Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SparkFun, this segment displays is a good fit for everyday home and hobby use. Main specs: processor Dual Cortex M0+ processors, up to 133 MHz; additional specs. I/O: 6 dedicated IO for QSPI flash, supporting execute in place (XIP), 30 programmable IO for extended peripheral support; interface SWD.

Key Highlights

  • Processor: Dual Cortex M0+ processors, up to 133 MHz
  • Additional Specs.: I/O: 6 dedicated IO for QSPI flash, supporting execute in place (XIP), 30 programmable IO for extended peripheral support
  • Interface: SWD

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

ProcessorDual Cortex M0+ processors, up to 133 MHz
SRAM264 kB of embedded SRAM in 6 banks
Additional Specs.I/O: 6 dedicated IO for QSPI flash, supporting execute in place (XIP), 30 programmable IO for extended peripheral support
InterfaceSWD
Timer/counterswith 4 alarms
Shipping Weight0.004 kg
Shipping Dimensions10 × 6 × 3 cm

Overview

The SparkFun DEV-18288 Pro Micro - RP2040, made by SparkFun, is listed in our segment displays range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Processor: Dual Cortex M0+ processors, up to 133 MHz (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • SRAM: 264 kB of embedded SRAM in 6 banks
  • Additional Specs.: I/O: 6 dedicated IO for QSPI flash, supporting execute in place (XIP), 30 programmable IO for extended peripheral support (space for firmware, files or media)
  • Interface: SWD (confirm your cable or board uses the same connector)
  • Timer/counters: with 4 alarms
  • Shipping Weight: 0.004 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 6 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SparkFun Pro Micro RP2040 is a low-cost, high-performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the good 'ol Pro Micro footprint, the board also includes a WS2812B addressable LED, boot button, reset button, Qwiic connector, USB-C, resettable PTC fuse, and castellated pads. Supported programming languages MicroPython ,C/C++ Note: For more technical information check Datasheet in the attachment section 

Features:

  1. 264kB of embedded SRAM in six banks
  2. Six dedicated IO for SPI Flash (supporting XIP)
  3. 30 multifunction GPIO
  4. Real time counter (RTC)
  5. Dedicated hardware for commonly used peripherals
  6. Programmable IO for extended peripheral support
  7. Four-channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion
  8. USB 1.1 Host/Device

Package Includes:

1 X SparkFun Pro Micro - RP2040

Quick specs

Processor
Dual Cortex M0+ processors, up to 133 MHz
SRAM
264 kB of embedded SRAM in 6 banks
Additional Specs.
I/O: 6 dedicated IO for QSPI flash, supporting execute in place (XIP), 30 programmable IO for extended peripheral support
Interface
SWD
Timer/counters
with 4 alarms
Shipping Weight
0.004 kg
See all specifications