Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual-sided 12 x 12 mm PCB adapter that converts 8-pin SOP, SOIC, TSSOP and SSOP chips to a DIP8 footprint. It offers 1.27 mm and 0.65 mm pitch sides, making SMD chips easier to program or prototype.

Key Highlights

  • Dual-sided PCB with 8 pins per board
  • 1.27 mm pitch side for SO, SOP and SOIC chips
  • 0.65 mm pitch side for SSOP, TSSOP and MSOP chips
  • Compact 12 x 12 mm board weighing about 1 g
  • Suitable for soldering SMD chips or programming setups
  • Header pins not included in the package

Ideal For

  • Electronics hobbyists working with small SMD chips
  • Repair technicians who need a quick DIP8 interface
  • Students learning surface-mount soldering
  • Makers prototyping with SOP, TSSOP or SSOP parts
  • Programmers setting up 8-pin chip programming fixtures

Buying Tip

Check your chip's pin pitch and package type before ordering, and remember that header pins are not included, so add them separately if your setup needs them.

Elecvora expert review

Our verdict

A simple, low-cost adapter that solves a common problem: getting small 8-pin SMD chips into a DIP-style programmer or prototype setup. It works well when the pitch is matched correctly, but it expects you to supply pins and do the soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual-sided design covers both 1.27 mm and 0.65 mm pitch chips
  • Very small 12 x 12 mm footprint and about 1 g weight
  • Supports several common 8-pin SMD package families
  • Useful for programming and prototyping tasks

Cons

  • Header pins are not included
  • Requires soldering and careful pitch matching
  • Not a finished plug-and-play module

Best for

Hobbyists and technicians who need a compact DIP8 interface for 8-pin SMD chips

Not ideal for

Users who want a pre-assembled, solder-free adapter with pins already fitted

Specifications

Adapter TypeSSOP, DIP 8, SOP, TSSOP
Length (mm)12
Width (mm)12
Weight (g)1
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x SOP8 TSSOP8 SSOP8 to DIP8 Adapter

Frequently Asked Questions

Which side of the adapter should I use?
Use the 1.27 mm pitch side for most SO, SOP and SOIC chips, and the 0.65 mm pitch side for most SSOP, TSSOP and MSOP chips. Confirm your chip's pitch before soldering.
Are header pins included?
No, header pins are not included in the package. You will need to supply your own pins or another connection method for your programmer or socket.
Does it require soldering?
Yes, the chip must be soldered to the adapter. Use a fine soldering tip and check for bridges between pins.
What chip sizes does it support?
It is designed for 8-pin SMD chips in SO, SOP, SOIC, SSOP, TSSOP and MSOP packages, with the correct side chosen by pitch.
What are the board dimensions?
The board measures 12 mm by 12 mm and weighs approximately 1 g.
How should I store and handle it?
Keep the board in a dry place and handle it by the edges to avoid contaminating the pads before soldering.

Overview

The Generic SOP8 TSSOP8 SSOP8 to DIP8 Adapter is a small double-sided circuit board that bridges 8-pin SMD packages and a DIP8 layout. Each board has 8 pins, and the two sides use different pitch patterns so a wider range of chip types can be mounted. At 12 mm by 12 mm and roughly 1 g, it takes up very little space on a workbench or inside a project enclosure.

This adapter is aimed at people who need to program, test or prototype with small surface-mount chips but want a DIP-style connection point. It is not a finished cable or socket assembly, so some soldering and planning are part of the job.

Key Features

  • Dual-sided design: one board provides two pitch options for different SMD families.
  • 1.27 mm pitch side: intended for most SO, SOP and SOIC parts.
  • 0.65 mm pitch side: intended for most SSOP, TSSOP and MSOP parts.
  • 8 pins per board: matches standard 8-pin chip layouts.
  • Small footprint: 12 x 12 mm board size keeps builds compact.
  • Lightweight: approximately 1 g per board.

Specifications Explained

Adapter type: the board is listed for SSOP, DIP8, SOP and TSSOP packages. In practice, the pitch pattern on each side determines which chip families fit, so check your chip's pitch before soldering.

Pitch: the 1.27 mm side suits most SO, SOP and SOIC chips, while the 0.65 mm side suits most SSOP, TSSOP and MSOP chips. Matching the pitch correctly is the most important step for a reliable connection.

Size and weight: at 12 x 12 mm and about 1 g, the adapter adds almost nothing to the weight or bulk of a build. Its shipping dimensions of 1 x 1 x 1 cm reflect the small packaged size.

Compatibility and Requirements

The adapter is designed for 8-pin SMD chips in SO, SOP, SOIC, SSOP, TSSOP and MSOP packages, with the correct side chosen according to pitch. It provides a DIP8 footprint for programming or prototyping. Header pins are not included, so you will need your own pins or another method to connect the board to a programmer or socket. Soldering is required to attach the chip to the adapter.

Typical Uses

  • Programming 8-pin SMD chips through a DIP-style programmer connection
  • Prototyping with SOP, SOIC, TSSOP or SSOP parts on a breadboard or DIP socket
  • Repair and testing work where a small SMD chip needs a temporary interface
  • Educational projects that involve surface-mount soldering practice

What's in the Box

The package includes 1 x SOP8 TSSOP8 SSOP8 to DIP8 Adapter. Header pins are not included.

Quick specs

Adapter Type
SSOP, DIP 8, SOP, TSSOP
Length (mm)
12
Width (mm)
12
Weight (g)
1
Shipping Weight
0.001 kg
Shipping Dimensions
1 × 1 × 1 cm
See all specifications