Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A ready-to-use breakout board for the Ebyte E73-2G4M04S1AX BLE module, based on the nRF52810 chip with Cortex-M4 core. It offers BLE 4.2/5.0/5.2 support, wide IO access, and includes a UFL antenna and headers for quick prototyping.

Key Highlights

  • Based on Nordic nRF52810 with ARM Cortex-M4 core
  • Supports BLE 4.2, 5.0 and 5.2 protocols
  • Operating voltage range 1.8 V to 3.6 V
  • Frequency range 2379 to 2496 MHz
  • Tx power up to 4.1 dBm, sensitivity -94 to -96 dBm
  • Includes UFL antenna and two male headers

Ideal For

  • Embedded developers building BLE prototypes
  • IoT product designers needing a compact SoC module
  • Makers experimenting with nRF52 series
  • Students learning Bluetooth Low Energy
  • Engineers creating wireless sensor nodes

Buying Tip

Remember that this is a bare SoC module requiring firmware development; pair it with a Nordic-compatible programmer and SDK before purchasing.

Elecvora expert review

Our verdict

This breakout board is a solid choice for developers who want to prototype with the nRF52810 without designing a custom PCB. It provides easy access to the module's pins and includes the necessary antenna and headers, though it demands firmware expertise.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact breakout with almost all IO exposed
  • Includes UFL antenna and headers
  • Wide operating voltage and industrial temperature range
  • Based on a reliable Nordic SoC with BLE 5.x support

Cons

  • Requires external programmer and firmware development
  • No on-board voltage regulator or level shifting
  • Limited documentation compared to official Nordic development kits

Best for

Embedded engineers and makers with BLE experience

Not ideal for

Beginners looking for a plug-and-play Bluetooth serial module

Specifications

Item TypeBreakout Board
Operating Voltage (V)1.8 to 3.6
Frequency Rating2379 to 2496MHz
Communication Level3
Operating Temperature (°C)-40 ~+ 85
Tx power3.8~4.1 dBm(Max)
Receiving Sensitivity-94~-96 dBm
Shipping Weight0.03 kg
Shipping Dimensions10 × 5 × 2 cm

What's in the box

  • 1 x SmartElex E73-2G4M04S1AX Ebyte BLE 4.2/5.0/5.2 Breakout Board
  • 1 x UFL Antenna
  • 2 x Male Headers

Frequently Asked Questions

What is the difference between this board and a standard Bluetooth module?
This is a breakout board for a bare SoC module (nRF52810). It does not come with firmware or a serial-to-BLE bridge; you must develop and flash your own application.
Can I power it from a 5 V source?
No, the operating voltage is 1.8 V to 3.6 V. Applying 5 V will damage the module. Use a 3.3 V supply for best performance.
What is included in the package?
The package includes the breakout board, one UFL antenna, and two male headers.
Do I need a programmer to use this board?
Yes, you need a compatible SWD programmer (such as J-Link or nRF52 DK) to flash firmware. The board does not have a built-in USB or programmer.
What development environment should I use?
You can use Nordic's nRF5 SDK or nRF Connect SDK with Segger Embedded Studio or GCC. The nRF52810 is supported by these tools.
Can I use an external antenna?
Yes, the board has a UFL connector. You can disconnect the included antenna and attach a different 2.4 GHz antenna if needed.

Overview

The SmartElex E73-2G4M04S1AX is a breakout board that carries the Ebyte E73-2G4M04S1AX Bluetooth module. The module is built around Nordic Semiconductor's nRF52810 SoC, which combines a high-performance ARM Cortex-M4 processor with a 2.4 GHz transceiver and support for BLE 4.2, 5.0 and 5.2. This breakout exposes nearly all of the module's IO pins and adds a UFL antenna connector plus two male headers, so you can integrate it into a breadboard or custom PCB with minimal effort.

Key Features

  • Nordic nRF52810 inside: Cortex-M4 core with 192 KB flash and 24 KB RAM for application code.
  • Multi-protocol BLE: Works with BLE 4.2, 5.0 and 5.2 standards.
  • Flexible power: Accepts 1.8 V to 3.6 V; for best performance, use 3.3 V or slightly higher within the range.
  • Industrial temperature range: Operates from -40 °C to +85 °C.
  • Adjustable Tx power: Maximum 4.1 dBm, software-adjustable in multiple steps.
  • Good receive sensitivity: -94 to -96 dBm for reliable reception.
  • Rich peripherals: UART, I2C, SPI, ADC, DMA, PWM and more are available on the module.
  • Antenna flexibility: UFL connector allows use of the included antenna or an external one.

Specifications Explained

Operating voltage (1.8–3.6 V): This wide range lets you power the board from common 3.3 V rails or single-cell batteries, but note that performance is best when supplied with at least 3.3 V.

Frequency (2379–2496 MHz): Covers the global 2.4 GHz ISM band, so the board can be used in most regions without a license.

Tx power (3.8–4.1 dBm max): Roughly 2.5 mW, sufficient for short-range links; the power is adjustable via software to balance range and consumption.

Receiving sensitivity (-94 to -96 dBm): Indicates how weak a signal can be while still being decoded, which helps maintain a stable connection at range.

Communication level (3): The IO pins operate at 3 V logic, so ensure your host microcontroller uses compatible levels.

Compatibility and Requirements

The board is a pure hardware SoC module; it does not include firmware. You must program it with your own application using Nordic's development tools and the nRF52810 SDK. It is not a drop-in replacement for serial-to-Bluetooth modules and requires embedded development knowledge. The UFL antenna and headers are included, but you will need to solder the headers if you want to use them in a breadboard.

Typical Uses

  • Wireless sensor nodes and IoT endpoints
  • BLE beacons and proximity tags
  • Wearable prototypes
  • Remote controls and HID devices
  • Educational projects and RF experimentation

What's in the Box

  • 1 x SmartElex E73-2G4M04S1AX Ebyte BLE 4.2/5.0/5.2 Breakout Board
  • 1 x UFL Antenna
  • 2 x Male Headers

Quick specs

Item Type
Breakout Board
Operating Voltage (V)
1.8 to 3.6
Frequency Rating
2379 to 2496MHz
Communication Level
3
Operating Temperature (°C)
-40 ~+ 85
Tx power
3.8~4.1 dBm(Max)
See all specifications