Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This green alphanumeric display module uses fourteen-segment digits to show letters, numbers, and symbols over I2C. The Qwiic connector lets you plug it in without soldering, making it easy to add text output to any 3.3V project.

Key Highlights

  • Fourteen-segment green digits display letters, numbers, and symbols
  • Qwiic connector for solderless I2C hookup
  • 3.3V operating voltage with no extra level shifting
  • Selectable I2C addresses 0x70 to 0x73 for multiple displays
  • 128 display patterns and 16-step dimming control
  • Compact module with integrated RC oscillator

Ideal For

  • Makers building I2C-based status displays
  • Students learning embedded systems and alphanumeric output
  • Engineers prototyping sensor readouts or control panels
  • DIY enthusiasts adding text feedback to 3.3V projects

Buying Tip

Confirm that your development board operates at 3.3V logic and has a Qwiic connector or accessible I2C pins before purchasing.

Elecvora expert review

Our verdict

The SparkFun Qwiic Alphanumeric Display is a practical solution for adding clear text output to 3.3V projects with minimal wiring. Its solderless connector and selectable addresses make it friendly for beginners and scalable for more complex builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Solderless Qwiic connection speeds up prototyping
  • Fourteen-segment digits support letters and symbols
  • Selectable I2C addresses allow multiple displays
  • Adjustable brightness with 16 steps

Cons

  • Requires a 3.3V logic system for direct connection
  • Limited to I2C communication only
  • No mounting holes or enclosure included

Best for

Makers and engineers needing alphanumeric feedback in 3.3V I2C projects

Not ideal for

Projects running exclusively on 5V logic without level shifting

Specifications

Model No. / NameAlphanumeric Display
Display ColorGreen
Operating Voltage (V)3.3V
No. of Segments128 patterns
I2C Address0x70 (0x71, 0x72, 0x73)
Additional Specs.Matrix key scan circuit: 13×3, Step Dimming Circuit: 16
Shipping Weight0.011 kg
Shipping Dimensions10 × 6 × 4 cm

What's in the box

  • 1 x SparkFun Qwiic Alphanumeric Display - Green

Frequently Asked Questions

What voltage does the display require?
The module operates at 3.3V. Connect it only to a 3.3V power source and logic levels to avoid damage.
Can I use multiple displays on the same I2C bus?
Yes, the I2C address can be set to 0x70, 0x71, 0x72, or 0x73, allowing up to four displays on one bus.
Do I need to solder anything to use this display?
No soldering is required if you use a Qwiic cable with a Qwiic-enabled board. Otherwise, you can solder wires to the I2C pins.
What characters can the display show?
The fourteen-segment digits can display numbers, letters, and various symbols. The module supports 128 display patterns.
Is a cable included in the box?
The package includes only the display module. A Qwiic cable or jumper wires must be purchased separately.
How do I adjust the brightness?
The display has a 16-step dimming circuit. Use the appropriate library commands to set the brightness level.

Overview

The SparkFun Qwiic Alphanumeric Display - Green is a ready-to-use I2C module that goes beyond traditional seven-segment displays. Each digit is made of fourteen segments, allowing you to render letters, numbers, and a variety of symbols in a bright green format. Because it uses the Qwiic connection system, you can plug it into a compatible 3.3V microcontroller or development board without soldering, voltage regulation, or logic-level translation.

Key Features

  • Fourteen-segment green display for alphanumeric characters and symbols
  • Qwiic connector for fast, solderless I2C wiring
  • 3.3V operating voltage matches common logic levels
  • Selectable I2C addresses (0x70, 0x71, 0x72, 0x73) to avoid bus conflicts
  • 128 display patterns and 16-step dimming for flexible output
  • Integrated RC oscillator and 13x3 matrix key scan circuit

Specifications Explained

The 3.3V operating voltage means the module is designed to work directly with 3.3V logic devices, so you do not need a separate power supply or level shifter in most cases. The fourteen segments per digit are what enable alphanumeric output: with more segments than a standard seven-segment display, you can form letters such as A, B, C, and many others, plus punctuation and symbols. The I2C address can be set to 0x70, 0x71, 0x72, or 0x73, which lets you connect up to four displays on the same I2C bus without address conflicts. The 128 display patterns refer to the character patterns the driver can store, giving you a wide range of glyphs. The 16-step dimming circuit lets you adjust brightness in sixteen levels, useful for matching ambient light or reducing glare. The 13x3 matrix key scan circuit is part of the display driver architecture and supports the segment multiplexing.

Compatibility and Requirements

To use this display, you need a 3.3V microcontroller or development board with an I2C interface. A Qwiic-compatible board can connect directly with a Qwiic cable; otherwise, you can wire to the I2C pins (SDA, SCL, power, and ground) using the provided connectors if you prefer. No voltage regulation or translation is required when using a 3.3V system. The module communicates over I2C at the selected address.

Typical Uses

This display is well suited for projects that need to show text or alphanumeric status information: sensor readouts, clock and timer displays, menu systems, status panels, and educational demonstrations of I2C communication. Because it is compact and easy to connect, it works well in prototypes and finished builds alike.

What's in the Box

Package includes: 1 x SparkFun Qwiic Alphanumeric Display - Green.

Quick specs

Model No. / Name
Alphanumeric Display
Display Color
Green
Operating Voltage (V)
3.3V
No. of Segments
128 patterns
I2C Address
0x70 (0x71, 0x72, 0x73)
Additional Specs.
Matrix key scan circuit: 13×3, Step Dimming Circuit: 16
See all specifications