
1 / 2 · Click to enlarge
At a glance
Made by Renke, this vibration/tilt sensor and modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Tilt Sensor Module; power output(v) 5-30V; range X, Z: -180°~180°, Y: -90°~90°.
Key Highlights
- Water-resistant casing
- Model No. / Name: Tilt Sensor Module
- Power output(V): 5-30V
- Range: X, Z: -180°~180°, Y: -90°~90°
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Tilt Sensor Module |
|---|---|
| Power output(V) | 5-30V |
| Range | X, Z: -180°~180°, Y: -90°~90° |
| Resolution | 0.01° |
| Accuracy | X, Y axis: static accuracy ±0.1°, dynamic accuracy ±0.5°, Z axis: static accuracy ±0.5° |
| Protection level | IP65 |
| Cable Length | 60 |
| Output | RS485 |
| Shipping Weight | 0.12 kg |
| Shipping Dimensions | 15 × 15 × 6 cm |
Overview
The Renke RS-DIP-N01-1 Tilt Sensor & Inclinometer -40℃~60℃, 0~95%RH (non-condensing), IP65, (Modbus protocol) (Type RS485), made by Renke, is listed in our vibration/tilt sensor and modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Tilt Sensor Module
- Power output(V): 5-30V
- Range: X, Z: -180°~180°, Y: -90°~90° (quoted range is usually line-of-sight; walls and interference shorten it)
- Resolution: 0.01°
- Accuracy: X, Y axis: static accuracy ±0.1°, dynamic accuracy ±0.5°, Z axis: static accuracy ±0.5°
- Protection level: IP65 (the IP code tells you how much dust and water the casing keeps out)
- Cable Length: 60 (measure your mounting space before ordering)
- Output: RS485
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
For Customization:
Renke RS-DIP-N01-1 Tilt Sensor & Inclinometer -40℃~60℃, 0~95%RH (non-condensing), IP65, (Modbus protocol) (Type RS485), which adopts various installation methods and is suitable for use in different places. Meet the various needs of customers for measurement range, signal and environmental conditions. The tilt sensor adopts standard Modbus protocol RS485 signal output. The housing of the tilt sensor is made of sturdy waterproof material and can work in harsh environments.
Note:Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.
Features:
- Using the Kalman filter algorithm, the accuracy is up to 0.05°
- It has a wide-angle measurement range and good output signal linearity, which can be used in most environments.
- Dual-axis inclinometer for horizontal and vertical mounting
- The overall housing of the tilt sensor is waterproof and corrosion-resistant. Design appearance suitable for harsh environments
- Various technologies including MEMS, fluid-based, and potentiometer designs
- Free cloud platform for data view.
Applications:
- Industrial inclination measurement
- Dangerous building monitoring
- Ancient building protection monitoring
- Bridge tower inclination measurement
- Tunnel monitoring
- Dam monitoring
- Weighing system inclination compensation
- Drilling inclination control
Package Includes:
1 x Renke RS-DIP-N01-1 Tilt Sensor & Inclinometer -40℃~60℃, 0~95%RH (non-condensing), IP65, (Modbus protocol) (Type RS485)Quick specs
- Model No. / Name
- Tilt Sensor Module
- Power output(V)
- 5-30V
- Range
- X, Z: -180°~180°, Y: -90°~90°
- Resolution
- 0.01°
- Accuracy
- X, Y axis: static accuracy ±0.1°, dynamic accuracy ±0.5°, Z axis: static accuracy ±0.5°
- Protection level
- IP65



















