
1 / 4 · Click to enlarge
At a glance
Made by SwiftWing, this drone gps gnss modules and antennas is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.048 kg.
Key Highlights
- Shipping Weight: 0.048 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.048 kg |
|---|---|
| Shipping Dimensions | 9 × 7 × 7 cm |
Overview
The SwiftWing EDGE-M9N GNSS & Compass Module NEO-M9N, Taoglas Antenna, External LNA & SAW Filter, made by SwiftWing, is listed in our drone gps gnss modules and antennas range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.048 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 9 × 7 × 7 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The SwiftWing EDGE-M9N GNSS & Compass Module is a professional-grade navigation solution engineered for UAVs, autonomous vehicles, robotics, marine systems, surveying equipment, and embedded navigation platforms. Powered by the advanced u-blox NEO-M9N GNSS receiver and LIS3MDL 3-axis digital magnetometer, it delivers precise positioning, reliable heading information, and fast satellite acquisition even in challenging RF environments.
Designed with a premium Taoglas 25×25mm ceramic patch antenna, external MAX2659 low-noise amplifier (LNA), dedicated SAW filter, optimized 35×35mm ground plane, and supercapacitor-assisted backup retention, the EDGE-M9N ensures exceptional signal integrity and dependable navigation performance. Its multi-constellation GNSS capability supports GPS, GLONASS, Galileo, BeiDou, QZSS, and SBAS for enhanced accuracy and reliability.
Features:
- Powered by the high-performance u-blox NEO-M9N GNSS receiver
- Integrated LIS3MDL 3-axis digital magnetometer for accurate heading
- Premium Taoglas CGGP.25.4.E.02 ceramic patch antenna
- External MAX2659ELT low-noise amplifier (LNA) for enhanced signal reception
- Dedicated SAFEB1G57KE0F00R15 SAW filter for superior interference rejection
- Supports GPS, GLONASS, Galileo, BeiDou, QZSS, and SBAS constellations
- RF interference monitoring and GNSS spoofing detection support
- Supercapacitor backup for improved hot-start performance
- Navigation update rate up to 25Hz
- JST-GH 6-pin connector for easy integration
Specifacations :
- Item Type : GNSS & Compass Module
- GNSS Receiver : u-blox NEO-M9N
- Magnetometer : LIS3MDL
- GNSS Support : GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS
- Frequency Band : L1
- Position Accuracy : 2.0 m CEP (Typical)
- Navigation Update Rate : Up to 25 Hz
- Tracking Sensitivity : -167 dBm
- Reacquisition Sensitivity : -160 dBm
- Cold Start Sensitivity : -148 dBm
- Cold Start Time : ~28 seconds
- Hot Start Time : ~1 second
- Communication Interface : UART + I²C
- Protocol Support : UBX, NMEA, RTCM 3.x
- Operating Voltage : 4.75 V – 5.5 V (Nominal 5 V)
- Connector Type : JST-GH 6-pin
- Backup System : Integrated Supercapacitor
- Protection : Resettable Fuse
- Operating Temperature : -40°C to +85°C
- Storage Temperature : -40°C to +85°C
- Antenna Type : Taoglas 25×25 mm Ceramic Patch Antenna
- RF Front End : External MAX2659 LNA + SAW Filter
- Board Size : 35 × 35 mm
- Weight : 17g
Package Includes:
1 x SwiftWing EDGE-M9N GNSS & Compass Module NEO-M9N, Taoglas Antenna, External LNA & SAW Filter
1 x GH Telem Cable



















