
1 / 2 · Click to enlarge
At a glance
Made by SmartElex, this smartelex boost converter modules is a good fit for makers, students and electronics hobbyists. Main specs: manufacturer SmartElex; input voltage 3.7V; output voltage 5.2V DC. Check that your power source supplies 3.7V before connecting it.
Key Highlights
- Rechargeable over USB
- Manufacturer: SmartElex
- Input Voltage: 3.7V
- Output Voltage: 5.2V DC
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Manufacturer | SmartElex |
|---|---|
| Input Voltage | 3.7V |
| Output Voltage | 5.2V DC |
| Max Output Current (mA) | 1000ma |
| Efficiency | High efficiency |
| Additional Specs. | 3.7V from LiPoly/LiIon battery |
| Display Resolution (pixel) | 1280x800 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 11 × 10 × 2 cm |
Overview
The SmartElex Rechargeable 5V Lipo USB Boost @ 1A - 1000C, made by SmartElex, is listed in our smartelex boost converter modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Manufacturer: SmartElex
- Input Voltage: 3.7V (match this to your power supply; too high a voltage can damage the part)
- Output Voltage: 5.2V DC (match this to your power supply; too high a voltage can damage the part)
- Max Output Current (mA): 1000ma (your supply must deliver at least this much current)
- Efficiency: High efficiency
- Additional Specs.: 3.7V from LiPoly/LiIon battery (note the battery type so you can order spares or the right charger)
- Display Resolution (pixel): 1280x800 (measured diagonally; compare with the space you have before ordering)
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The SmartElex Rechargeable 5V Lipo USB Boost @ 1A - 1000C is a compact and efficient DC/DC boost converter that takes a 3.7V LiPoly/LiIon battery and converts it to a stable 5.2V output. It’s perfect for portable projects like Arduino or Raspberry Pi. The module features a 2A internal switch, low battery detection, and excellent efficiency. It also includes a built-in load-sharing charger that can recharge the battery via micro USB while powering the project, allowing uninterrupted operation. The device is small (19mm x 32mm) and lightweight (2.5g), with LED indicators for charge status. Ideal for projects requiring continuous power and battery charging
Features:
- Internal Switch: 2A, with ~2.5A peak limiting.
- Output Current: Delivers 1000mA+ from a 3.7V LiPoly/LiIon battery.
- Low Battery Indicator: LED lights up when the battery is low.
- Built-in Battery Charger: Charges via a micro USB jack at 1000mA max.
- Load Sharing: Automatically switches to USB power when available, allowing for simultaneous charging and boosting.
- 5.2V Output: Provides stable voltage for 5V projects like Arduino or Raspberry Pi.
- Charge Status LEDs: Yellow for charging, green for completed charge.
Package Includes:
1 x SmartElex Rechargeable 5V Lipo USB Boost @ 1A - 1000CQuick specs
- Manufacturer
- SmartElex
- Input Voltage
- 3.7V
- Output Voltage
- 5.2V DC
- Max Output Current (mA)
- 1000ma
- Efficiency
- High efficiency
- Additional Specs.
- 3.7V from LiPoly/LiIon battery



















