Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SmartElex, this smartelex bluetooth modules is a good fit for makers, students and electronics hobbyists. Main specs: supply voltage 1.1-3.6; gpio 4; uart 3.3V. Check that your power source supplies 1.1-3.6 before connecting it.

Key Highlights

  • Supply Voltage: 1.1-3.6
  • GPIO: 4
  • UART: 3.3V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Supply Voltage1.1-3.6
GPIO4
UART3.3V
Length (mm)25
Shipping Weight0.03 kg
Shipping Dimensions10 × 5 × 2 cm

Overview

The SmartElex NanoBeacon Board - IN100, made by SmartElex, is listed in our smartelex bluetooth modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Supply Voltage: 1.1-3.6 (match this to your power supply; too high a voltage can damage the part)
  • GPIO: 4
  • UART: 3.3V
  • Length (mm): 25 (measure your mounting space before ordering)
  • Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 5 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SmartElex IN100 NanoBeacon Board offers a 2.4 GHz wireless low-energy BT beacon breakout with exceptionally low power consumption features and minimal programming required. The board features the IN100 NanoBeacon™ from InPlay™ that is compliant with several standard 2.4 GHz protocols and has several built-in configurable features for device behavior that can drastically reduce power consumption allowing for continuous operation in the field for multiple years even with a connected device. This board is a great option for wireless sensor monitoring, asset tracking, retail beacons or even making your own beacon tag for real-time location monitoring. The IN100 can be powered by a single 3V coin cell battery so we've added a 12mm coin cell battery holder (CR1225 battery not included) to power the board. We've added a JSTSH connector to allow for easy integration into our ever-expanding  ecosystem. One side of the board breaks out the UART interface to a 0.1"-spaced through-hole header to connect a Serial Basic for serial communication. The other side breaks out four of the IN100's GPIO pins (4-7) as well as the two I/O power switch pins (SW0 and SW1). Lastly, we've included a "Notes" space on the back of the board for you to write any notes or labels to differentiate between different NanoBeacon boards at a glance. This version is designed for applications requiring a rapid implementation with minimal assembly and modification. It includes male headers soldered to the 0.1"-spaced through-hole pins on the board and does not include the power LED or reset button as expected applications most likely will not need those two components. Users looking for a prototyping option for development on the IN100 before integrating it into a production environment may want to consider getting the SmartElex NanoBeacon Board - IN100. The InPlay NanoBeacon Config Tool allows for software-free programming of the IN100. This tool provides a graphical user interface (GUI) to select settings and configure the module removing any need to perform any tricky programming for advertising and pairing to send and receive data packets. Note:- When programming the IN100 with the InPlay NanoBeacon Config Tool, the "Burn/Program" option uploads the settings and locks the module. Before selecting this option make sure everything is set up and working as you intend as you cannot undo this step and you may brick your IN100. The Config Tool offers a testing "Run in RAM" mode for many settings but I2C is not available in the RAM testing mode. Users connecting I2C devices to the board should ensure their code works before clicking the "Burn/Program" button.

Features: 

  • Model: NanoBeacon Board – IN100
  • Supply Voltage Range: 1.1-3.6V
  • Ultra Low Power: < 650nA
  • GPIO: 4

Package Includes: 

1 x SmartElex NanoBeacon Board - IN100 2 x Male Headers

Quick specs

Supply Voltage
1.1-3.6
GPIO
4
UART
3.3V
Length (mm)
25
Shipping Weight
0.03 kg
Shipping Dimensions
10 × 5 × 2 cm
See all specifications