
1 / 4 · Click to enlarge
AI Summary
This analog EMG sensor detects muscle activity and outputs a 0–3.0V signal proportional to signal strength. It amplifies tiny sEMG signals within ±1.5mV by 1000x while filtering noise for clean, reliable readings.
Key Highlights
- Detects sEMG signals within ±1.5mV range
- 1000x amplification with differential input and analog filtering
- Analog output 0–3.0V referenced at 1.5V
- Metal dry electrode for use without conductive gel
- Wide 3.3–5.5V single-supply operation
- Compact module with PH2.0-3P connector
Ideal For
- Arduino enthusiasts exploring biomedical sensing
- Students and researchers studying sEMG signals
- Makers building gesture or muscle-controlled projects
- Rehabilitation and fitness technology prototypers
- Educators demonstrating human-machine interfaces
Buying Tip
Remember that this sensor outputs an analog voltage, so your microcontroller must have an ADC input; it pairs well with any Arduino board.
Elecvora expert review
Our verdict
This EMG sensor offers a practical way to add muscle sensing to Arduino projects with minimal setup. Its built-in filtering and amplification save time, though it requires careful electrode placement for best results.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated amplification and filtering simplify signal acquisition
- Dry electrode works without conductive gel
- Wide supply voltage range suits many microcontrollers
- Compact and lightweight module
Cons
- Requires a microcontroller with ADC for reading
- Signal quality depends on electrode placement and skin condition
Best for
Arduino users interested in sEMG and muscle-controlled projects
Not ideal for
Those needing clinical-grade EMG measurements or wireless operation
Specifications
| Operating Voltage (V) | 3.3 to 5.5 |
|---|---|
| Detection range | +/-1.5mV |
| Electrode Connector | PJ-342 |
| Module Connector | PH2.0-3P |
| Output Voltage | 0~3.0V |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 8 × 8 × 1 cm |
What's in the box
- 1 x DFRobot Gravity: Analog EMG Sensor by OYMotion
Frequently Asked Questions
What is the detection range of this sensor?
What is the output voltage range?
Can I use this sensor with a 5V Arduino?
Does it come with electrodes?
Do I need conductive gel?
What connector does the module use?
Overview
The DFRobot Gravity Analog EMG Sensor by OYMotion is designed to capture surface electromyography (sEMG) signals, which reflect the electrical activity of muscles. This active sensor module integrates a filtering circuit and an amplification stage to boost weak sEMG signals within ±1.5mV by a factor of 1000. Differential input and an analog filter help suppress noise, particularly power-frequency interference, so you get a cleaner signal for analysis. The output is analog, centered around a 1.5V reference, and swings between 0 and 3.0V depending on muscle activity intensity. Whether you are checking if a muscle is tense or measuring relative strength, this module provides a straightforward way to bring muscle sensing into your Arduino projects.
Key Features
- Metal dry electrode: Long-life electrode works without conductive gel, simplifying setup.
- Differential input: High common-mode rejection ratio helps reject noise.
- Low power consumption: Suitable for battery-powered or portable applications.
- Single power supply: Operates from 3.3 to 5.5V, compatible with common microcontrollers.
- Analog output: 0–3.0V signal with 1.5V reference, easy to read with an ADC.
Specifications Explained
The detection range of ±1.5mV indicates the sensor can pick up very small biopotential signals from muscles. The 1000x amplification brings these microvolt-level signals up to a measurable voltage. The output voltage range of 0–3.0V means you can connect it directly to a 3.3V or 5V ADC input (with appropriate scaling) and observe muscle activity as a varying voltage. The electrode connector is a PJ-342 jack, and the module connector is a PH2.0-3P, making it easy to plug into Gravity-compatible setups or breadboards. Operating voltage of 3.3 to 5.5V gives flexibility across different development boards.
Compatibility and Requirements
This sensor is designed for use with microcontrollers that have an analog-to-digital converter, such as Arduino boards. It requires a single power supply between 3.3V and 5.5V. The PH2.0-3P connector is compatible with Gravity series cables and interfaces. No additional amplification or filtering is needed, as these are built in. The metal dry electrode connects via the PJ-342 jack.
Typical Uses
- Detecting muscle tension or relaxation for interactive projects.
- Monitoring relative muscle strength in fitness or rehabilitation research.
- Building gesture-controlled interfaces using sEMG signals.
- Educational demonstrations of biomedical sensing.
- Prototyping human-machine interfaces.
What's in the Box
- 1 x DFRobot Gravity: Analog EMG Sensor by OYMotion

Quick specs
- Operating Voltage (V)
- 3.3 to 5.5
- Detection range
- +/-1.5mV
- Electrode Connector
- PJ-342
- Module Connector
- PH2.0-3P
- Output Voltage
- 0~3.0V
- Shipping Weight
- 0.02 kg



















