Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact constant current boost converter that drives LED strings from a 3V to 5V input with up to 40V output and 400mA. Onboard DIP switches let you set the current level without extra components.

Key Highlights

  • Constant current boost topology keeps LED brightness stable
  • 3V to 5V input, output voltage up to 40V
  • Output current up to 400mA, set via DIP switches
  • PWM dimming control for adjustable brightness
  • Efficiency up to 90% with over-voltage protection
  • Compact 25.2mm x 19.0mm x 10.1mm module weighing 3.8g

Ideal For

  • Makers building custom LED filament lamps
  • Embedded electronics developers needing a regulated LED driver
  • DIY lighting hobbyists working with series LED strings
  • Product prototypers testing backlight and indicator lighting
  • Educators demonstrating constant current versus voltage driving

Buying Tip

Check that your LED string's required current falls within the 25mA to 400mA DIP-switch range and that its forward voltage stays under the 40V output ceiling before ordering.

Elecvora expert review

Our verdict

A tidy, well-focused LED driver that solves the brightness inconsistency you get when driving LEDs from a plain voltage booster. The DIP-switch current selection and PWM dimming make it flexible for small lighting builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Constant current regulation suits series LED strings
  • DIP switches set current without extra components
  • Supports PWM dimming for brightness control
  • Compact and light at 3.8g
  • Over-voltage protection and efficiency up to 90%

Cons

  • Input limited to 3V to 5V, so higher supplies need regulation first
  • Maximum 400mA output may be low for high-power LED arrays
  • Soldering is required for permanent installation

Best for

Small LED lighting, filament and backlight projects

Not ideal for

High-power LED arrays drawing well over 400mA

Specifications

Shipping Weight0.01 kg
Shipping Dimensions10 × 8 × 2 cm

What's in the box

  • 1 x Adafruit TPS61169 Constant Current Boost Converter for LEDs
  • 1 x Header Pin

Frequently Asked Questions

What input voltage does this converter need?
It accepts a DC input between 3V and 5V. Use a stable regulated supply within that range for reliable operation.
How do I change the output current?
Use the onboard DIP switches to select a current between roughly 25mA and 400mA. Set it to match your LED string's rating.
Can I dim the LEDs?
Yes. The module supports PWM dimming, so a PWM control signal can adjust brightness while the current setting stays fixed.
What is the maximum output voltage?
The boost stage can produce up to 40V. Your LED string's total forward voltage must stay below that limit.
What comes in the package?
You receive one Adafruit TPS61169 Constant Current Boost Converter for LEDs and one header pin. No power supply or LEDs are included.
How should I handle the board?
Wire it with the power off, confirm polarity before applying power, and check that it stays cool at your selected current during use.

Overview

The Adafruit TPS61169 is a constant current boost converter built for driving LEDs. Where a standard voltage booster holds its output voltage steady, this module regulates the current flowing through the LED string, which is what actually determines brightness and keeps series-connected LEDs evenly lit. It accepts an input of 3V to 5V and steps that up to as much as 40V, delivering up to 400mA of output current.

The board is small, light and ready for embedded or DIY lighting work, and the onboard DIP switches let you choose the current level without adding external sense components.

Key Features

  • Constant current design: regulates LED current for consistent output rather than only voltage.
  • Wide input range: works from a 3V to 5V supply.
  • High output voltage: boosts up to 40V, enough for longer LED strings.
  • Selectable current: DIP switches set output current from about 25mA to 400mA.
  • PWM dimming: brightness can be controlled with a PWM signal.
  • Protection and efficiency: built-in over-voltage protection and efficiency up to 90%.

Specifications Explained

Input voltage (3V to 5V) matches common small power sources such as regulated 3.3V or 5V rails, so the module fits neatly into existing low-voltage projects.

Output voltage (up to 40V) is the ceiling the boost stage can reach. In practice the voltage settles wherever the LED string needs it, while the module holds the current at your chosen level.

Output current (up to 400mA) is the drive limit. The DIP switches let you pick a setting between roughly 25mA and 400mA, which is handy for matching small indicator LEDs or brighter lighting panels.

Internal switch current (1.2A) indicates the headroom inside the converter for stepping up power.

Efficiency up to 90% means most of the input power reaches the LEDs rather than being lost as heat, which matters in enclosed or battery-powered builds.

PWM dimming lets you vary brightness with a pulse-width modulated control signal instead of changing the current setting.

Compatibility and Requirements

The module needs a DC input between 3V and 5V and an LED load wired to its output. Current is configured with the onboard DIP switches, and dimming requires a PWM control signal if you want adjustable brightness. A header pin is supplied for wiring. No other accessories are included.

Typical Uses

  • Driving LED filaments and small lighting panels
  • Backlighting for displays and custom enclosures
  • Custom lighting setups in DIY and embedded projects
  • Series or parallel LED strings needing a regulated current
  • Prototype and test rigs where current must be set quickly

What's in the Box

  • 1 x Adafruit TPS61169 Constant Current Boost Converter for LEDs
  • 1 x Header Pin

Quick specs

Shipping Weight
0.01 kg
Shipping Dimensions
10 × 8 × 2 cm
See all specifications