
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (vdc) 3.3 to 5.5; output voltage 0~3.0V; probe connector BNC. Check that your power source supplies 3.3 to 5.5 before connecting it.
Key Highlights
- Operating Voltage (VDC): 3.3 to 5.5
- Output Voltage: 0~3.0V
- Probe Connector: BNC
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage (VDC) | 3.3 to 5.5 |
|---|---|
| Output Voltage | 0~3.0V |
| Probe Connector | BNC |
| Signal Connector | PH2.0-3P |
| Measurement Accuracy | ±0.1 at 25℃ |
| Probe Type | Laboratory Grade |
| Detection range | 0~14 |
| Operating Temperature (°C) | 5~60°C |
| Zero Point | 7±0.5 |
| Response Time (uS) | <2min |
| Dimensions (L x W x H) mm | 42mm x 32mm/1.66 x 1.26in |
| Internal resistance (MOhm) | <250MΩ |
| Shipping Weight | 0.34 kg |
| Shipping Dimensions | 24 × 14 × 7 cm |
Overview
The DFRobot Gravity Lab pH Sensor Meter Kit V2, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage (VDC): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
- Output Voltage: 0~3.0V (match this to your power supply; too high a voltage can damage the part)
- Probe Connector: BNC (confirm your cable or board uses the same connector)
- Signal Connector: PH2.0-3P (confirm your cable or board uses the same connector)
- Measurement Accuracy: ±0.1 at 25℃
- Probe Type: Laboratory Grade
- Detection range: 0~14 (quoted range is usually line-of-sight; walls and interference shorten it)
- Operating Temperature (°C): 5~60°C
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
DFRobot Gravity: Analog pH meter V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing. As an upgraded version of ph meter v1 , this product greatly improves the precision and user experience. The onboard voltage regulator chip supports the wide voltage supply of 3.3~5.5V, which is compatible with the 5V and 3.3V main control boards. The output signal filtered by hardware has low jitter. The software library adopts the two-point calibration method, and can automatically identify two standard buffer solutions (4.0 and 7.0), so simple and convenient. you may also check liquid sensor selection guide With this product, the main control board (such as Arduino, and the software library, you can quickly build the pH meter, plug, and play, with no welding.
Connection Diagram:
Useful Link:
https://wiki.dfrobot.com/Gravity__Analog_pH_Sensor_Meter_Kit_V2_SKU_SEN0161-V2
Features:
- 3.3-5.5V wide voltage input
- Hardware filtered output signal, low jitter
- Gravity connector and BNC connector, plug and play, no welding
- The software library supports two-point calibration and automatically identifies standard buffer solution
- Uniform size and connector, convenient for the design of mechanical structures
Package Include:
1 x DFRobot Gravity Lab Grade Analog pH Sensor/Meter Kit V2
Quick specs
- Operating Voltage (VDC)
- 3.3 to 5.5
- Output Voltage
- 0~3.0V
- Probe Connector
- BNC
- Signal Connector
- PH2.0-3P
- Measurement Accuracy
- ±0.1 at 25℃
- Probe Type
- Laboratory Grade




















