
1 / 9 · Click to enlarge
AI Summary
A complete DIY robot kit that uses an Arduino UNO and three ultrasonic sensors to follow objects, stop automatically, and search 360°. It requires no soldering and includes all essential hardware for immediate assembly.
Key Highlights
- Arduino UNO R3 controller for easy programming via Arduino IDE
- Three HC-SR04 ultrasonic sensors for left, center, and right detection
- L298N dual H-bridge driver controls four BO motors with PWM speed control
- Obstacle following, emergency stop, and 360° object search modes
- Plug-and-play jumper wires—no soldering required
- Includes chassis, wheels, motors, battery holder, and user manual
Ideal For
- Students learning embedded systems and robotics
- Beginners building their first autonomous robot
- Hobbyists exploring sensor-based navigation
- STEM educators looking for hands-on kits
- Makers interested in Arduino projects
Buying Tip
Consider picking up a spare 9V battery if you plan extended testing sessions, as the included battery is best for initial setup and short runs.
Elecvora expert review
Our verdict
This kit offers a well-rounded introduction to autonomous robotics with genuine Arduino-based control and multiple sensors. It is an excellent value for learners who want a complete, no-solder project that teaches core concepts.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Complete kit with all essential hardware included
- Three ultrasonic sensors enable advanced following logic
- No soldering required—beginner-friendly
- Open-source Arduino platform for easy customization
- Clear learning path for embedded systems
Cons
- Requires assembly and coding, which may challenge absolute beginners
- 9V battery may need frequent replacement during extended use
- Plastic chassis may be less durable than metal options
Best for
Students and hobbyists new to robotics who want a hands-on Arduino project
Not ideal for
Users seeking a pre-assembled, ready-to-run robot
Specifications
| Item Type | Object Following Robot Kit |
|---|---|
| Assembled (Y/N) | N |
| Controller | Arduino UNO R3 |
| Motor Driver | L298N Dual H-Bridge Driver |
| Sensors details | 3× HC-SR04 Ultrasonic Sensors (Left, Center, Right) |
| Motor Rating | 4× BO Motors (100–300 RPM, 6V–12V DC) |
| Chassis | Acrylic/Metal base with 4-wheel mount |
| Power Supply Voltage (V) | 9V Battery (via Battery Holder and Clip Connector) |
| Speed Control (Y/N) | Y, PWM-based motor speed control |
| Detection range | 2 cm – 400 cm (Ultrasonic Sensor) |
| Modes of Operation | Obstacle Following, Emergency Stop, 360° Object Search |
| Programming Platform | Arduino IDE |
| Weight (g) | 802 |
| Shipping Weight | 0.802 kg |
| Shipping Dimensions | 26 × 18 × 8 cm |
What's in the box
- 1× Arduino UNO Board with Cable
- 3× HC-SR04 Ultrasonic Sensors
- 1× L298N Motor Driver Module
- 1× Car Chassis Kit (includes 4 wheels and 4 BO motors)
- 1× 9V Battery
- 1× 18650 Battery Holder
- 1× 9V Battery Clip Connector with DC Plug
- 2× Sets of Male-to-Female Jumper Wires
- 1× Set of Male-to-Male Jumper Wires
- 1× Screwdriver and Fastener Set
- 1× User Manual
Frequently Asked Questions
Is soldering required to assemble this kit?
What programming language is used?
Can I power the robot with a different battery?
What is the detection range of the ultrasonic sensors?
Does the kit include a battery?
Is there a warranty?
Overview
The Pro-Range Object Following Robot Kit is a hands-on learning platform that introduces you to autonomous robotics. At its core is an Arduino UNO R3, which processes distance data from three HC-SR04 ultrasonic sensors positioned at the left, center, and right. This sensor array allows the robot to detect objects in front and to the sides, enabling smooth following behavior. The L298N motor driver translates the Arduino's commands into precise motor control for four BO motors mounted on a four-wheel chassis. Whether you are a student building your first robot or a hobbyist exploring embedded systems, this kit provides all the essential components and a clear path to understanding sensor fusion and motor control.
Key Features
- Three HC-SR04 ultrasonic sensors provide wide-angle object detection with a range of 2 cm to 400 cm.
- Multiple operating modes: obstacle following, emergency stop when an object is too close, and a 360° search mode to reacquire a lost target.
- PWM-based speed control lets you adjust the robot's speed through the Arduino IDE.
- Plug-and-play jumper connections mean no soldering is required—just connect and start coding.
- Complete chassis kit includes four BO motors (100–300 RPM, 6V–12V DC) and four wheels for stable movement.
- Powered by a 9V battery (included) via a battery holder and clip connector.
Specifications Explained
The Arduino UNO R3 is the brain of the kit, offering an accessible platform for writing and uploading code. The three HC-SR04 sensors measure distances from 2 cm to 400 cm, giving the robot a reliable sense of its surroundings. The L298N dual H-bridge driver controls the direction and speed of the four BO motors, which are rated for 100–300 RPM at 6V–12V DC. Speed control is achieved through PWM signals from the Arduino. The acrylic or metal chassis provides a sturdy base with a four-wheel mount. A 9V battery powers the system through a battery holder and clip connector, keeping the setup simple and portable. The kit weighs 802 g and ships in a 26 × 18 × 8 cm package.
Compatibility and Requirements
Programming is done through the Arduino IDE, which is freely available for Windows, macOS, and Linux. The kit includes all necessary hardware for assembly, including jumper wires and a screwdriver. A 9V battery is included to power the robot. No additional tools are required for assembly, as all connections are plug-and-play. Note that the robot is not pre-assembled; you will build it yourself, which is part of the learning experience.
Typical Uses
- Learning embedded systems and robotics programming
- Building a first autonomous robot for school projects
- Exploring sensor-based navigation and object tracking
- Hands-on STEM education and hobbyist experimentation
What's in the Box
- 1× Arduino UNO Board with Cable
- 3× HC-SR04 Ultrasonic Sensors
- 1× L298N Motor Driver Module
- 1× Car Chassis Kit (includes 4 wheels and 4 BO motors)
- 1× 9V Battery
- 1× 18650 Battery Holder
- 1× 9V Battery Clip Connector with DC Plug
- 2× Sets of Male-to-Female Jumper Wires
- 1× Set of Male-to-Male Jumper Wires
- 1× Screwdriver and Fastener Set
- 1× User Manual
Quick specs
- Item Type
- Object Following Robot Kit
- Assembled (Y/N)
- N
- Controller
- Arduino UNO R3
- Motor Driver
- L298N Dual H-Bridge Driver
- Sensors details
- 3× HC-SR04 Ultrasonic Sensors (Left, Center, Right)
- Motor Rating
- 4× BO Motors (100–300 RPM, 6V–12V DC)



















