Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SmartElex MAX-M10S breakout packs a u-blox GNSS receiver with SMA antenna input and backup battery into a tiny board. Its ultra-low power draw and fast hot-start make it ideal for compact, battery-powered tracking projects.

Key Highlights

  • u-blox MAX-M10S receiver with GPS, GLONASS, BeiDou, and Galileo support
  • Ultra-low power consumption for battery-operated designs
  • SMA connector for external antenna connection
  • Onboard rechargeable battery for RTC and orbit data backup
  • 1.5 m horizontal accuracy and 10 Hz max update rate
  • 0.1-inch pin spacing for breadboard compatibility

Ideal For

  • Makers building battery-powered asset trackers
  • Wearable device developers needing compact GNSS
  • IoT projects requiring low-power positioning
  • Students learning GNSS with breadboard-friendly hardware
  • Engineers prototyping multi-constellation receivers

Buying Tip

Check that your project can supply 3.3 V logic and that you have an appropriate external antenna for the SMA connector, as the board does not include one.

Elecvora expert review

Our verdict

The SmartElex MAX-M10S breakout delivers a capable multi-constellation GNSS receiver in a tiny, low-power package with useful extras like an SMA connector and backup battery. It is a solid choice for compact tracking projects where space and power are limited.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports four major GNSS constellations
  • Ultra-low power consumption suits battery operation
  • Onboard backup battery enables fast hot starts
  • Breadboard-friendly pin spacing
  • Flexible UART and I2C interfaces

Cons

  • Requires an external antenna for best performance
  • 3.3 V logic only, so level shifting may be needed for 5 V systems
  • I2C address is fixed at 0x42 unless reconfigured, requiring a multiplexer for multiple boards

Best for

Compact, battery-powered GNSS tracking and wearable projects

Not ideal for

Applications needing 5 V logic compatibility without level shifting

Specifications

Maximum Altitude (m)80,000m
Max Velocity500m/s
Velocity Accuracy0.05m/s
Heading accuracy0.3 degrees
Time Pulse Accuracy30ns
Shipping Weight0.03 kg
Shipping Dimensions10 × 5 × 2 cm

What's in the box

  • 1 x SmartElex u-blox GNSS MAX-M10S board
  • 3 x Male headers
  • 1 x Connector

Frequently Asked Questions

What is the power supply requirement for this board?
The board requires 3.3 V for both VCC and I/O. Current consumption varies with the active constellations and tracking state.
Can I use this board with a 5 V microcontroller?
No, the I/O is 3.3 V only. You will need level shifters to safely connect it to a 5 V microcontroller.
Does the package include an antenna?
No, an antenna is not included. The board has an SMA connector for attaching an external GNSS antenna.
How long does the backup battery last?
The onboard rechargeable battery maintains the real-time clock and GNSS orbit data for up to five hours without main power.
Can I connect multiple boards to the same I2C bus?
The I2C address is 0x42 by default and is software configurable. To use multiple boards with the same address on one bus, you need an external multiplexer.
What software can I use to configure the module?
You can use the u-center Windows application to configure baud rates, update rates, and other settings over the serial interface.

Overview

The SmartElex u-blox GNSS MAX-M10S is a compact breakout board that brings the u-blox MAX-M10S receiver to your breadboard-friendly projects. It is engineered for applications where every milliwatt and every millimeter counts, such as asset trackers and wearable devices. The board receives signals from GPS, GLONASS, BeiDou, and Galileo constellations, and u-blox Super-S technology helps maintain RF sensitivity even with small antennas or in non-line-of-sight conditions.

Key Features

  • Multi-constellation support: GPS, GLONASS, BeiDou, and Galileo for reliable positioning.
  • Low power: Designed for continuous tracking in battery-powered devices.
  • SMA antenna connector: Secure attachment for an external GNSS antenna.
  • Backup battery: Onboard rechargeable cell maintains RTC and orbit data for up to five hours without main power.
  • Flexible interfacing: NMEA and UBX protocols over UART or I2C.
  • Breadboard ready: 0.1-inch-spaced pins and industry-standard UART grouping.

Specifications Explained

1.5 m horizontal accuracy gives you dependable position fixes for most tracking and navigation tasks. The 10 Hz maximum update rate means the module can report position up to ten times per second, which is useful for dynamic platforms. Velocity accuracy of 0.05 m/s and heading accuracy of 0.3 degrees support motion-aware applications. The time pulse accuracy of 30 ns provides a precise timing reference. With a maximum altitude of 80,000 m and maximum velocity of 500 m/s, the receiver is suitable for high-dynamic platforms. Power input is 3.3 V for both VCC and I/O, with current consumption varying with constellation and tracking state.

Compatibility and Requirements

The board communicates over I2C or UART using NMEA and UBX protocols. The I2C address is 0x42 and is software configurable; if you need multiple boards on the same bus, an external multiplexer is required. Configuration can be performed with the u-center Windows software. The 3.3 V logic level means you should ensure your host microcontroller uses 3.3 V I/O or level shifting. An external antenna connects via the SMA connector.

Typical Uses

This breakout is well suited to asset tracking, wearable devices, and other compact battery-powered projects that need GNSS positioning. Its small size and low power draw also make it a good fit for portable data loggers and custom IoT trackers.

What's in the Box

  • 1 x SmartElex u-blox GNSS MAX-M10S board
  • 3 x Male headers
  • 1 x Connector

Quick specs

Maximum Altitude (m)
80,000m
Max Velocity
500m/s
Velocity Accuracy
0.05m/s
Heading accuracy
0.3 degrees
Time Pulse Accuracy
30ns
Shipping Weight
0.03 kg
See all specifications