
1 / 4 · Click to enlarge
AI Summary
The DFRobot Gravity Lab EC Sensor Meter V2 K1 is an analog electrical conductivity module with a lab-grade BNC probe for measuring aqueous solutions from 1 to 15 mS/cm. Its AC excitation and hardware filtering deliver stable, low-jitter readings with simple two-point calibration.
Key Highlights
- Measures electrical conductivity from 1 to 15 mS/cm
- Wide 3 to 5 VDC input works with 3.3V and 5V boards
- AC excitation reduces polarization for better accuracy
- Hardware-filtered output signal with low jitter
- Gravity and BNC connectors for plug-and-play use
- Software library supports two-point calibration and auto buffer recognition
Ideal For
- Hydroponics growers monitoring nutrient strength
- Aquaculture hobbyists checking water conductivity
- Environmental science students and educators
- Makers building water-quality monitoring systems
- Laboratory technicians needing an analog EC module
Buying Tip
Remember that the probe is laboratory-grade but consumable; plan to replace it after roughly 0.5 years of regular use to maintain accuracy.
Elecvora expert review
Our verdict
The DFRobot Gravity Lab EC Sensor Meter V2 K1 is a solid choice for anyone who needs reliable analog conductivity readings without complex wiring. Its AC excitation and hardware filtering make it noticeably more stable than basic EC modules.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 3 to 5V input works with common boards
- Low-jitter output thanks to hardware filtering
- AC excitation reduces polarization and extends probe life
- Plug-and-play Gravity and BNC connectors
- Software library simplifies calibration and temperature compensation
Cons
- Probe life is limited to about 0.5 years with regular use
- Requires a microcontroller with an analog input
- Measurement accuracy is ±5% full scale, not precision-lab grade
Best for
Hydroponics, aquaculture, and environmental water monitoring projects
Not ideal for
Applications requiring certified laboratory-grade accuracy or long-term unattended deployment
Specifications
| Operating Voltage (VDC) | 3 to 5 |
|---|---|
| Output Voltage | 0~3.4V |
| Probe Connector | BNC |
| Probe | Laboratory Grade |
| Detection range | 1~15ms/cm |
| Operating Temperature (°C) | 0~40℃ |
| Probe Life | >0.5 years (depending on the frequency of use) |
| Cable Length | 1 meter |
| Measurement Accuracy | ±5% F.S |
| Board Size (mm) | 42mm x 32mm/1.65in x 1.26in |
| Shipping Weight | 0.322 kg |
| Shipping Dimensions | 24 × 14 × 7 cm |
What's in the box
- 1 x DFRobot Gravity Lab Grade Analog Electrical Conductivity Sensor
Frequently Asked Questions
What is the detection range of this EC sensor?
Can I use this module with a 3.3V board?
Does it require soldering?
How do I calibrate the sensor?
What is included in the package?
How long does the probe last?
Overview
The DFRobot Gravity Lab EC Sensor Meter V2 K1 is an analog module for measuring the electrical conductivity of aqueous solutions, giving you a practical way to assess water quality. It combines a laboratory-grade probe with a compact board that accepts 3 to 5 VDC, so it works with common 5V and 3.3V main control boards. The design focuses on stable, repeatable readings: the output signal is hardware-filtered to reduce jitter, and the excitation source uses an AC signal to limit polarization effects that can degrade accuracy and shorten probe life.
This V2 version improves on the earlier design with better data precision and a smoother user experience. The Gravity connector and BNC connector make setup straightforward and solder-free, while the software library handles two-point calibration and automatically recognizes standard buffer solutions. An integrated temperature compensation algorithm helps keep measurements consistent across the 0 to 40°C operating range.
Key Features
- Wide voltage input: 3 to 5 VDC for compatibility with both 5V and 3.3V boards.
- Low-jitter output: Hardware filtering smooths the 0 to 3.4V output signal.
- AC excitation: Reduces polarization to improve precision and extend probe life.
- Plug-and-play connectors: Gravity and BNC connectors require no soldering.
- Smart calibration: Two-point calibration with automatic standard buffer solution recognition.
- Temperature compensation: Built into the software library for more reliable results.
Specifications Explained
The 1 to 15 mS/cm detection range covers typical hydroponic nutrient solutions, aquaculture water, and many environmental samples. Measurement accuracy of ±5% full scale gives a clear idea of reading tolerance for monitoring rather than lab-grade certification. The 0 to 3.4V output is an analog signal you read with your microcontroller's ADC, and the 3 to 5 VDC input means you can power it from the same rail as your board. The laboratory-grade probe connects through a 1-meter cable with a BNC connector, and its expected life exceeds 0.5 years depending on how often you use it. The board measures just 42mm x 32mm, so it fits easily into compact enclosures.
Compatibility and Requirements
The module accepts 3 to 5 VDC and is compatible with 5V and 3.3V main control boards. It uses a Gravity connector for the signal and power interface and a BNC connector for the probe. You will need a microcontroller with an analog input to read the 0 to 3.4V output, and the DFRobot software library to perform two-point calibration and temperature compensation. No soldering is required for standard connections.
Typical Uses
- Hydroponic and water culture nutrient monitoring
- Aquaculture water quality checks
- Environmental water detection projects
- Educational and laboratory experiments
- DIY water-quality monitoring systems
What's in the Box
1 x DFRobot Gravity Lab Grade Analog Electrical Conductivity Sensor

Quick specs
- Operating Voltage (VDC)
- 3 to 5
- Output Voltage
- 0~3.4V
- Probe Connector
- BNC
- Probe
- Laboratory Grade
- Detection range
- 1~15ms/cm
- Operating Temperature (°C)
- 0~40℃



















