
1 / 4 · Click to enlarge
At a glance
Made by SwiftWing, this drone accessories is a good fit for RC and FPV hobbyists. Main specs: battery input voltage (v) Recommended : 3S–6S LiPo (11.1–25.2 V); battery connector type XT60 (factory-installed, ~60 A rating); continuous discharge current (a) ~60 A Max. (limited by XT60 connector rating). Check that your power source supplies Recommended : 3S–6S LiPo (11.1–25.2 V) before connecting it.
Key Highlights
- Battery Input Voltage (V): Recommended : 3S–6S LiPo (11.1–25.2 V)
- Battery Connector Type: XT60 (factory-installed, ~60 A rating)
- Continuous Discharge Current (A): ~60 A Max. (limited by XT60 connector rating)
Ideal For
- Building or repairing a model
- Upgrading flight performance
- Spares for the field
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Battery Input Voltage (V) | Recommended : 3S–6S LiPo (11.1–25.2 V) |
|---|---|
| Battery Connector Type | XT60 (factory-installed, ~60 A rating) |
| Input Voltage | 26 V DC Max. |
| Continuous Discharge Current (A) | ~60 A Max. (limited by XT60 connector rating) |
| Mounting Hole Diameter (mm) | 4 × M3 (45 mm spacing) |
| PCB layers | 4-layer, 2 oz copper |
| Board Size (mm) | 50 × 50 × 1.6 ±0.15 mm |
| Weight (g) | 21 |
| Shipping Weight | 0.017 kg |
| Shipping Dimensions | 7 × 7 × 3 cm |
Overview
The SwiftWing PDB02-XT60 – 3S–6S Power Distribution Board with XT60 Connector, made by SwiftWing, is listed in our drone accessories range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Battery Input Voltage (V): Recommended : 3S–6S LiPo (11.1–25.2 V) (note the battery type so you can order spares or the right charger)
- Battery Connector Type: XT60 (factory-installed, ~60 A rating) (note the battery type so you can order spares or the right charger)
- Input Voltage: 26 V DC Max. (match this to your power supply; too high a voltage can damage the part)
- Continuous Discharge Current (A): ~60 A Max. (limited by XT60 connector rating) (your supply must deliver at least this much current)
- Mounting Hole Diameter (mm): 4 × M3 (45 mm spacing)
- PCB layers: 4-layer, 2 oz copper
- Board Size (mm): 50 × 50 × 1.6 ±0.15 mm (measure your mounting space before ordering)
- Weight (g): 21 (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The SwiftWing PDB-02-XT60 is a compact and high-current 4-layer Power Distribution Board designed for efficient energy management in multirotor drones and UAV systems.
Supporting 3S–6S LiPo batteries, it features a factory-installed XT60 input connector for quick and reliable power integration. Built with 2 oz copper layers and an ENIG finish, it ensures excellent conductivity and durability under demanding conditions. ESC outputs are provided as solder pads, offering flexibility for custom builds.
Ideal for racing drones, long-range UAVs, and robotics, this board delivers clean power distribution, simplified wiring, and dependable performance in a compact 50 × 50 mm design.
Features:
- Supports 3S–6S LiPo battery input
- Factory-installed XT60 connector for easy setup
- High-current 4-layer PCB design
- 2 oz copper layers for improved conductivity
- Compact 50 mm × 50 mm form factor
- ESC outputs via solder pads for flexible configuration
- Durable ENIG surface finish
- Ideal for drones, UAVs, and robotics applications
Package Includes:
1 x SwiftWing PDB02-XT60 – 3S–6S Power Distribution Board with XT60 ConnectorQuick specs
- Battery Input Voltage (V)
- Recommended : 3S–6S LiPo (11.1–25.2 V)
- Battery Connector Type
- XT60 (factory-installed, ~60 A rating)
- Input Voltage
- 26 V DC Max.
- Continuous Discharge Current (A)
- ~60 A Max. (limited by XT60 connector rating)
- Mounting Hole Diameter (mm)
- 4 × M3 (45 mm spacing)
- PCB layers
- 4-layer, 2 oz copper



















