connector and the 7-pin JST XH balance connector. Confirm that your drone's electronics and charger are rated for a 6S Li-ion pack before connecting.
Typical Uses
- Surveillance UAV missions requiring extended endurance.
- E-VTOL aircraft platforms needing a compact, high-capacity pack.
- Professional drone operations where stable voltage matters.
- Commercial UAV builds that use a 6S Li-ion power architecture.
What's in the Box
- 1 x Pro-Range INR P42A 22.2V 16800mAh 11C 6S4P Surveillance and E-VTOL Drone Compact Li-ion Battery Pack with XT-90AS


















