
1 / 3 · Click to enlarge
AI Summary
A 5V radio-controlled dual relay module that switches loads up to 10A at 125VAC or 7A at 240VAC from a spare receiver channel. Two independent channels, screw terminals and status LEDs make it a practical switch for RC lighting, glow plugs and small motor circuits.
Key Highlights
- Dual independent channels for separate or mixed motor control
- Switches up to 10A at 125VAC and 7A at 240VAC
- 4.8 to 5.8 VDC operating voltage with a 5V trigger
- Wear-resistant screw terminals for simple load wiring
- Three LEDs indicate power and relay on/off status
- Compact 50 x 45 mm board weighing 32 g
Ideal For
- RC aircraft builders adding high-power lighting circuits
- Nitro RC car and boat owners controlling glow plugs
- RC combat and BattleBot builders needing auxiliary switching
- Makers adding relay control to home automation projects
- Hobbyists driving two small brushed motors from one receiver channel pair
Buying Tip
Check the inrush current of your motor or lamp against the 10A at 125VAC and 7A at 240VAC contact ratings before wiring the load.
Elecvora expert review
Our verdict
A tidy, well-sized dual relay board that gives RC builders isolated switching without extra electronics knowledge. Its 10A rating and dual channels cover most auxiliary lighting, glow plug and small motor jobs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two independent channels in one compact board
- Clear AC contact ratings for 125V and 240V loads
- Screw terminals simplify load wiring
- Status LEDs make troubleshooting easy
- Full electrical isolation from receiver electronics
Cons
- Requires a regulated 4.8 to 5.8 VDC supply
- Load current must stay within the AC contact ratings
- No documented DC load rating is provided
Best for
RC builders switching lights, glow plugs or small brushed motors
Not ideal for
High-current DC loads or precision motor speed control
Specifications
| Operating Voltage (VDC) | 4.8 ~ 5.8 |
|---|---|
| Trigger Voltage (VDC) | 5 |
| Switching Voltage (VAC) | 240@7A, 125@10A |
| Operating Temperature (°C) | -40 to 85 |
| Storage Temperature (°C) | -40 to 80 |
| Length (mm) | 50 |
| Width (mm) | 45 |
| Weight (g) | 32 |
| Resistance(mΩ) | 100 |
| Shipping Weight | 0.037 kg |
| Shipping Dimensions | 6 × 5 × 3 cm |
What's in the box
- 1 x SmartElex Dual Channel Battle Relay
Frequently Asked Questions
What voltage does the relay board need?
How much current can it switch?
Can I control two motors separately?
How do I connect the load?
Does it show when the relay is on?
What is included with the relay?
Overview
The SmartElex Dual Channel Battle Relay is a radio-controlled switch board for builders who need to turn a load on and off from a transmitter stick or switch. It accepts a 4.8 to 5.8 VDC supply, triggers at 5V, and provides two relay channels that can be used separately or mixed. Because the relay contacts are electrically isolated from the receiver side, you can switch mains-level equipment without exposing your radio electronics to the load circuit.
Key Features
- Two channels: drive two brushed motors independently or in a mixed configuration.
- High switching capacity: rated for 10A at 125VAC and 7A at 240VAC at room temperature.
- Low relay resistance: 100 mΩ maximum, with a typical receiver draw of about 40mA.
- Simple wiring: wear-resistant screw terminals for the load connections.
- Clear status: a power LED plus two status LEDs show when each relay is active.
- Wide temperature range: operates from -40 to 85 °C and stores from -40 to 80 °C.
Specifications Explained
The 4.8 to 5.8 VDC operating range matches a standard receiver pack or BEC output, and the 5V trigger threshold means the board responds to normal receiver signal levels. The 10A at 125VAC and 7A at 240VAC contact ratings describe the maximum load the relay can switch at room temperature; keep your load within these limits and allow for inrush current on motors and lamps. The 100 mΩ contact resistance keeps losses low at moderate currents. At 50 mm long, 45 mm wide and 32 g, the board is small enough for tight airframes and chassis.
Compatibility and Requirements
The module needs a 4.8 to 5.8 VDC supply and a spare receiver channel for control. Loads are connected through the screw terminals and must stay within the stated AC ratings. The relay provides electrical isolation between the receiver side and the switched load, so no microcontroller logic-level knowledge is required.
Typical Uses
- Glow plug control in nitro RC vehicles
- Auxiliary weapon or mechanism control in RC combat models
- High-power lighting on large RC aircraft, boats and cars
- Domestic appliance and home automation switching
- Non-critical automotive electronics such as glow wire circuits
What's in the Box
1 x SmartElex Dual Channel Battle Relay.

Quick specs
- Operating Voltage (VDC)
- 4.8 ~ 5.8
- Trigger Voltage (VDC)
- 5
- Switching Voltage (VAC)
- 240@7A, 125@10A
- Operating Temperature (°C)
- -40 to 85
- Storage Temperature (°C)
- -40 to 80
- Length (mm)
- 50




















