
1 / 3 · Click to enlarge
AI Summary
Pro-Range INR P45B 4S 4500mAh Li-ion battery pack for 4" and 5" FPV drones. Impedance-matched cells and XT-60 connector deliver reliable power for longer flight times.
Key Highlights
- 14.8V nominal 4S1P Li-ion pack with 4500mAh capacity
- 10C continuous discharge for stable FPV power
- Impedance-matched cells for balanced performance
- Compact and lightweight at approximately 313g
- XT-60 discharge port and 5-pin JST XH charge connector
- Supports up to 5C charging for quick turnaround
Ideal For
- FPV pilots flying 4-inch and 5-inch drones
- Drone enthusiasts seeking longer flight times
- Freestyle and cruising pilots
- Builders looking for a compact 4S Li-ion pack
- Pilots with compatible XT-60 setups
Buying Tip
Verify your drone's battery compartment dimensions (70 x 40mm) and connector type (XT-60) before ordering to ensure a proper fit.
Elecvora expert review
Our verdict
The Pro-Range INR P45B offers a solid balance of capacity and weight for 4-inch and 5-inch FPV drones. Its impedance-matched cells and 10C discharge rating make it a dependable choice for pilots prioritizing flight time.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 4500mAh capacity for longer flights
- Lightweight at approximately 313g
- Impedance-matched cells for consistent performance
- Standard XT-60 connector for wide compatibility
Cons
- No BMS, so voltage must be monitored manually
- Requires a compatible Li-ion charger with JST XH port
- Not suitable for high-discharge racing applications
Best for
FPV pilots flying 4-inch and 5-inch drones who want extended flight times
Not ideal for
Racing drones or setups requiring very high burst currents
Specifications
| Nominal Voltage (V) | 14.8 |
|---|---|
| Nominal Capacity (mAh) | 4500 mAh |
| Continuous Discharge Current (A) | 10C |
| BMS (Y/N) | N |
| Charge Connector | 5 Pin JST XH, 134261 |
| Discharge Port | Amass XT60 |
| Max. Charging Voltage (V) | 16.8 |
| Max. Discharging Voltage (V) | 11.6 |
| Charging Current | 5C |
| Length (mm) | 70 |
| Width (mm) | 40 |
| Weight (g) | ~313 |
| Model Series | 4 |
| Shipping Weight | 0.363 kg |
| Shipping Dimensions | 12 × 11 × 6 cm |
What's in the box
- 1 x Pro-Range INR P45B 14.8V 4500mAh 10C 4S1P Li-ion Battery Pack with XT-60
Frequently Asked Questions
What is the maximum charging voltage for this battery?
What minimum voltage should I avoid going below?
What connector does this battery use?
Is this battery compatible with my 5-inch FPV drone?
What is included in the package?
How should I care for this battery?
Overview
The Pro-Range INR P45B is a 4S1P lithium-ion battery pack built for 4-inch and 5-inch FPV drones. It combines four 4500mAh cells to deliver a nominal 14.8V with a 10C continuous discharge rating. The pack is assembled using impedance-matched cells, which helps maintain consistent output across the battery. Its compact size and low weight for the capacity make it a practical choice for pilots seeking longer flight times without adding bulk.
Key Features
- High-capacity 4S Li-ion pack: 4500mAh nominal capacity provides ample energy for extended FPV flights.
- 10C continuous discharge: Supports the current demands of 4-inch and 5-inch quad setups.
- Impedance-matched cells: Each cell is matched for internal resistance to promote balanced performance and longevity.
- XT-60 discharge port: Industry-standard connector for secure, low-resistance power transfer.
- 5-pin JST XH charge connector: Enables balance charging with compatible chargers.
- Compact and lightweight: Measures 70 x 40mm and weighs approximately 313g, keeping your build agile.
Specifications Explained
Nominal voltage and capacity: At 14.8V and 4500mAh, this pack stores a substantial amount of energy for its size. The 4S configuration (four cells in series) delivers higher voltage than a 3S pack, which can improve efficiency and thrust in compatible drones.
Discharge and charge ratings: The 10C continuous discharge rating indicates the pack can supply current up to 10 times its capacity (45A) continuously. The 5C charging rating allows a maximum charge current of 22.5A, though you should always use a charger that supports the pack's requirements.
Voltage limits: Charge the pack to a maximum of 16.8V (4.2V per cell). For flight safety, land when the pack reaches 11.6V under load to avoid over-discharge. A battery failsafe trigger around 12.8V (about 20% reserve) is recommended for drone applications.
Dimensions and weight: The pack measures 70mm long, 40mm wide, and weighs roughly 313g. These dimensions make it suitable for many 4-inch and 5-inch frames, but always check your frame's battery compartment.
Compatibility and Requirements
This pack is designed for 4-inch and 5-inch FPV drones that accept a 4S Li-ion battery with an XT-60 connection. It requires a compatible Li-ion balance charger with a 5-pin JST XH port. Ensure your drone's power system and ESCs are rated for 4S voltage (16.8V maximum). The pack does not include a BMS, so you must monitor voltage during use and avoid over-discharge.
Typical Uses
Ideal for FPV cruising, endurance flights, and freestyle flying with 4-inch and 5-inch quadcopters. It also suits long-range setups where capacity and weight are critical. The pack's stable output makes it a good choice for pilots who prefer Li-ion chemistry over Li-Po for longer flight times.
What's in the Box
- 1 x Pro-Range INR P45B 14.8V 4500mAh 10C 4S1P Li-ion Battery Pack with XT-60
Quick specs
- Nominal Voltage (V)
- 14.8
- Nominal Capacity (mAh)
- 4500 mAh
- Continuous Discharge Current (A)
- 10C
- BMS (Y/N)
- N
- Charge Connector
- 5 Pin JST XH, 134261
- Discharge Port
- Amass XT60


















