Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 22.2V 4500mAh 6S1P lithium-ion drone pack using Molicel P45B cells with a 10C continuous discharge rating. Its impedance-matched construction and compact in-line format suit E-VTOL and multirotor builds that need dependable energy density.

Key Highlights

  • 22.2V nominal 6S1P lithium-ion pack with 4500mAh capacity
  • 10C continuous discharge rating for steady high-current draw
  • Built from impedance-matched Molicel P45B cells for consistent output
  • Compact in-line format at 125 x 70mm and about 480g
  • Amass XT60 discharge port plus 7-pin JST XH charge connector
  • No BMS, so voltage limits are managed by the pilot

Ideal For

  • E-VTOL drone builders needing a compact 6S lithium-ion pack
  • Multirotor pilots moving from Li-Po to a lithium-ion pack
  • Long-endurance airframe projects with space-limited battery bays
  • Builders comfortable managing voltage limits without a BMS
  • Pilots already using XT60 power connections

Buying Tip

Confirm your charger supports the 7-pin JST XH charge connector and can be set for a 6S lithium-ion pack before you buy, since there is no BMS to protect the cells.

Elecvora expert review

Our verdict

A well-considered 6S lithium-ion pack for E-VTOL and multirotor builds, using impedance-matched Molicel P45B cells in a compact in-line format. It rewards pilots who understand voltage management, since the absence of a BMS puts limits firmly in your hands.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Impedance-matched Molicel P45B cells for consistent output
  • Compact 125 x 70mm in-line footprint at about 480g
  • 10C continuous discharge rating
  • Standard Amass XT60 discharge port
  • Dedicated 7-pin JST XH charge connector

Cons

  • No BMS, so over-discharge protection is the pilot's responsibility
  • Requires a charger compatible with the 7-pin JST XH connector
  • Only suitable for airframes that accept a 6S lithium-ion pack

Best for

E-VTOL and multirotor builders wanting a compact 6S lithium-ion pack

Not ideal for

Beginners who want plug-and-play protection or users without a compatible charger

Specifications

Nominal Voltage (V)22.2
Nominal Capacity (mAh)4500 mAh
Continuous Discharge Current (A)10C
BMS (Y/N)N
Charge Connector7 Pin JST XH
Discharge PortAmass XT60
Max. Charging Voltage (V)25.2
Max. Discharging Voltage (V)17.4
Charging Current5C
Length (mm)125
Width (mm)70
Weight (g)~480
Model Series6
Shipping Weight0.53 kg
Shipping Dimensions16 × 11 × 6 cm

What's in the box

  • 1 x Pro-Range INR P45B 22.2V 4500mAh 10C 6S1P E-VTOL Drone in-line Li-ion Battery Pack with XT-60

Frequently Asked Questions

What voltage should I stop flying at?
The maximum discharging voltage is 17.4V, which is the minimum for flying. A battery failsafe at 19.2V is a sensible reserve threshold to set in your flight controller.
Does this pack have a built-in BMS?
No. The pack has no battery management system, so you must manage charge and discharge limits through your charger and flight controller settings.
What connectors does it use?
The main discharge port is an Amass XT60, and charging is done through a 7-pin JST XH connector.
What is the maximum charging voltage?
The maximum charging voltage is 25.2V. Set your charger for a 6S lithium-ion pack and do not exceed this ceiling.
What is included with the battery?
The package contains one Pro-Range INR P45B 22.2V 4500mAh 10C 6S1P in-line Li-ion battery pack with XT-60.
How should I care for this pack?
Keep it within its voltage limits, charge only with a compatible charger, avoid physical damage, and never leave it charging unattended.

Overview

The Pro-Range INR P45B is a 6S1P lithium-ion battery pack designed for drone and E-VTOL applications where energy density and pack weight matter. It uses high-performance Molicel P45B cells, and every pack is assembled from impedance-matched cells so the series string stays balanced in behaviour under load. The result is a 22.2V nominal pack with 4500mAh capacity in an in-line layout measuring 125 x 70mm and weighing approximately 480g.

This is a bare pack without a battery management system. That keeps the design simple and light, but it also means the pilot is responsible for observing correct charge and discharge limits at all times.

Key Features

  • Molicel P45B cells: high-performance cells selected for drone duty.
  • Impedance-matched construction: cells are matched to support consistent pack performance.
  • 10C continuous discharge: suited to platforms that draw sustained current.
  • Compact in-line shape: 125 x 70mm footprint fits space-limited airframes.
  • XT60 discharge port: an Amass XT60 connector for the main power lead.
  • 7-pin JST XH charge connector: dedicated balance-style charging interface.

Specifications Explained

Voltage and capacity

The pack is rated at 22.2V nominal with a 4500mAh capacity. Its maximum charging voltage is 25.2V, which is the full-charge ceiling for a 6S lithium-ion string, and the maximum discharging voltage is 17.4V. Treat 17.4V as the floor: do not plan to fly below it.

Discharge and charge rates

The 10C continuous discharge rating describes how much current the pack is built to supply steadily. Charging current is specified at 5C, but a gentler charge rate is generally kinder to cell life. Always stay within the stated limits and use a charger configured for the correct chemistry and cell count.

No BMS

There is no integrated battery management system. You must set charger cut-offs and flight-controller failsafe thresholds yourself, and you should never leave the pack unattended while charging.

Compatibility and Requirements

The pack connects to an airframe through its Amass XT60 discharge port, so your power lead needs a matching XT60 connector. Charging uses the 7-pin JST XH connector, so a compatible charger and lead are required. Because the pack is a 6S lithium-ion configuration, your charger must be set for the correct cell count and chemistry, and your flight controller should be configured with voltage thresholds appropriate to a 22.2V nominal pack.

Typical Uses

This pack is intended for E-VTOL drone builds and multirotor platforms that can accept a 6S lithium-ion pack in an in-line format. It suits applications where a compact, comparatively light pack with good energy density is preferable to a bulkier alternative. It is not a drop-in replacement for every airframe, so check connector type, dimensions and weight against your build before ordering.

What's in the Box

  • 1 x Pro-Range INR P45B 22.2V 4500mAh 10C 6S1P E-VTOL Drone in-line Li-ion Battery Pack with XT-60

Quick specs

Nominal Voltage (V)
22.2
Nominal Capacity (mAh)
4500 mAh
Continuous Discharge Current (A)
10C
BMS (Y/N)
N
Charge Connector
7 Pin JST XH
Discharge Port
Amass XT60
See all specifications