Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Renke, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name Nitrogen Dioxide Sensor; signal output 485. Check that your power source supplies 10 to 30 before connecting it.

Key Highlights

  • Item Type: Sensor
  • Model No. / Name: Nitrogen Dioxide Sensor
  • Signal Output: 485

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Model No. / NameNitrogen Dioxide Sensor
Voltage Rating10 to 30
Signal Output485
Operating Temperature (°C)-20~50
Operating humidity15~90%RH No condensation
Shipping Weight0.165 kg
Shipping Dimensions15 × 15 × 6 cm

Overview

The Renke RS-NO2-N01-2-20P Nitrogen dioxide Sensor -40℃~80℃,20ppm:0.1ppm (Type RS485), made by Renke, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Model No. / Name: Nitrogen Dioxide Sensor
  • Voltage Rating: 10 to 30 (match this to your power supply; too high a voltage can damage the part)
  • Signal Output: 485
  • Operating Temperature (°C): -20~50
  • Operating humidity: 15~90%RH No condensation
  • Shipping Weight: 0.165 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 15 × 15 × 6 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Note: Customize this product to meet your unique requirements—reach out to [email protected] for more information.  
For Customization:
    The nitrogen dioxide transmitter designed by our company adopts the imported first-line brand electrochemical nitric oxide sensor, which has the characteristics of rapid response and strong anti-interference ability. After our company's unique compensation algorithm and multi-stage standard gas calibration, It has long life, high precision, high repeatability and high stability. Suitable for applications where it is necessary to monitor the concentration of nitrogen dioxide leakage. The device adopts wide voltage 10-30V DC power supply, 485 signal output, standard Modbus-RTU communication protocol, ModBus address can be set, baud rate can be changed, communication distance is up to 2000 meters. Note: The actual product may vary in slight variation with the image shown. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. It adopts imported one-line large brand electrochemical sensor, which is stable and durable.
  2. Range 0-20ppm, 0-2000ppm optional, other ranges can also be customized.
  3. High measurement accuracy, up to ±3%FS, repeatability up to ±2%.
  4. 485 communication interface standard ModBus-RTU communication protocol, address, baudrate can be set, the communication distance is up to 2000 meters.
  5. Optional high-quality OLED display, the value can be directly viewed on the spot, and the nightcan be clearly displayed.
  6. On-site power supply adopts 10~30V DC wide voltage power supply, which can adapt tovarious DC power supplies in the field.
  7. The product adopts wall-mounted waterproof case, which is easy to install and has highprotection level and can be applied to harsh environment.

Package Includes:

1 x Renke RS-NO2-N01-2-20P Nitrogen dioxide Sensor -40℃~80℃,20ppm:0.1ppm (Type RS485)

Quick specs

Item Type
Sensor
Model No. / Name
Nitrogen Dioxide Sensor
Voltage Rating
10 to 30
Signal Output
485
Operating Temperature (°C)
-20~50
Operating humidity
15~90%RH No condensation
See all specifications