Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 5 V analog pH module for Arduino that reads the full 0-14 pH range through a BNC-connected probe. The Gravity PH2.0 connector plugs directly into an analog input, so you can build a pH meter with minimal wiring.

Key Highlights

  • Reads the full 0-14 pH range with a response time under one minute
  • Gravity PH2.0 connector plugs into any Arduino analog input
  • BNC connector for attaching a pH probe
  • Onboard LED acts as a power indicator
  • Gain adjustment potentiometer for calibrating readings
  • Compact board measuring 43 x 32 mm and weighing 68 g

Ideal For

  • Arduino makers building a DIY pH meter
  • Aquarium and fish tank owners monitoring water
  • Aquaponics and hydroponics hobbyists
  • Students and educators doing water quality experiments
  • Makers building water monitoring stations

Buying Tip

Check that you have a compatible BNC pH probe and a 5 V supply before ordering, since the probe is not part of the module itself.

Elecvora expert review

Our verdict

A tidy, low-cost way to add pH sensing to an Arduino project, provided you already own or buy a suitable BNC probe. The Gravity connector and onboard calibration trim make it approachable for beginners.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple Gravity connector for Arduino analog inputs
  • Full 0-14 pH range with sub-minute response
  • Onboard power LED and gain adjustment potentiometer
  • Compact 43 x 32 mm board

Cons

  • Requires a separate BNC pH probe
  • Needs a 5 VDC supply and an Arduino controller
  • Accuracy depends on proper calibration

Best for

Arduino hobbyists building water quality or aquarium monitoring projects

Not ideal for

Users wanting a standalone handheld pH meter with a display

Specifications

Operating Voltage (VDC)5
Response Time (uS)≤ 1 min
Range0 - 14PH
Operating Temperature (°C)0 to 60
Length (mm)43
Width (mm)32
Weight (g)68
Shipping Weight0.1 kg
Shipping Dimensions21.5 × 9 × 4 cm

What's in the box

  • 1 x DFRobot Gravity Analog pH Sensor

Frequently Asked Questions

Does this module include a pH probe?
The package contains the sensor module only. You need a pH probe with a BNC connector to take readings.
Which controllers can I use it with?
It is designed for Arduino controllers. The Gravity PH2.0 interface plugs into an analog input port.
What voltage does it need?
The module operates on 5 VDC, which matches standard Arduino logic levels.
What pH range can it measure?
It covers the full 0-14 pH range with a response time of one minute or less.
How do I adjust the readings?
Use the gain adjustment potentiometer on the board together with reference solutions to calibrate the output.
What is the power indicator LED for?
The LED shows that the board is receiving power, which helps confirm the wiring is correct.

Overview

The DFRobot Gravity Analog pH Sensor is a small, purpose-built module for turning an Arduino board into a pH meter. It combines a BNC input for a pH probe, a Gravity PH2.0 output for the controller and a gain adjustment potentiometer on one compact board. If you already have a probe, this module gives you a simple way to get pH readings into your project without designing an amplifier circuit yourself.

Key Features

  • Full 0-14 pH measurement range
  • Gravity PH2.0 sensor interface for direct analog input connection
  • BNC connector for the pH probe
  • Power indicator LED
  • Gain adjustment potentiometer for calibration
  • Runs from a 5 VDC supply

Specifications Explained

0-14 pH range: the module covers the complete pH scale, so it can be used for acidic, neutral and alkaline liquids alike.

5 VDC operating voltage: the board is designed to run from a 5 V supply, which matches common Arduino logic levels.

Response time of one minute or less: readings settle quickly, which is useful when you are testing several samples or monitoring a tank.

0 to 60 °C operating temperature: keep the electronics within this range during use.

Compact size: at 43 x 32 mm and 68 g, the board fits neatly into small enclosures and project boxes.

Compatibility and Requirements

The module is intended for Arduino controllers. Connect the pH probe to the BNC connector and plug the PH2.0 interface into an analog input port. A 5 VDC supply is required. Sample code and documentation are available from DFRobot's wiki and product resources.

Typical Uses

  • Water quality testing projects
  • Aquaculture and aquaponics monitoring
  • Fish tank and water tank monitoring stations
  • Educational and hobby electronics builds

What's in the Box

1 x DFRobot Gravity Analog pH Sensor. A pH probe is not included unless stated by the seller.

Quick specs

Operating Voltage (VDC)
5
Response Time (uS)
≤ 1 min
Range
0 - 14PH
Operating Temperature (°C)
0 to 60
Length (mm)
43
Width (mm)
32
See all specifications