
1 / 4 · Click to enlarge
AI Summary
The Rtelligent R60S is an open loop stepper driver with an 18-50VDC input range and 1.4-5.6A adjustable output current. It supports PUL+DIR, CW+CCW and QEP pulse modes, making it a flexible choice for compact motion control builds.
Key Highlights
- 18-50VDC wide input range for flexible power supply selection
- Adjustable output current from 1.4A to 5.6A
- Drives open-loop motors below 60mm frame size
- Pulse modes: PUL+DIR, CW+CCW or QEP
- TTL 3.3V serial interface for configuration and control
- Selectable 5V or 24V rated impulse voltage
Ideal For
- CNC builders using compact open-loop stepper motors
- Automation engineers needing adjustable current drive
- Makers building small positioning or robotics projects
- Lab and equipment designers using 18-50VDC supplies
- Technicians integrating PUL+DIR or QEP motion control
Buying Tip
Confirm your motor's rated current and frame size before ordering, then set the R60S output current to match rather than running it at the maximum.
Elecvora expert review
Our verdict
The R60S is a practical open loop driver for compact builds that need a wide DC input range and adjustable current. Its multiple pulse formats and selectable impulse voltage make it adaptable to different controllers.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 18-50VDC input range
- Adjustable 1.4-5.6A output current
- Three pulse command formats supported
- TTL 3.3V serial interface
- Selectable 5V or 24V impulse voltage
Cons
- Open loop only, no closed-loop feedback
- Limited to motors below 60mm frame size
- Package contents not specified
Best for
Compact open-loop motion control builds with 18-50VDC supplies
Not ideal for
Closed-loop or large-frame motor applications
Specifications
| Item Type | stepper driver |
|---|---|
| Output Current (A) | 1.4-5.6A |
| Compatible Motor | Open-loop motor below 60mm |
| Rated Impulse Voltage (V) | 5V or 24V |
| Pulse | PUL+DIR, CW+CCW, or QEP |
| Serial Interfaces | TTL 3.3V |
| Voltage Range (V) | 18-50VDC |
| Shipping Weight | 0.259 kg |
| Shipping Dimensions | 16 × 13 × 6 cm |
Frequently Asked Questions
What voltage supply does the R60S need?
How much current can it deliver?
Which motors can I use with it?
What pulse formats are supported?
What is the impulse voltage setting for?
What is included in the package?
Overview
The Rtelligent R60S is an open loop stepper driver designed for compact motion control systems that need a wide supply range and adjustable current. It accepts 18-50VDC and can be set to deliver between 1.4A and 5.6A to the motor, giving you room to match the driver to different open-loop motors below 60mm frame size.
Pulse input is flexible: the driver accepts PUL+DIR, CW+CCW or QEP command formats, and a TTL 3.3V serial interface is available for configuration or control. The rated impulse voltage can be set to 5V or 24V, so the R60S can work with both logic-level and higher-level signal sources.
Key Features
- Wide voltage range: 18-50VDC input supports a broad choice of power supplies.
- Adjustable current: 1.4-5.6A output range lets you tune drive strength to the motor.
- Multiple pulse modes: PUL+DIR, CW+CCW and QEP command formats.
- Serial interface: TTL 3.3V connection for configuration or control.
- Selectable impulse voltage: 5V or 24V rated impulse voltage.
- Compact format: shipping dimensions of 16 x 13 x 6 cm suit tight enclosures.
Specifications Explained
Voltage and current
The 18-50VDC input range means the driver can run from a variety of DC supplies, so you can choose a voltage that suits your motor and speed requirements. The 1.4-5.6A output current is adjustable, allowing you to set the drive current to match the motor's rating rather than running it at a fixed level.
Pulse and signal options
Support for PUL+DIR, CW+CCW and QEP pulse formats means the R60S can be integrated with different controllers and motion cards without needing a separate converter. The rated impulse voltage of 5V or 24V lets you match the driver to your signal source, and the TTL 3.3V serial interface gives an additional configuration or control path.
Motor compatibility
The R60S is intended for open-loop motors below 60mm frame size. Check your motor's current rating against the 1.4-5.6A output range and confirm that its frame size falls within this limit before pairing.
Compatibility and Requirements
To use the R60S you will need a DC power supply within the 18-50VDC range, an open-loop stepper motor below 60mm frame size, and a controller that can provide one of the supported pulse formats. Signal wiring should match the selected 5V or 24V impulse voltage setting. The driver is not intended for closed-loop motors or motors outside the stated frame size.
Typical Uses
- Compact CNC and engraving motion axes
- Automation and positioning mechanisms
- Small robotics and laboratory equipment
- Packaging and light textile machinery
- Electronic assembly and PCB handling fixtures
What's in the Box
Package contents are not specified for this listing. Please confirm the included items with the product documentation before ordering.
Quick specs
- Item Type
- stepper driver
- Output Current (A)
- 1.4-5.6A
- Compatible Motor
- Open-loop motor below 60mm
- Rated Impulse Voltage (V)
- 5V or 24V
- Pulse
- PUL+DIR, CW+CCW, or QEP
- Serial Interfaces
- TTL 3.3V



















