
1 / 5 · Click to enlarge
AI Summary
A double-sided FR-4 adapter that converts 32 to 100 pin QFP, TQFP, LQFP and FQFP chips to a 2.54mm DIP layout. One board covers both 0.5mm and 0.8mm pitch packages, making it a handy bridge for prototyping and testing MCUs.
Key Highlights
- Double-sided board with 0.5mm pitch and 0.8mm pitch sides
- 0.5mm side supports 32 to 100 pin QFP family packages
- 0.8mm side supports 32 to 64 pin QFP family packages
- Converts surface-mount chips to a 2.54mm DIP footprint
- FR-4 PCB construction in a compact 42 x 33 x 2mm size
- Weighs about 3g, easy to store and fit into projects
Ideal For
- Electronics hobbyists prototyping with QFP and TQFP MCUs
- Students working with ATmega, STM32F or MSP430 chips
- Repair technicians testing surface-mount ICs on the bench
- Makers adapting fine-pitch chips to breadboard layouts
- Engineers building quick test rigs before a custom PCB
Buying Tip
Confirm your chip's pin count and pitch against both sides of the board before ordering, and note the board may arrive in either 46 x 38mm or 41 x 35mm dimensions depending on stock.
Elecvora expert review
Our verdict
A genuinely useful little breakout that covers two common pitches and a wide pin range on one board. It is a low-cost way to get fine-pitch chips onto a breadboard without designing a custom PCB.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two pitch options on a single double-sided board
- Covers 32 to 100 pins across the two sides
- Compact and lightweight FR-4 construction
- Useful across several common MCU families
Cons
- Fine-pitch hand soldering demands care and good tools
- Board dimensions may vary between 46 x 38mm and 41 x 35mm depending on stock
- No socket or headers included, so wiring is up to you
Best for
Breadboard prototyping and bench testing of QFP-family MCUs
Not ideal for
Plug-and-play use without soldering or wiring skills
Specifications
| Adapter Type | DIP, TQFP |
|---|---|
| Dimensions (L x W x H) mm | 42 x 33 x 2 |
| Weight (g) | 3 |
| Color | Green |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x TQFP32/44/64/80/100 to DIP PCB Board Converter Adapter
Frequently Asked Questions
Which side should I use for my chip?
Which chips is this adapter suitable for?
Does the board need a power supply?
What is included with the adapter?
Why might the board size differ from the listing?
How should I care for the board?
Overview
This TQFP32/44/64/80/100 to DIP PCB Board Converter Adapter is a double-sided breakout board for moving surface-mount QFP-family chips onto a standard 2.54mm DIP layout. One side is laid out for 0.5mm pitch packages with 32 to 100 pins, and the other side is laid out for 0.8mm pitch packages with 32 to 64 pins. That gives you two useful footprints in a single small board.
The adapter is built on FR-4 PCB material and measures 42 x 33 x 2mm, weighing roughly 3g. It is aimed at hobbyists, students, repair technicians and engineers who need to prototype, test or socket an MCU without designing a custom breakout first.
Key Features
- Two pitch options on one board: 0.5mm pitch on one side, 0.8mm pitch on the other.
- Wide pin coverage: the 0.5mm side accepts 32 to 100 pin packages; the 0.8mm side accepts 32 to 64 pin packages.
- Standard DIP output: converts fine-pitch surface-mount chips to a 2.54mm DIP arrangement.
- FR-4 construction: a rigid, familiar board material for hand soldering and rework.
- Compact footprint: 42 x 33 x 2mm and about 3g, so it fits neatly into tight builds.
Specifications Explained
Adapter type: the board converts between DIP and TQFP-family packages, so one end is designed for your surface-mount chip and the other presents a DIP-style pin arrangement for wiring or a socket.
Pitch: pitch is the centre-to-centre distance between adjacent pins. The 0.5mm side suits finer-pitch packages with up to 100 pins, while the 0.8mm side suits slightly coarser packages with up to 64 pins. Check your chip's datasheet for both pin count and pitch before choosing a side.
Dimensions and weight: at 42 x 33 x 2mm and about 3g, the board is small and light enough to sit on a breadboard setup or inside a compact enclosure without adding noticeable weight.
Compatibility and Requirements
The adapter is intended for QFP, TQFP, LQFP and FQFP packages within the pin ranges above. It is also listed as suitable for STC89C, ATmega, STM32F and MSP430 series MCUs and other compatible devices. Always confirm your specific chip's package type, pin count and pitch against the board's two sides before soldering. Note that the product may be supplied in one of two board dimensions, 46 x 38mm or 41 x 35mm, depending on stock availability.
Typical Uses
- Prototyping MCU circuits on breadboard or perfboard.
- Testing or reprogramming surface-mount chips outside their final board.
- Repair and diagnostic work where a chip needs to be exercised on a bench.
- Student and hobby projects using STC89C, ATmega, STM32F or MSP430 devices.
What's in the Box
1 x TQFP32/44/64/80/100 to DIP PCB Board Converter Adapter.
Quick specs
- Adapter Type
- DIP, TQFP
- Dimensions (L x W x H) mm
- 42 x 33 x 2
- Weight (g)
- 3
- Color
- Green
- Shipping Weight
- 0.001 kg
- Shipping Dimensions
- 1 × 1 × 1 cm

















