
1 / 3 · Click to enlarge
AI Summary
A 4S3P lithium-ion pack delivering 13500mAh at 14.8V with a 10C discharge rating for 7-inch and 10-inch FPV drones. Its XT60 output and JST-XH balance connector make long-endurance builds easier to power and maintain.
Key Highlights
- 13500mAh nominal capacity for extended flight time
- 14.8V nominal 4S3P configuration for balanced voltage
- 10C discharge rate for steady current draw
- Premium INR P45B lithium-ion cells
- Amass XT60 discharge and JST-RCY-BEC charge connectors
- Compact 128 x 70 x 44 mm body fits 7 and 10 inch frames
Ideal For
- Pilots building 7-inch long-range FPV drones
- Operators of 10-inch surveillance or inspection UAVs
- Industrial UAV teams needing a compact 4S lithium-ion pack
- Hobbyists moving from LiPo to lithium-ion endurance setups
Buying Tip
Check that your charger supports a 5-pin JST-XH balance lead and that your frame has room for a 128 x 70 x 44 mm, roughly 910 g pack before ordering.
Elecvora expert review
Our verdict
A sensible choice for large FPV builds where flight time outweighs the need for extreme burst current. The 4S3P layout, 13500mAh capacity and standard XT60 output make it easy to plan around.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Large 13500mAh capacity for endurance flights
- Standard Amass XT60 discharge connector
- Balance lead included for proper charging
- Compact body for 7-inch and 10-inch frames
Cons
- 10C rating limits high-burst applications
- Around 910 g adds weight that some frames may not carry well
- Requires a compatible balance charger and leads, not included
Best for
Long-range and surveillance FPV builds in 7-inch and 10-inch classes
Not ideal for
High-burst racing or freestyle quads needing very high discharge rates
Specifications
| Shipping Weight | 0.98 kg |
|---|---|
| Shipping Dimensions | 16 × 10 × 6.0 cm |
What's in the box
- 1 x Pro-Range INR P45B 14.8V 13500mAh 10C 4S3P 7" & 10" FPV Drone Compact Li-ion Battery Pack with XT-60
Frequently Asked Questions
What voltage does this battery deliver?
Which drones is it compatible with?
What connectors does it have?
What is included in the box?
How should I charge it?
How big and heavy is the pack?
Overview
The Pro-Range INR P45B is a compact lithium-ion battery pack made for large-format FPV drones that need endurance rather than short bursts of speed. It uses a 4S3P layout: four cells in series to reach 14.8V nominal, with three parallel strings to raise capacity to 13500mAh. Premium INR P45B cells form the core of the pack, and the result is a power source suited to surveillance flights, long-range cruising and industrial UAV platforms.
Key Features
- High capacity: 13500mAh nominal capacity supports longer missions between charges.
- Stable voltage: the 4S3P configuration helps keep cell groups balanced under load.
- 10C discharge rating: handles continuous current draw for demanding tasks.
- Practical connectors: Amass XT60 for discharge, JST-RCY-BEC female for charging and a 5-pin JST-XH balance lead.
- Compact footprint: 128 x 70 x 44 mm and about 910 g, sized for 7-inch and 10-inch frames.
Specifications Explained
Capacity and voltage
13500mAh is the nominal capacity, and 14.8V is the nominal voltage of the four-series arrangement. Together they define how much energy the pack carries and what your power system should expect. Always confirm your drone's electronics are rated for a 4S lithium-ion pack before connecting it.
Discharge rate
The 10C rating describes the steady current the pack is designed to supply. It is a guide for matching the battery to your motors and ESCs, not a target to exceed.
Connectors
The XT60 handles discharge, the JST-RCY-BEC female connector is used for charging, and the 5-pin JST-XH lead lets a balance charger monitor the cell groups. Check that your charger and wiring match these connectors before first use.
Compatibility and Requirements
This pack is intended for 7-inch FPV drones, 10-inch FPV drones, surveillance drones and industrial UAV platforms. You will need a compatible balance charger with a 5-pin JST-XH connection and a charging lead that fits the JST-RCY-BEC female port. Confirm that your frame can carry a pack of roughly 910 g and provide space for the 128 x 70 x 44 mm body.
Typical Uses
- Long-range cruising with 7-inch and 10-inch FPV builds
- Surveillance and inspection flights where flight time matters
- Industrial UAV platforms needing a compact 4S lithium-ion source
- Endurance-focused builds that favour capacity over peak burst current
What's in the Box
1 x Pro-Range INR P45B 14.8V 13500mAh 10C 4S3P 7" & 10" FPV Drone Compact Li-ion Battery Pack with XT-60.


















