Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 3S1P 4500mAh Li-ion pack shaped as a triangle to fit 4-inch FPV frames, with XT30 discharge and JST-RCY-BEC charge connectors. Its 10C rating and 4500mAh capacity make it a sensible pick for longer, efficiency-focused flights.

Key Highlights

  • 4500mAh 3S1P Li-ion capacity for extended endurance flights
  • 10C continuous discharge suited to cruising and moderate loads
  • Triangle form factor designed to fit compact 4-inch FPV frames
  • Amass XT30 discharge connector for a secure main power link
  • JST-RCY-BEC female charge connector and 4-pin JST XH balance lead
  • Built around INR P45B cells for stable 11.1V nominal output

Ideal For

  • Pilots flying 4-inch FPV frames who want longer flight times
  • Long-range and endurance FPV enthusiasts
  • Cinematic aerial pilots flying smooth, efficient lines
  • Hobbyists building compact quads with limited battery space
  • Flyers who prefer lithium-ion packs for steady voltage output

Buying Tip

Measure your 4-inch frame's battery bay against the 76.9 x 41.7 x 43.3mm triangle shape and confirm your charger handles 3S Li-ion before ordering.

Elecvora expert review

Our verdict

The Pro-Range INR P45B makes sense for pilots who prioritise time in the air over punchy power, and its triangle shape is a thoughtful fit for tight 4-inch frames. It is a specialised endurance pack rather than an all-round performer.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 4500mAh capacity supports longer cruise flights
  • Triangle form factor fits compact 4-inch frames
  • XT30 discharge plus JST-RCY-BEC and JST XH balance leads cover the essentials
  • INR P45B cells provide stable 11.1V nominal output
  • 238g weight keeps the build reasonably light

Cons

  • 10C rating limits aggressive high-throttle flying
  • Requires a charger compatible with the JST-RCY-BEC and JST XH connectors
  • Only listed for 4-inch FPV frames, so other sizes are unverified

Best for

Endurance and long-range pilots flying 4-inch FPV quads

Not ideal for

Racing pilots needing very high burst current

Specifications

Battery TypeLi-Ion
Item TypeBattery Pack
Compatibility4-inch FPV Frames
Discharge Rate10C
Discharge ConnectorAmass XT30
Charge ConnectorJST-RCY-BEC Female
Configuration3S1P
Nominal Voltage (V)11.1
Nominal Capacity (mAh)4500mAh
Shipping Weight0.288 kg
Shipping Dimensions11 × 9 × 7 cm

What's in the box

  • 1 x Pro-Range INR P45B 11.1V 4500mAh 10C 3S1P 4-inch FPV Drone Triangle Li-ion Battery Pack with XT-30 and JST-RCY-BEC

Frequently Asked Questions

What voltage does this battery deliver?
It is a 3S pack with 11.1V nominal and 12.6V when fully charged. Confirm your drone's electronics are rated for a 3S lithium-ion input.
Which connectors does it use?
Discharge is through an Amass XT30 connector, charging through a JST-RCY-BEC female connector, and balancing through a 4-pin JST XH lead.
What frames is it compatible with?
It is listed for 4-inch FPV frames. Check the 76.9 x 41.7 x 43.3mm dimensions against your frame's battery space before fitting.
What is included in the package?
The package contains one Pro-Range INR P45B 11.1V 4500mAh 10C 3S1P triangle Li-ion battery pack with XT30 and JST-RCY-BEC connectors.
Is the 10C discharge rate enough for racing?
The 10C rating suits cruising and moderate loads. For aggressive racing with very high current draw, a pack with a higher discharge rating is more appropriate.
How should I care for this Li-ion pack?
Balance charge it with a 3S Li-ion profile, avoid running cells too low, and store it at partial charge when not in use.

Overview

The Pro-Range INR P45B is a 3S1P lithium-ion battery pack intended for 4-inch FPV drone frames. With a nominal voltage of 11.1V and a capacity of 4500mAh, it is aimed at pilots who value flight time and steady output over short, high-current bursts. The pack uses INR P45B cells and is arranged in a triangle form factor, a shape chosen to fit neatly into compact 4-inch builds where space is limited.

Power leaves the pack through an Amass XT30 discharge connector, while charging is handled through a JST-RCY-BEC female connector. A 4-pin JST XH balance lead lets you monitor and balance the three cells with a compatible charger.

Key Features

  • 4500mAh capacity: gives endurance-minded pilots more runtime per pack than small-capacity alternatives.
  • 3S1P configuration: three cells in series deliver 11.1V nominal, rising to 12.6V when fully charged.
  • 10C discharge rate: matched to efficient cruising and moderate load applications rather than extreme current draw.
  • Triangle form factor: shaped specifically for 4-inch FPV frames.
  • Dual connector setup: XT30 for discharge, JST-RCY-BEC female for charging.
  • INR P45B cells: a known lithium-ion cell format used here for stable voltage delivery.

Specifications Explained

Capacity and voltage

At 4500mAh, the pack stores enough energy for longer cruise-style flights. The 3S arrangement gives 11.1V nominal and 12.6V at full charge, so confirm your drone's electronics and motor set are rated for a 3S lithium-ion input before use.

Discharge rate

The 10C rating describes a moderate continuous discharge capability. It suits efficient cruising and gentle freestyle, but it is not intended for aggressive, high-throttle racing where much higher burst currents are demanded.

Connectors

The XT30 discharge connector is a compact, keyed plug that resists accidental reverse connection. Charging runs through the JST-RCY-BEC female connector, and the 4-pin JST XH lead allows balance charging. Check that your charger and leads match these connector types.

Compatibility and Requirements

This pack is listed as compatible with 4-inch FPV frames. You will need a charger that supports 3S lithium-ion packs and can connect to the JST-RCY-BEC charge connector and the 4-pin JST XH balance lead. Your drone's power lead must terminate in a matching XT30 plug. The pack weighs 238g and measures approximately 76.9mm long, 41.7mm wide and 43.3mm high, so verify clearance inside your frame before installing.

Typical Uses

  • Long-range and endurance cruising with 4-inch FPV builds
  • Cinematic aerial filming where smooth, extended flight matters
  • Practice sessions that benefit from longer time in the air
  • Moderate-load freestyle flying rather than competitive racing

What's in the Box

1 x Pro-Range INR P45B 11.1V 4500mAh 10C 3S1P 4-inch FPV Drone Triangle Li-ion Battery Pack with XT-30 and JST-RCY-BEC.

Quick specs

Battery Type
Li-Ion
Item Type
Battery Pack
Compatibility
4-inch FPV Frames
Discharge Rate
10C
Discharge Connector
Amass XT30
Charge Connector
JST-RCY-BEC Female
See all specifications