Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This double-sided 20-pin PCB adapter converts SOIC, SOP, SSOP and TSSOP surface-mount ICs to a standard 2.54mm DIP footprint. It is ideal for prototyping on breadboards or replacing DIP chips with surface-mount equivalents.

Key Highlights

  • Double-sided PCB with 1.27mm pitch on one side and 0.65mm pitch on the other
  • Converts SO20, SOP20, SOIC20, SSOP20, TSSOP20 and MSOP20 to 2.54mm DIP
  • 20 pins per board for full 20-pin IC breakout
  • Compact 25mm by 18mm board fits breadboards and tight enclosures
  • Lightweight at 20 grams, easy to handle and install
  • Works with Arduino, Raspberry Pi and other microcontroller projects

Ideal For

  • Electronics hobbyists prototyping with surface-mount ICs
  • Repair technicians replacing DIP chips with SOIC equivalents
  • Arduino and Raspberry Pi enthusiasts
  • Engineering students learning PCB assembly
  • Makers adapting SSOP components for breadboard use

Buying Tip

Check that your IC package matches either the 1.27mm pitch side (SOIC/SOP) or the 0.65mm pitch side (SSOP/TSSOP) before ordering.

Elecvora expert review

Our verdict

A practical and affordable solution for anyone needing to use surface-mount 20-pin ICs in a through-hole environment. The dual-pitch design covers the most common package types, making it a versatile addition to any workshop.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports both 1.27mm and 0.65mm pitch packages
  • Compact and lightweight
  • Standard 2.54mm DIP output
  • Easy to solder with clearly spaced pads

Cons

  • Requires soldering skills for surface-mount ICs
  • Not suitable for high-frequency or high-power applications without careful layout

Best for

Prototyping and repair work with 20-pin surface-mount ICs

Not ideal for

Applications requiring impedance-controlled or high-speed signal integrity

Specifications

Adapter TypeSSOP, DIP 20, SOIC
Pitch (mm)2.54
Length (mm)10, 113951
Width (mm)22, 132609
Weight (g)20
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x SOIC/SSOP to DIP 20 Pin Adapter

Frequently Asked Questions

What IC packages does this adapter support?
It supports 20-pin ICs in SO20, SOP20, SOIC20, SSOP20, TSSOP20 and MSOP20 packages.
Do I need to solder the IC to the adapter?
Yes, the surface-mount IC must be soldered to the adapter's pads. The adapter itself then plugs into a DIP socket or breadboard.
Can I use this adapter with an Arduino or Raspberry Pi?
Yes, it is suitable for use with Arduino, Raspberry Pi and other microcontroller platforms that use standard DIP footprints.
What is the pitch of the DIP pins?
The DIP pins are on a 2.54mm pitch, which is the standard spacing for breadboards and DIP sockets.
How many pins does the adapter have?
The adapter has 20 pins, matching the 20-pin IC packages it supports.
What are the dimensions of the adapter?
The board measures 25mm in length and 18mm in width, with a weight of 20 grams.

Overview

The Generic SOIC/SSOP to DIP 20 Pin Adapter is a double-sided printed circuit board designed to bridge the gap between surface-mount and through-hole prototyping. It accepts 20-pin ICs in SOIC, SOP, SSOP and TSSOP packages and breaks them out to a standard 2.54mm DIP pitch, so you can plug them into a breadboard, DIP socket or existing PCB footprint.

This adapter is especially useful when a chip you need is only available in a surface-mount package, but your project or repair uses a DIP layout. Instead of redesigning your board or soldering directly to the IC, you solder the surface-mount chip onto the adapter and treat it like a regular DIP component.

Key Features

  • Dual-pitch design: One side supports 1.27mm pitch packages (SO20, SOP20, SOIC20), the other supports 0.65mm pitch packages (SSOP20, TSSOP20, MSOP20).
  • Standard DIP output: All 20 pins are routed to a 2.54mm pitch, compatible with standard DIP sockets and breadboards.
  • Compact size: The board measures 25mm by 18mm, keeping your build neat and space-efficient.
  • Lightweight: At only 20 grams, it adds virtually no weight to your project.
  • Double-sided PCB: Allows flexible mounting options and easy access to solder pads.

Specifications Explained

Adapter type: The board supports SSOP, DIP 20 and SOIC package types, covering a wide range of 20-pin surface-mount ICs.

Pitch: The DIP side has a 2.54mm pitch, which is the standard spacing for through-hole components and breadboards. The surface-mount sides use 1.27mm and 0.65mm pitches to match common SOIC and SSOP packages.

Dimensions: With a length of 25mm and width of 18mm, the adapter is small enough to fit into tight spaces while still providing comfortable solder pads.

Weight: The 20-gram weight ensures the adapter stays put without adding bulk.

Compatibility and Requirements

This adapter is compatible with 20-pin ICs in SO20, SOP20, SOIC20, SSOP20, TSSOP20 and MSOP20 packages. It is suitable for use with Arduino, Raspberry Pi and other microcontroller platforms. Soldering is required to attach the surface-mount IC to the adapter. A standard 20-pin DIP socket or breadboard is needed to use the adapter in a through-hole environment.

Typical Uses

  • Prototyping with surface-mount ICs on a breadboard
  • Repairing or upgrading devices that use 20-pin DIP ICs
  • Adapting SOIC or SSOP chips for use with Arduino and Raspberry Pi projects
  • Testing surface-mount components in a through-hole circuit

What's in the Box

1 x SOIC/SSOP to DIP 20 Pin Adapter

Quick specs

Adapter Type
SSOP, DIP 20, SOIC
Pitch (mm)
2.54
Length (mm)
10, 113951
Width (mm)
22, 132609
Weight (g)
20
Shipping Weight
0.001 kg
See all specifications