Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact two-channel PWM signal generator delivering adjustable square waves from 1Hz to 150KHz with independent frequency and duty cycle control per channel. It runs from 5-30V DC and includes a Micro USB port and three-button interface for quick on-device or serial setup.

Key Highlights

  • Two independent PWM channels with separate frequency and duty cycle settings
  • Wide 1Hz to 150KHz frequency range across three selectable bands
  • Accepts 5 to 30V DC input for flexible bench and project power
  • Micro USB port plus 9600 bps serial commands for remote control
  • Three-button interface with display for FR1, dU1, FR2 and dU2 parameters
  • Compact 44 x 30 x 11 mm board weighing only 8 g

Ideal For

  • electronics hobbyists building breadboard prototypes
  • Students learning about PWM, duty cycle and signal timing
  • Repair technicians who need a quick adjustable pulse source
  • Makers driving stepping motor driver boards
  • Embedded developers testing microcontroller pulse inputs

Buying Tip

Check that your project can supply 5 to 30V DC and that you have a Micro USB cable and serial terminal ready if you plan to configure the module over the serial link.

Elecvora expert review

Our verdict

A genuinely useful little bench module for anyone who needs two adjustable PWM sources without buying a full lab generator. Its serial commands and three-button interface make it flexible, though it is a bare board rather than a finished instrument.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Two independent channels in a very small footprint
  • Wide 1Hz to 150KHz range with three selectable bands
  • Simple serial command set for remote frequency and duty cycle changes
  • Accepts a broad 5 to 30V DC input

Cons

  • Power supply, USB cable and software are not included
  • Bare board with no enclosure or mounting hardware
  • Serial setup requires a terminal and familiarity with command strings

Best for

Hobbyists and technicians needing a compact dual PWM source for testing and development

Not ideal for

Users wanting a finished, enclosed lab instrument with calibrated output

Specifications

Item TypeSignal Generator
Operating Voltage (VDC)5 to 30
USBMicro USB
Frequency1Hz to 150KHz
Frequency Precision0.02
Operating Temperature (°C)-30 to 60
Dimensions (L x W x H) mm44x30x11
Weight (g)8
Shipping Weight0.012 kg
Shipping Dimensions6 × 4 × 3 cm

What's in the box

  • 1 x 2-Channel PWM Pulse Frequency Adjustable Duty Cycle Square Wave Rectangular Wave Signal Generator Module

Frequently Asked Questions

What frequency range does this module cover?
It generates signals from 1Hz up to 150KHz, split into three bands: 1Hz to 999Hz, 0.1KHz to 99.9KHz and 1KHz to 150KHz.
Can I set the two channels independently?
Yes. PWM1 and PWM2 each have their own frequency and duty cycle, accessed as FR1, dU1, FR2 and dU2 through the SET key.
What power supply does it need?
The module operates from 5 to 30V DC. A suitable power supply is not included, so you will need to provide one.
How do I control it from a computer?
Use a Micro USB connection with a serial terminal set to 9600 bps, 8 data bits, 1 stop bit, no parity and no flow control, then send S1 or S2 command strings.
What is included in the package?
The package contains one 2-Channel PWM Pulse Frequency Adjustable Duty Cycle Square Wave Rectangular Wave Signal Generator Module.
What does a DOWN or FALL reply mean?
After a serial command, DOWN indicates the setting was accepted, while FALL indicates it was not successful and should be checked and resent.

Overview

The Elecvora 2-Channel PWM Pulse Frequency Adjustable Duty Cycle Signal Generator Module is a small, self-contained board that outputs two independent square or rectangular waves. Each channel has its own frequency and duty cycle, so you can drive two devices at once or compare signals during testing. With a frequency span of 1Hz to 150KHz and a 5 to 30V DC input range, it suits breadboard experiments, bench diagnostics and embedded development work where a stable, adjustable pulse source is needed.

Key Features

  • Dual-channel output: PWM1 and PWM2 can be configured separately for frequency and duty cycle.
  • Three frequency bands: 1Hz to 999Hz, 0.1KHz to 99.9KHz and 1KHz to 150KHz, selected by long-pressing the SET key.
  • On-board controls: SET, UP and DOWN keys let you cycle through FR1, dU1, FR2 and dU2 and adjust values directly.
  • Serial control: 9600 bps, 8 data bits, 1 stop bit, no parity, no flow control, with simple S1/S2 command strings.
  • Micro USB port: provides a convenient connection point for serial configuration.

Specifications Explained

The 1Hz to 150KHz frequency range covers slow timing pulses as well as faster clock signals for driver circuits. Frequency precision is listed at 0.02, so repeated settings stay consistent. Duty cycle is adjustable from 001 to 100 on each channel, letting you fine-tune pulse width for motor speed, dimming or logic timing. The 5 to 30V DC operating voltage means the board can share power with many common project supplies, and the -30 to 60°C operating temperature range covers normal indoor and workshop conditions. At 44 x 30 x 11 mm and 8 g, it fits easily into tight builds.

Compatibility and Requirements

The module needs a DC supply within 5 to 30V, which is not included. Serial configuration uses a standard 9600 bps connection with 8 data bits, 1 stop bit and no parity or flow control, and the Micro USB port is provided for that link. No drivers, cables or software are supplied, so plan for your own USB lead and serial terminal if you want remote control.

Typical Uses

  • Generating square waves for experiment and development work
  • Driving the pulse input of stepping motor driver boards
  • Supplying adjustable pulses to a microcontroller during testing
  • Controlling related circuits where PWM sets light intensity or similar behaviour

What's in the Box

1 x 2-Channel PWM Pulse Frequency Adjustable Duty Cycle Square Wave Rectangular Wave Signal Generator Module.

2 Channel PWM Pulse Frequency Adjustable Duty Cycle Square Wave Rectangular Wave Signal Generator Module - Elecvora.in

Quick specs

Item Type
Signal Generator
Operating Voltage (VDC)
5 to 30
USB
Micro USB
Frequency
1Hz to 150KHz
Frequency Precision
0.02
Operating Temperature (°C)
-30 to 60
See all specifications