Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A single-motor brushed DC driver board rated for 15A continuous and 30A peak, with a wide 6.8-30 VDC supply range. It gives you bidirectional PWM speed and direction control from a 3.3V or 5V microcontroller.

Key Highlights

  • 15A continuous output with 30A peak for 10 seconds
  • Wide 6.8-30 VDC motor supply range
  • Bidirectional control of one brushed DC motor
  • 20 kHz PWM frequency with TTL PWM input
  • Internal thermal shutdown and under-voltage lockout
  • Compact 67 x 43 x 15 mm board weighing 24 g

Ideal For

  • Robotics builders driving a single brushed DC motor
  • Mechatronics students and makers learning motor control
  • Automation and prototype projects needing PWM speed control
  • Hobbyists upgrading from low-current driver modules

Buying Tip

Check that your motor's supply voltage sits within 6.8 to 30 VDC and that its running current stays under 15A before choosing this board.

Elecvora expert review

Our verdict

The SmartElex 15S packs a useful current rating and a wide voltage window into a very small board, making it a practical choice for single-motor projects. Its protection features and logic-level inputs keep integration simple for most microcontroller builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 15A continuous and 30A peak for 10 seconds
  • Wide 6.8-30 VDC supply range
  • 3.3V and 5V logic level inputs
  • Thermal shutdown, under-voltage lockout and current limiting

Cons

  • Controls only one motor per board
  • Requires an external motor power supply
  • No heat sink included for sustained high-current use

Best for

Single brushed DC motor projects needing compact, protected PWM control

Not ideal for

Multi-motor drivetrains or motors running well above 15A continuously

Specifications

Model No. / NameMotor Driver
Continuous Discharge Current (A)15
Supply Voltage6.8-30 VDC.
PWM Frequency Range (KHz)20 KHz.
Peak Current (A)30 Amp(For 10 Seconds).
Dimensions (L x W x H) mm67 x 43 x 15 mm
Weight (g)24
Shipping Weight0.027 kg
Shipping Dimensions8 × 5 × 4 cm

What's in the box

  • 1 x SmartElex 15S DC Motor Driver 15A (30A Peak) (Single Motor, PWM)
  • 1 x Connection Cable

Frequently Asked Questions

How many motors can this driver control?
It controls one brushed DC motor with bidirectional speed and direction control.
What supply voltage does it need?
The motor supply must be between 6.8 and 30 VDC.
Can I use it with a 3.3V microcontroller?
Yes, the board accepts 3.3V and 5V logic level inputs and TTL PWM signals.
What is the peak current rating?
It handles 30A peak for up to 10 seconds, with 15A continuous.
What comes in the package?
You receive one SmartElex 15S DC Motor Driver board and one connection cable.
Does it protect against overheating?
Yes, it includes internal thermal shutdown, under-voltage lockout and current limiting at 35A.

Overview

The SmartElex 15S is a single-channel brushed DC motor driver board designed for projects that need solid current handling without a large controller. It drives one brushed DC motor in both directions using PWM and direction signals from a microcontroller, and it accepts a motor supply from 6.8 to 30 VDC. With 15A continuous and 30A peak for 10 seconds, it suits builds where a small driver board would otherwise be the weak point.

Key Features

  • High current capacity: 15A continuous and 30A peak for 10 seconds.
  • Wide voltage range: operates from a 6.8 to 30 VDC motor supply.
  • Bidirectional control: PWM and direction inputs drive one brushed DC motor forward and reverse.
  • Microcontroller friendly: accepts TTL PWM and 3.3V or 5V logic level inputs.
  • Built-in protection: internal thermal shutdown, under-voltage lockout and current limiting at 35A.
  • Compact footprint: 67 x 43 x 15 mm and 24 g.

Specifications Explained

The continuous current rating of 15A tells you what the board can deliver for sustained running, while the 30A peak rating covers short bursts of up to 10 seconds, such as a motor starting under load. The 6.8 to 30 VDC supply range lets you match the driver to a broad set of brushed motors and battery packs within that window. A 20 kHz PWM frequency keeps motor control smooth and above the audible range for most listeners. Current limiting at 35A and internal thermal shutdown help protect the board when a motor draws more than expected, and under-voltage lockout prevents erratic behaviour when the supply sags.

Compatibility and Requirements

The board works with TTL PWM from a microcontroller and accepts 3.3V and 5V logic level inputs, so it pairs with common 3.3V and 5V controller boards. It drives a single brushed DC motor and needs an external motor power supply within the 6.8 to 30 VDC range. Plan your wiring so the motor supply and logic signals are connected correctly before powering up.

Typical Uses

This driver fits robotics platforms, mechatronics coursework, automation prototypes, and any project where one brushed DC motor needs variable speed and direction control from a microcontroller. Its compact size and 24 g weight make it easy to mount on small chassis and custom frames.

What's in the Box

  • 1 x SmartElex 15S DC Motor Driver 15A (30A Peak) (Single Motor, PWM)
  • 1 x Connection Cable
SmartElex 15S DC Motor Driver 15A (30A Peak) Pin Map

Quick specs

Model No. / Name
Motor Driver
Continuous Discharge Current (A)
15
Supply Voltage
6.8-30 VDC.
PWM Frequency Range (KHz)
20 KHz.
Peak Current (A)
30 Amp(For 10 Seconds).
Dimensions (L x W x H) mm
67 x 43 x 15 mm
See all specifications