
1 / 4 · Click to enlarge
AI Summary
The SmartElex 15D is a dual-channel DC motor driver that handles up to 13A continuous and 30A peak per channel. It works with 6.8-30V motors and accepts 3V or 5V PWM signals from microcontrollers.
Key Highlights
- Dual-channel driver for two brushed DC motors
- 13A continuous, 30A peak current per channel
- Wide 6.8V to 30V motor supply range
- Accepts 3V and 5V logic level PWM inputs
- Over-current and thermal protection built in
- Compact 75 x 63 x 15 mm board weighs 30g
Ideal For
- Robotics hobbyists building differential-drive robots
- Arduino and MCU users needing dual motor control
- Mechatronics students prototyping motion systems
- RC car and rover builders using brushed motors
Buying Tip
Check that your motor's continuous current draw per channel stays below 13A and that your motor supply voltage falls within 6.8V to 30V for reliable operation.
Elecvora expert review
Our verdict
The SmartElex 15D offers a practical balance of current capacity, voltage range, and protection features for dual-motor projects. It is a solid choice for intermediate builders who need reliable bidirectional control without advanced complexity.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dual channels simplify wiring for two-motor robots
- Wide 6.8-30V range supports many battery types
- Built-in over-current and thermal protection
- Accepts 3V and 5V logic directly
Cons
- Requires a separate motor power supply
- Not a shield, so wiring is needed for connections
- No cooling fan, so continuous high-current use may require airflow
Best for
Robotics and mechatronics projects with two brushed DC motors
Not ideal for
Users needing a plug-and-play Arduino shield or higher continuous current per channel
Specifications
| Model No. / Name | Motor Driver |
|---|---|
| No. of Channels | 2 |
| Continuous Discharge Current (A) | 13 |
| Voltage Rating (V) | 6.8 to 30 |
| Peak Current (A) | 30 |
| Over-Current Protection (A) | Yes |
| Thermal Protection (Y/N) | Yes |
| LED Indicator | Yes |
| Cooling Fan | No |
| Arduino Shield (Y/N) | No- can be used with Wire connection |
| Dimensions (L x W x H) mm | 75 x 63 x 15 |
| Weight (g) | 30 |
| Shipping Weight | 0.033 kg |
| Shipping Dimensions | 6 × 4 × 1 cm |
What's in the box
- 1 x SmartElex 15D Dual Channel DC Motor Driver
- 1 x Connection cable
Frequently Asked Questions
What is the maximum continuous current per channel?
What motor voltage range does this driver support?
Can I use this driver with a 3.3V microcontroller?
Is this an Arduino shield?
What protection features are included?
What is included in the package?
Overview
The SmartElex 15D Dual Channel DC Motor Driver is a compact board for controlling two brushed DC motors in bidirectional mode. It is intended for builders who need a straightforward interface between a microcontroller and medium-power motors. The board accepts a motor supply from 6.8V to 30V and delivers up to 13A continuous current per channel, with a 30A peak rating for short bursts. Control is via TTL PWM and direction signals, compatible with 3V and 5V logic. On-board protection includes over-current limiting, thermal shutdown, and under-voltage lockout, while LED indicators show status. The module measures 75 x 63 x 15 mm and weighs 30g, making it easy to mount on robotic platforms and custom chassis.
Key Features
- Two independent channels for driving two brushed DC motors
- Bidirectional control with PWM speed regulation
- 13A continuous current per channel, 30A peak
- Wide 6.8V to 30V motor voltage range
- 3V and 5V logic level inputs for MCU compatibility
- Over-current protection and thermal shutdown
- Under-voltage lockout prevents erratic operation
- LED indicators for power and status
Specifications Explained
Current ratings: The 13A continuous rating indicates the current each channel can handle for extended periods, while the 30A peak allows short bursts for acceleration or stall conditions. Always ensure your motor's typical current draw stays within the continuous limit for reliable operation.
Voltage range: The 6.8V to 30V input accepts a broad range of battery packs and power supplies, from small 2S LiPo setups to 24V industrial supplies.
Logic compatibility: The driver accepts PWM and direction signals from 3V or 5V microcontrollers, so it can connect directly to most Arduino boards and other MCUs without level shifting.
Protection features: Over-current limiting, thermal shutdown, and under-voltage lockout help prevent damage from overloads, overheating, or low battery voltage. LED indicators provide visual feedback during operation.
Compatibility and Requirements
The board is designed for use with microcontrollers that output TTL PWM and direction signals at 3V or 5V logic levels. It is not an Arduino shield, so connections are made via wires to the input pins. A separate motor power supply within the 6.8V to 30V range is required; the logic supply is taken from the microcontroller. The package includes a connection cable to help with wiring.
Typical Uses
This driver is well suited to robotics projects such as differential-drive robots, automated guided vehicles, and remote-controlled cars. It can also be used in mechatronics prototypes, conveyor systems, and any application requiring precise bidirectional control of two brushed DC motors.
What's in the Box
- 1 x SmartElex 15D Dual Channel DC Motor Driver
- 1 x Connection cable



Quick specs
- Model No. / Name
- Motor Driver
- No. of Channels
- 2
- Continuous Discharge Current (A)
- 13
- Voltage Rating (V)
- 6.8 to 30
- Peak Current (A)
- 30
- Over-Current Protection (A)
- Yes
Frequently Bought Together

Arduino Uno R3 with Cable
$9.99
Uno R3 Board without Cable compatible with Arduino
$9.99
SmartElex Aryabhatta 8051 Microcontroller Development Board AT89S52 with Onboard USB Programmer
$12.99
Male To Female Jumper Wires 40 Pcs 10cm
$5.99
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
$7.99
SmartElex 15S DC Motor Driver 15A (30A Peak) (Single Motor, PWM)
$10.99


















