
1 / 3 · Click to enlarge
AI Summary
The Rtelligent T60S is a closed loop stepper driver that runs from 18 to 50V DC and supplies up to 6000mA. It reduces low-speed resonance while adding rotation detection and phase alarms for more reliable positioning.
Key Highlights
- 18-50V DC input range with 6000mA maximum output current
- Closed loop control reduces low-speed resonance and missed steps
- Selectable PUL+DIR or CW+CCW pulse modes via DIP switches
- Non-inductive rotation detection with phase alarm output
- Over-voltage, over-current and short-circuit protection built in
- Compact housing suited to CNC, 3D printing and automation builds
Ideal For
- CNC router and engraving machine builders
- 3D printer upgrades using closed loop motors
- Automation and robotics integrators
- Laboratory and medical motion system designers
- Packaging and textile machine technicians
Buying Tip
Check that your motor is a closed loop type below 60mm and confirm your controller outputs PUL+DIR or CW+CCW before ordering, then set the DIP switches to match.
Elecvora expert review
Our verdict
The T60S is a sensible step up from open loop driving for anyone working with closed loop motors below 60mm. Its wide voltage window, 6000mA output and switch-selectable pulse modes make it adaptable without adding complexity.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Broad 18-50V DC input range
- Up to 6000mA output current
- Selectable PUL+DIR or CW+CCW modes
- Reduced low-speed resonance and phase alarm support
- Built-in over-voltage, over-current and short-circuit protection
Cons
- Requires a separate DC power supply
- Only suits closed loop motors below 60mm
- Current and mode settings rely on DIP switches rather than software
Best for
Closed loop motion builds in CNC, 3D printing and automation
Not ideal for
Open loop motors or high-voltage industrial servo systems
Specifications
| Item Type | stepper driver |
|---|---|
| Output Current (A) | 6000mA |
| Compatible Motor | Closed loop motor below 60mm |
| Pulse | PUL+DIR or CW+CCW (DIP setting) |
| Voltage Range (V) | 18~50 DC |
| Shipping Weight | 0.246 kg |
| Shipping Dimensions | 16 × 11 × 6 cm |
What's in the box
- 1 x Rtelligent T60S closed loop stepper driver
Frequently Asked Questions
What motor types does the T60S work with?
What power supply do I need?
How do I choose between PUL+DIR and CW+CCW?
Does it protect against wiring faults?
What is included with the driver?
How should I set the output current?
Overview
The Rtelligent T60S is a closed loop stepper driver designed to improve on the behaviour of conventional open loop drives. By combining a new architecture with a revised control algorithm, it reduces the low-speed resonance amplitude that often causes noisy or rough motion, and it strengthens resistance to electrical interference. The result is a driver that holds position more consistently across the speed range.
It is intended for builders and machine integrators who already use closed loop stepper motors below 60mm and want a compact driver that is straightforward to configure.
Key Features
- Wide voltage range: operates from an 18 to 50V DC supply.
- High current capability: adjustable output current up to 6000mA.
- Flexible pulse input: DIP switches select PUL+DIR or CW+CCW command format.
- Rotation detection: non-inductive detection supports phase alarm reporting.
- Protection circuitry: guards against over-voltage, over-current and short circuits.
- Compact layout: a space-saving design that fits dense control cabinets.
Specifications Explained
Voltage and current
The 18 to 50V DC input range gives you room to match the driver to the supply you already have, while the 6000mA maximum output current covers the higher-current closed loop motors used in small and medium machines. Set the current to suit your motor rather than leaving it at maximum.
Pulse modes
PUL+DIR is the common step-and-direction format used by most motion controllers. CW+CCW sends separate pulses for each rotation direction. Both are selectable with the onboard DIP switches, so you can match the driver to your controller without extra hardware.
Closed loop behaviour
Closed loop control means the driver responds to what the motor is actually doing, not only to the commands it sends. This is what reduces low-speed resonance and allows phase alarm reporting when something is wrong.
Compatibility and Requirements
The T60S is specified for closed loop motors below 60mm and is described as compatible with NEMA 17 and NEMA 23 stepper motors. It requires a DC power supply within the 18 to 50V range and a controller that outputs step-and-direction or CW/CCW pulses. Motor current must be set within the 6000mA maximum.
Typical Uses
- CNC milling, engraving and cutting machines
- 3D printers needing accurate layer positioning
- Robotics and factory automation equipment
- Diagnostic and laboratory motion systems
- Packaging machinery and textile equipment
- PCB drilling and soldering automation
What's in the Box
1 x Rtelligent T60S closed loop stepper driver.

Quick specs
- Item Type
- stepper driver
- Output Current (A)
- 6000mA
- Compatible Motor
- Closed loop motor below 60mm
- Pulse
- PUL+DIR or CW+CCW (DIP setting)
- Voltage Range (V)
- 18~50 DC
- Shipping Weight
- 0.246 kg



















