Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SwiftWing, this drone accessories is a good fit for RC and FPV hobbyists. Main specs: battery input voltage (v) Recommended : 3S–6S LiPo (11.1–25.2 V); battery connector type XT60 (factory-installed, ~60 A rating); continuous discharge current (a) ~60 A Max. (limited by XT60 connector rating), ~30 Max. (Per XT30 Output). Check that your power source supplies Recommended : 3S–6S LiPo (11.1–25.2 V) before connecting it.

Key Highlights

  • Battery Input Voltage (V): Recommended : 3S–6S LiPo (11.1–25.2 V)
  • Battery Connector Type: XT60 (factory-installed, ~60 A rating)
  • Continuous Discharge Current (A): ~60 A Max. (limited by XT60 connector rating), ~30 Max. (Per XT30 Output)

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Battery Input Voltage (V)Recommended : 3S–6S LiPo (11.1–25.2 V)
Battery Connector TypeXT60 (factory-installed, ~60 A rating)
ESC Output6 × XT30 (factory-installed, ~30 A each)
Input Voltage26 V DC Max.
Continuous Discharge Current (A)~60 A Max. (limited by XT60 connector rating), ~30 Max. (Per XT30 Output)
Mounting Hole Diameter (mm)4 × M3 (45 mm spacing)
PCB layers4-layer, 2 oz copper
Board Size (mm)50 × 50 × 1.6 ±0.15 mm
Weight (g)21
Shipping Weight0.024 kg
Shipping Dimensions7 × 7 × 3 cm

Overview

The SwiftWing PDB-02-XT60-6XT30 3S–6S Power Distribution Board with XT60 & 6 XT30 Connectors, made by SwiftWing, is listed in our drone accessories range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Battery Input Voltage (V): Recommended : 3S–6S LiPo (11.1–25.2 V) (note the battery type so you can order spares or the right charger)
  • Battery Connector Type: XT60 (factory-installed, ~60 A rating) (note the battery type so you can order spares or the right charger)
  • ESC Output: 6 × XT30 (factory-installed, ~30 A each)
  • Input Voltage: 26 V DC Max. (match this to your power supply; too high a voltage can damage the part)
  • Continuous Discharge Current (A): ~60 A Max. (limited by XT60 connector rating), ~30 Max. (Per XT30 Output) (your supply must deliver at least this much current)
  • Mounting Hole Diameter (mm): 4 × M3 (45 mm spacing)
  • PCB layers: 4-layer, 2 oz copper
  • Board Size (mm): 50 × 50 × 1.6 ±0.15 mm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SwiftWing PDB-02-XT60-6XT30 is a high-performance 4-layer power distribution board (PDB) designed for multirotor drones. Supporting 3S–6S LiPo batteries, it features a factory-installed XT60 battery input and six XT30 ESC output connectors, eliminating the need for soldering and simplifying wiring. Built with 2 oz copper layers and an ENIG finish, this compact 50 mm × 50 mm board delivers reliable direct battery bus distribution, ensuring clean, organized integration for quad and hex configurations. Ideal for hobbyists and professional drone builders, it supports high-current applications with robust construction while maintaining a neat, efficient setup for safe and precise flight operations.


Features:

  1. Supports 3S–6S LiPo batteries (11.1–25.2 V)
  2. Factory-installed XT60 battery input connector
  3. Six factory-installed XT30 ESC output connectors
  4. Eliminates need for soldered battery and ESC wiring
  5. Direct battery bus distribution for high-current efficiency
  6. Compact 50 mm × 50 mm footprint
  7. 4-layer PCB with 2 oz copper and ENIG finish
  8. Designed for clean and organized multirotor integration

Package Includes:

1 x SwiftWing PDB-02-XT60-6XT30 3S–6S Power Distribution Board

Quick specs

Battery Input Voltage (V)
Recommended : 3S–6S LiPo (11.1–25.2 V)
Battery Connector Type
XT60 (factory-installed, ~60 A rating)
ESC Output
6 × XT30 (factory-installed, ~30 A each)
Input Voltage
26 V DC Max.
Continuous Discharge Current (A)
~60 A Max. (limited by XT60 connector rating), ~30 Max. (Per XT30 Output)
Mounting Hole Diameter (mm)
4 × M3 (45 mm spacing)
See all specifications