Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact M5Stack module that drives four encoder DC motors over I2C, with STM32F030 control and BL5617 H-bridge output. It adds AB encoder feedback, duty cycle, position and speed modes, plus INA199 current monitoring for closed-loop motion projects.

Key Highlights

  • Four-channel encoder motor driver built around STM32F030 and BL5617
  • I2C control at address 0x24 with support for slave address changes
  • AB pulse encoder inputs for position and motion state feedback
  • Duty cycle, absolute position and speed adjustment control modes
  • INA199 power monitor for real-time current and voltage readings
  • Selectable DC 5V or external 6-12V motor power input

Ideal For

  • Robot builders controlling four encoder DC motors from one board
  • Automation equipment developers needing I2C motion control
  • Makers building intelligent vehicles with position feedback
  • Laboratory device projects requiring current and voltage monitoring
  • Industrial automation prototyping with compact driver hardware

Buying Tip

Confirm your motors have AB quadrature encoders and that your host can use I2C address 0x24, since the encoder feedback and bus address are central to how this board is controlled.

Elecvora expert review

Our verdict

A well-integrated four-channel driver that pairs encoder feedback with I2C control and current monitoring in a small footprint. It is a sensible choice for robot and automation projects that need coordinated motor movement rather than simple switching.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Four motor channels with AB encoder inputs on one compact board
  • Duty cycle, absolute position and speed control modes
  • INA199 current and voltage monitoring built in
  • Unified HY2.0mm-6P interfaces simplify wiring
  • Selectable DC 5V or external 6-12V motor supply

Cons

  • Requires encoder-equipped motors to use feedback features
  • Motor supply is limited to the stated 6-12V range
  • Operating temperature is restricted to 0-40 °C

Best for

Robot and automation projects needing four encoder motors under I2C control

Not ideal for

High-voltage or outdoor installations outside the stated supply and temperature range

Specifications

Item TypeDual Motor Driver
Driver ICBL5617
Power Supply Voltage (V)6-12V
ChipPower Supply - NA199
Power ConsumptionMax 10
Communication Interface0x24
Standby current(mA)[email protected], [email protected]
Operating Temperature (°C)0-40
Length (mm)54
Width (mm)54
Weight (g)15.9
Shipping Weight0.06 kg
Shipping Dimensions10 × 7 × 3 cm

What's in the box

  • 1 x M5Stack 4-Channel Encoder Motor Driver Module (STM32F030) v1.1
  • 4 x HY2.0-6P single-ended cable (20 cm)
  • 4 x PH2.0-6P connector
  • 1 x DC5521 female to XT30 female cable

Frequently Asked Questions

How many motors can this module drive?
It drives up to four DC brushed motors, each with its own channel and encoder input.
What communication interface does it use?
The module uses I2C at address 0x24, and the slave address can be modified when needed.
What motor supply voltage is supported?
Motor power can come from DC 5V or an external DC 6-12V source, selected with the onboard switch.
Does it support encoder feedback?
Yes, AB pulse encoder inputs allow position and motion state detection for closed-loop control.
What control modes are available?
You can use duty cycle control, absolute position positioning and speed adjustment, including forward, reverse, stop and brake functions.
What is included with the module?
The package includes the driver module, four HY2.0-6P single-ended cables, four PH2.0-6P connectors and a DC5521 female to XT30 female cable.

Overview

The M5Stack 4-Channel Encoder Motor Driver Module v1.1 is a motion control board for projects that need more than simple on/off motor switching. It combines an STM32F030 controller with a BL5617 H-bridge driver to operate four DC brushed motors, while AB pulse encoder inputs let the host read back position and motion state. The board measures 54 x 54 mm and weighs 15.9 g, so it fits neatly into compact robot chassis and control enclosures.

Communication is handled over I2C using the 0x24 address, and the slave address can be modified when several modules share a bus. An onboard switch lets you choose between a DC 5V supply and an external DC 6-12V motor supply, and the INA199 power monitor reports current and voltage so you can keep an eye on load conditions.

Key Features

  • Four motor channels: drive four DC brushed motors from one board.
  • STM32F030 plus BL5617: dedicated control and H-bridge driver stages.
  • Encoder feedback: AB pulse inputs support position and motion state detection.
  • Flexible control modes: duty cycle, absolute position positioning and speed adjustment.
  • I2C interface: fixed default address 0x24 with support for slave address modification.
  • Power monitoring: INA199 circuit provides real-time current and voltage information.
  • Simplified wiring: unified HY2.0mm-6P interfaces reduce cable count.

Specifications Explained

The 6-12V motor supply range suits small DC gearmotors and similar actuators, while the onboard switch also allows a DC 5V input option. Standby current is specified at 35.03 mA with a DC 6V supply and 19.25 mA at DC 12V, which helps you plan idle power draw. Maximum power consumption is rated at 10 W, so keep motor loads within that budget. The operating temperature range of 0-40 °C points to indoor or climate-controlled installations. Each channel uses the HY2.0mm-6P connector format, and the module ships with matching cables and PH2.0-6P connectors.

Compatibility and Requirements

The module communicates over I2C, so your host controller needs an available I2C bus and must support the 0x24 address or a modified slave address. Motor power comes from either the DC 5V input or an external DC 6-12V source through the onboard switch. Encoder-equipped motors are required to use the AB pulse feedback features. The included DC5521 female to XT30 female cable supports connecting a suitable power source. No other platform-specific libraries or certifications are stated in the product data.

Typical Uses

This driver suits robot motion control, automation equipment, intelligent vehicles, laboratory devices and industrial automation systems. It is particularly useful where four independently controlled motors with position feedback are needed in a small footprint.

What's in the Box

  • 1 x M5Stack 4-Channel Encoder Motor Driver Module (STM32F030) v1.1
  • 4 x HY2.0-6P single-ended cable, 20 cm
  • 4 x PH2.0-6P connector
  • 1 x DC5521 female to XT30 female cable

Quick specs

Item Type
Dual Motor Driver
Driver IC
BL5617
Power Supply Voltage (V)
6-12V
Chip
Power Supply - NA199
Power Consumption
Max 10
Communication Interface
0x24
See all specifications