Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact Bluetooth 5.0 SMD-22 module rated for 2400–2483.5 MHz with up to 10 dBm transmit power and 80–150 m open-air range. Its GPIO, PWM, SPI, ADC and I2S interfaces make it a flexible building block for smart lighting and short-range wireless projects.

Key Highlights

  • Bluetooth 5.0 module in a compact 24 x 16 x 3 mm SMD-22 package
  • 2400 to 2483.5 MHz operation with up to 10 dBm transmit power
  • -93 dBm receive sensitivity and 80–150 m open line-of-sight range
  • GPIO, PWM, SPI, ADC and I2S interfaces for flexible project integration
  • Rated for -40 to 85 °C operating temperature in enclosed builds
  • Supports mesh-style networking for multi-device lighting setups

Ideal For

  • Embedded developers building Bluetooth smart lighting controllers
  • Makers prototyping mesh-style multi-node wireless projects
  • Lighting designers integrating dimming into compact fixtures
  • Hardware engineers needing a small SMD-22 radio module with PWM and ADC
  • Students learning Bluetooth 5.0 module integration and secondary development

Buying Tip

Check that your PCB and host firmware support the SMD-22 footprint and the GPIO, PWM, SPI, ADC or I2S lines you plan to use before ordering, since this is a surface-mount module rather than a plug-and-play board.

Elecvora expert review

Our verdict

The SmartElex TB-03F packs Bluetooth 5.0, mesh-style networking and a useful set of interfaces into a very small SMD-22 package. It suits lighting and short-range control designs where the board is already planned around surface-mount assembly.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 24 x 16 x 3 mm SMD-22 footprint
  • Broad interface set: GPIO, PWM, SPI, ADC and I2S
  • Up to 10 dBm transmit power with 80–150 m open-air range
  • Wide -40 to 85 °C operating range
  • Supplied with two male headers for bench work

Cons

  • Surface-mount module, so it needs PCB assembly rather than simple wiring
  • No antenna design required, but the radio still needs a clean board layout
  • Power supply requirements are not specified in the listing

Best for

Smart lighting control and compact Bluetooth 5.0 mesh projects

Not ideal for

Beginners wanting a plug-and-play USB Bluetooth adapter

Specifications

Item TypeBluetooth Module
Frequency Rating2400 to 2483.5MHz
Model No. / NameTB-03F
Overall Dimension24*16*3(±0.2)MM
PackageSMD-22
Wireless StandardBT 5.0
Transmit Power (dBm)Maximum 10dBm
Receive sensitivity-93dBm±2
InterfaceGPIO/PWM/SPI/ADC/I2S
Operating Temperature (°C)-40℃ ~ 85 ℃
Environmental Temperature (°C)-40 ℃ ~ 125 ℃ , < 90%RH
Transmission DistanceOpen Line of Sight:80m ~ 150m
Shipping Weight0.03 kg
Shipping Dimensions10 × 5 × 2 cm

What's in the box

  • 1 x SmartElex TB-03F Bluetooth Module
  • 2 x Male Headers

Frequently Asked Questions

What is the SmartElex TB-03F used for?
It is a Bluetooth 5.0 module intended for smart lighting control, mesh-style networking and short-range wireless data communication. Its GPIO, PWM, SPI, ADC and I2S interfaces let it drive lighting hardware and read sensors.
What wireless range can I expect?
The stated open line-of-sight range is 80 to 150 metres, supported by up to 10 dBm transmit power and -93 dBm ±2 receive sensitivity. Indoor range will be shorter due to walls and metal obstructions.
What package and size is the module?
It uses an SMD-22 package measuring 24 x 16 x 3 mm with a tolerance of ±0.2 mm. It is designed for surface-mount assembly on a compatible PCB.
What interfaces does it expose?
The module provides GPIO, PWM, SPI, ADC and I2S interfaces. PWM is particularly relevant for dimming and brightness control in lighting applications.
What is included in the package?
The package contains one SmartElex TB-03F Bluetooth Module and two male headers. No antenna or external board is included because the module is a complete SMD part.
What temperature range does it support?
The operating temperature range is -40 to 85 °C, while the environmental rating is -40 to 125 °C at under 90% relative humidity. Keep continuous operation within the narrower operating range.

Overview

The SmartElex TB-03F is a Bluetooth 5.0 module designed for smart lighting control and short-range wireless data communication. It combines a small SMD-22 footprint with a broad set of digital and analogue interfaces, so it can sit directly on a lighting board or a custom carrier PCB and handle both the radio link and the local control signals.

With a 24 x 16 x 3 mm body, the module is easy to place inside compact fixtures and enclosures. It covers the 2400 to 2483.5 MHz band, transmits at up to 10 dBm and receives down to -93 dBm ±2, which supports an open line-of-sight range of about 80 to 150 metres in typical conditions.

Key Features

  • Bluetooth 5.0 wireless standard for modern low-power links.
  • SMD-22 package measuring 24 x 16 x 3 mm (±0.2 mm) for surface-mount assembly.
  • Flexible interfaces: GPIO, PWM, SPI, ADC and I2S.
  • Mesh-style networking for coordinating multiple devices.
  • Wide temperature ratings: -40 to 85 °C operating, -40 to 125 °C environmental at under 90% RH.
  • Compact shipping weight of 0.03 kg for easy integration into small builds.

Specifications Explained

Radio performance

The 2400 to 2483.5 MHz frequency rating places the module in the standard 2.4 GHz band used by Bluetooth. A maximum transmit power of 10 dBm and receive sensitivity of -93 dBm ±2 together support the stated 80 to 150 metre open line-of-sight range. Indoor range will be shorter because walls, metal and furniture absorb or reflect the signal.

Interfaces

GPIO gives general-purpose digital control, PWM is useful for dimming and brightness control, SPI and I2S suit faster data and audio-style links, and ADC lets the module read analogue sensors or inputs. This mix makes the TB-03F adaptable to lighting, sensing and control tasks rather than a single fixed application.

Thermal limits

The -40 to 85 °C operating range covers most indoor and enclosed installations. The wider -40 to 125 °C environmental rating at under 90% relative humidity describes storage and non-operating conditions, so avoid running the module continuously at the upper end of that band.

Compatibility and Requirements

The module is intended for surface-mount assembly on a compatible PCB with an SMD-22 footprint. It requires a host board or microcontroller that can use its GPIO, PWM, SPI, ADC or I2S lines, and it needs a suitable power supply designed for the module. Bluetooth 5.0 links require a compatible Bluetooth 5.0 central device. No antenna design is needed because the module is supplied as a complete SMD part.

Typical Uses

  • Smart lighting control, including dimming and colour-temperature switching.
  • Mesh-style networks linking several fixtures or nodes.
  • Short-range wireless data links in compact enclosures.
  • Sensor and control boards using ADC or GPIO inputs.
  • Prototyping and secondary development of Bluetooth products.

What's in the Box

  • 1 x SmartElex TB-03F Bluetooth Module
  • 2 x Male Headers

Quick specs

Item Type
Bluetooth Module
Frequency Rating
2400 to 2483.5MHz
Model No. / Name
TB-03F
Overall Dimension
24*16*3(±0.2)MM
Wireless Standard
BT 5.0
Transmit Power (dBm)
Maximum 10dBm
See all specifications