Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SwiftWing, this drone gps gnss modules and antennas is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.047 kg.

Key Highlights

  • Shipping Weight: 0.047 kg

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Shipping Weight0.047 kg
Shipping Dimensions9 × 9 × 4 cm

Overview

The SwiftWing EDGE-M10 GNSS & Compass Module, made by SwiftWing, is listed in our drone gps gnss modules and antennas range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Shipping Weight: 0.047 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 9 × 9 × 4 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SwiftWing EDGE-M10 GNSS & Compass Module is a professional-grade navigation solution designed for UAVs, autonomous vehicles, robotics platforms, marine systems, and embedded positioning applications. Powered by the advanced u-blox MAX-M10S multi-constellation GNSS receiver and LIS3MDL 3-axis digital magnetometer, the module delivers reliable positioning, fast satellite acquisition, and accurate heading information even in challenging RF environments.

Featuring concurrent support for GPS, Galileo, BeiDou, GLONASS, QZSS, and SBAS, the EDGE-M10 ensures robust global coverage and improved positioning reliability. The integrated 25×25mm ceramic patch antenna, optimized 35×35mm ground plane, and external SAW filter provide enhanced signal reception and superior interference rejection.

With support for navigation update rates up to 10Hz, RF jamming detection, spoofing detection, and seamless compatibility with PX4 and ArduPilot flight controllers, the EDGE-M10 is an ideal choice for professional UAVs, autonomous robots, AGVs, and embedded navigation projects requiring dependable GNSS performance.


Features:

  1. Powered by u-blox MAX-M10S high-performance GNSS receiver
  2. Integrated LIS3MDL 3-axis digital compass for heading reference
  3. Supports GPS, Galileo, BeiDou, GLONASS, QZSS, and SBAS
  4. 25×25mm ceramic patch antenna with optimized 35×35mm ground plane
  5. External SAW filter for improved RF interference rejection
  6. Supports navigation update rates up to 10Hz
  7. RF interference monitoring and jamming detection support
  8. GNSS spoofing detection and signal integrity monitoring
  9. Fast satellite acquisition with hot start in approximately 1 second
  10. Compatible with PX4 and ArduPilot automatic GPS configuration
  11. JST-GH 6-pin interface for easy integration

Specifications:

  1. Product Type : GNSS & Compass Module
  2. GNSS Chipset : u-blox MAX-M10S
  3. Magnetometer : LIS3MDL 3-Axis Digital Magnetometer
  4. GNSS Type : Multi-Constellation GNSS Receiver
  5. Supported Satellite Systems : GPS, Galileo, BeiDou, GLONASS, QZSS, SBAS
  6. Horizontal Position Accuracy : 1.5m CEP (Typical)
  7. Maximum Navigation Update Rate : Up to 10Hz
  8. Tracking Sensitivity : -167 dBm
  9. Reacquisition Sensitivity : -160 dBm
  10. Cold Start Sensitivity : -148 dBm
  11. Supported Protocols : UBX, NMEA
  12. Recommended Baud Rate : 115200 bps
  13. Communication Interface : UART + I²C
  14. Connector Type : JST-GH 6-Pin
  15. Input Voltage : 4.75V – 5.5V DC
  16. Nominal Operating Voltage : 5V DC
  17. Antenna Type : Ceramic Patch Antenna
  18. Antenna Size : 25 × 25 mm
  19. Ground Plane Size : 35 × 35 mm Optimized Ground Plane
  20. PCB Dimensions : 35 × 35 mm
  21. Operating Temperature : -40°C to +85°C
  22. Storage Temperature : -40°C to +85°C
  23. Status Indicators : Power LED, PPS LED
  24. PPS Output : 1Hz Timing Synchronization Indicator
  25. Flight Controller Compatibility : PX4, ArduPilot
  26. Module Height : Approximately 8.4 mm
  27. Mounting Pattern : 30.5 × 30.5 mm
  28. Mounting Hole Size : M2
  29. Weight : 17g

Package Includes:

1 x SwiftWing EDGE-M10 GNSS & Compass Module

Quick specs

Shipping Weight
0.047 kg
Shipping Dimensions
9 × 9 × 4 cm
See all specifications