Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This white 14-segment alphanumeric display connects via Qwiic I2C for solderless setup and shows letters, numbers, and symbols. It runs at 3.3V with 128 patterns and 16-step dimming.

Key Highlights

  • White 14-segment digits display letters, numbers, and symbols
  • Qwiic connector for solderless I2C hookup
  • 3.3V operating voltage with integrated RC oscillator
  • 128 display patterns and 16-step dimming
  • Selectable I2C addresses: 0x70, 0x71, 0x72, 0x73
  • Compact module with 13×3 matrix key scan circuit

Ideal For

  • Makers building custom clocks or timers
  • Students learning I2C and display multiplexing
  • Electronics hobbyists adding alphanumeric readouts
  • Prototypers using Qwiic ecosystem boards
  • Educators demonstrating segment displays

Buying Tip

Remember to order a Qwiic cable separately, as it is not included with the display.

Elecvora expert review

Our verdict

The SparkFun Qwiic Alphanumeric Display offers a convenient way to add readable alphanumeric output to 3.3V projects with minimal wiring. Its Qwiic connector and selectable addresses make it easy to integrate multiple units.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Solderless Qwiic connection simplifies setup
  • White 14-segment digits show letters and symbols
  • Selectable I2C addresses allow multiple displays
  • 16-step dimming for brightness control

Cons

  • Qwiic cable not included
  • Requires 3.3V power source only
  • Limited to 128 predefined patterns

Best for

Makers with Qwiic-enabled boards needing alphanumeric displays

Not ideal for

Projects requiring 5V logic without level shifting

Specifications

Model No. / NameAlphanumeric Display
Operating Voltage (V)3.3V
Integrated OscillatorRC oscillator
No. of Segments128 patterns
I2C Address0x70 (0x71, 0x72, 0x73)
Additional Specs.Matrix key scan circuit: 13×3, Dimming circuit: 16 step
Shipping Weight0.01 kg
Shipping Dimensions10 × 6 × 4 cm

What's in the box

  • 1 x SparkFun Qwiic Alphanumeric Display - White

Frequently Asked Questions

What is the operating voltage of this display?
The display operates at 3.3V. Ensure your power supply provides 3.3V to avoid damage.
Does it come with a Qwiic cable?
No, a Qwiic cable is not included. You will need to purchase one separately to connect the display.
Can I use multiple displays on the same I2C bus?
Yes, the I2C address can be set to 0x70, 0x71, 0x72, or 0x73, allowing up to four displays on the same bus.
What characters can it display?
It has 128 predefined patterns, covering letters, numbers, and common symbols.
How do I adjust the brightness?
The display features a 16-step dimming circuit, so you can set brightness in sixteen levels via software commands.
Is soldering required?
No soldering is required if you use a Qwiic cable to connect to a Qwiic-enabled board. However, you may need to solder jumpers to change the I2C address.

Overview

The SparkFun COM-18565 Qwiic Alphanumeric Display is a white 14-segment display module designed to show alphanumeric characters and symbols, not just numbers. Each digit uses fourteen segments to form a wide range of letters, punctuation, and special characters, making it a versatile readout for your electronics projects. The module operates at 3.3V and features a Qwiic connector, so you can link it to your microcontroller with a compatible Qwiic cable—no soldering or voltage level shifting needed.

Key Features

  • White 14-segment display: Displays letters, numbers, and symbols clearly.
  • Qwiic I2C interface: Solderless connection to Qwiic-enabled boards.
  • 128 patterns: Built-in character set covers a broad range of alphanumeric characters.
  • 16-step dimming: Adjust brightness to suit your environment.
  • Selectable I2C addresses: 0x70, 0x71, 0x72, or 0x73 allow multiple displays on one bus.
  • Integrated RC oscillator: Simplifies the driver circuit.
  • Matrix key scan circuit: 13×3 arrangement for efficient control.

Specifications Explained

Operating voltage (3.3V): The module is designed for 3.3V logic systems, which is common on many modern microcontrollers. Ensure your power supply matches this voltage to avoid damage.

I2C address: The default address is 0x70, but you can change it to 0x71, 0x72, or 0x73 via solder jumpers (if present) or configuration. This flexibility lets you use up to four displays on the same I2C bus without an external multiplexer.

128 patterns: The display controller includes a character generator with 128 predefined patterns, covering the alphabet, numbers, and common symbols.

Dimming circuit (16 steps): You can set the brightness in sixteen discrete levels, useful for adjusting visibility in different lighting conditions.

Integrated RC oscillator: The on-chip oscillator reduces external component count and simplifies wiring.

Compatibility and Requirements

The Qwiic Alphanumeric Display requires a 3.3V power source and communicates over I2C. It is compatible with any microcontroller that supports I2C and has a Qwiic connector (or a Qwiic adapter cable). A Qwiic cable is not included, so you will need one to connect the display to your system. No voltage translation is required when used with 3.3V logic devices.

Typical Uses

  • Custom clocks and timers
  • Sensor readouts and data displays
  • Status indicators for embedded projects
  • Educational demonstrations of I2C and multiplexing
  • Interactive art and signage

What's in the Box

1 x SparkFun Qwiic Alphanumeric Display - White

Quick specs

Model No. / Name
Alphanumeric Display
Operating Voltage (V)
3.3V
Integrated Oscillator
RC oscillator
No. of Segments
128 patterns
I2C Address
0x70 (0x71, 0x72, 0x73)
Additional Specs.
Matrix key scan circuit: 13×3, Dimming circuit: 16 step
See all specifications